• Voice VLAN over Telco Bridge

    I have two vlans going over a Telco Bridge to 5 locations each with one SIP Phone. The main location has an shdsl of 2mbs and each location has a speed of 512kbps. I can't get all locations to work together only 2 locations at a time. What could be the problem? Any help is welcome.

    JDirksen20 pointsBadges:
  • VLAN filter implementation configuration commands

    how to do vlan filter implementation in cisco 6506 switch.

    Vlanfilter5 pointsBadges:
  • How to allow outside access to internal pc securely

    Hi all, I need to allow an outside service engineer connect to a machine tool (PC attached) to run diagnostics on my network. What's the best way to allow him temperorily access to this internal pc? This will probably only happen a few times a month, so access doesn't have to be enabled...

    Pandub130 pointsBadges:
  • VLAN per switch limitation?

    I have a Minolta server and copier which need to communicate across two switches - where these switches have a vlan per switch limitation. From what I can see in a Wireshark sample, the printer is trying to establish communications with the server using broadcast traffic. Is is possible for this...

    Smidgen5 pointsBadges:
  • Combining Networks with Same IP Scheme, VLAN,

    Hi, We are combining an couple offices next week & i need some advice. The networks already have VLANs set up. we have a Cisco 3550 Layer 3 switch set up to route traffic. The servers are on this site also. The network IP's are 10.1.1.x, 10.1.4.x & 10.1.5.x. Servers reside on all of those networks....

    Ramii5 pointsBadges:
  • Doing VOIP on a network

    What is the difference between setting up only QoS or doing a VLAN?

    ThisPhoneGuy5 pointsBadges:
  • VLAN help, routing?

    I have some Powerconnect 6248 Layer 3 switches that I'm working with. I've never worked with VLANs before so I'm totally lost here. I don't know CLI so I'm using the GUI. I have workstations and servers set up on 192.168.0.x/255.255.255.0, workstations on 192.168.1.x/255.255.255.0, and workstations...

    Solareclipse235 pointsBadges:
  • VLAN subnetting

    I have a domain controller running in 2000 and running an exchange server 2003 in a member server also have files servers and one DHCP server. These are in 192.168.0.0 range. This NW have total of 230 clients .So we need to isolate 50 clients from this network and put it on VLAN because the 50...

    sumeshbnr1,675 pointsBadges:
  • layer2 VLAN IP transit

    do you need to have IP transit in order for Layer2 VLAN service to work?

    TigerTea5 pointsBadges:
  • error (25) cannot connect on socket netbackup 6.5

    Hi I have a test network consisting of a windows server 2003 Domain Controller, a windows server 2003 with netbackup 6.5, and a Netapps filer, all on the same isolated VLAN. All windows servers are updated with the latest updates. I am able to add the Filer under NDMP hosts, and the credentials...

    Bkupmatt5 pointsBadges:
  • Microsoft deployment toolkit

    I have MDT server on my network and i have more than one VLANs.But i have failed to boot from the MDT server when am on the LAN on which the server was not configured.Can anyone help me tell me how i can cross MDT to all VLANs on the network?

    Mubs110 pointsBadges:
  • Trunking 3Com with Cisco

    I want to connect Vlans in cisco 3750 with Vlans 3Com SuperStack 3 Switch 4200, by using trunking ports in the cisco and 3Com switches. please some one help me how to configure the trunk port in both switches.

    Qma15jo55 pointsBadges:
  • ciscl acl

    i have 3 core switches having 40 vlans users in vlan 40 only communicate with vlan 40 and other should  be deny except one ip 192.168.5.25 can access to vlan. no hsrp for the vlan 40 configured. root bridge for vlan 40 is core 3 switch. i try various ways but i am not able to do exact and specific...

    Ekansh400 pointsBadges:
  • Problem VLAN DHCP Server

    Hi my friends! Here is my problem: I have a Switch L3 Dell Power Connect 6248 which has VLANs configured on it. Each VLAN is a LAB. Port 2: vlan2. 172.31.2.x Port3: vlan3. 172.31.3.x I have a DHCP Server Windows Server 2008 connected directly on port 20 of thiw switch and this server has th ip...

    Mdurra25 pointsBadges:
  • Cisco ACL deny icmp

    I have three cisco core 4506 and working with 20 different vlans. i am trying to create deny icmp for vlan 67 subnet 192.168.40.0 255.255.255.224. i tried in many way but i am fail. any host can ping to this subnet and this subnet can ping to any host. but i want to deny for both.  

    Ekansh400 pointsBadges:
  • Setting up Cisco 2950 switch

    Hello, New to itknowledge exchange... I have a hand me down Cisco 2950 12 port switch. I currently have assigned to my Cable Modem4 Static Public IP's Note: Not real but used for example. 70.66.131.1 70.66.131.2 70.66.131.3 70.66.131.4 I run 3 servers in my basement all of which I have configured...

    Perkster5 pointsBadges:
  • HSRP in cisco

    I have L3 core switches, I want to configure HSRP for vlan 30, Please verify my configuration. My active router should be core 3 switch. Core swith 1 interface Vlan30  description ***Wireless Network Vlan***  ip address 192.168.21.252 255.255.254.0  no ip redirects  no ip unreachables  no ip...

    Ekansh400 pointsBadges:
  • Cisco Catalyst vlan 2950

    I have a cisco catalyst 2950 24 port and i have a Linksys 48 port 10/100 + 2-Port Gigabit Smart Switch. When i do the VLan on Cisco Catalyst Switch and daisy chain the linksys to it, would it let me configure the port on linksys (my answer is no) … just checking. Also, when i daisy chain off of...

    Kwt712555 pointsBadges:
  • VLan Cisco 2950

    I am in need of some serious help. Please see the URL where i put in my question and scenario http://www.4shared.com/file/127413877/2f6e1b34/cisco2950.html

    Kwt712555 pointsBadges:
  • setup VLAN

    I have a cisco catalyst 2950 24port. I would like to setup 3 different vlans. Can someone email me the commands or configuration as to how i setup for example 8 ports for 192.168.9.x, 8 ports for 192.168.31.x, and 8 ports for 192.168.35.x ... thank you in advance

    Kwt712555 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following