• Recommendation for Layer 3 switch and firewall

    Our school division is made up of seven schools. All schools point back to the central office location where all Internet traffic comes through. I have to setup subnets and VLANS at each school. Can you recommend a make/model of layer 3 switches for each school and for the main central office...

    Skenny175 pointsBadges:
  • How to add an Additional Domain controller in an existing environment and promote it as Domain Controller

    Our environment contains two domain controllers with windows 2003 as O/S with the ip 10.0.2.12/8 and 10.0.2.13/8. Due to old hardware we want to install our domain controllers on new hardware with different IP as 192.168.15.1/24 and 192.168.15.2/24. Please provide me the steps to install the...

    Biabani5 pointsBadges:
  • VLAN routing Cisco 2960

    I have 2 VLAN  VLAN and VLAN2  in a 2960 cisco switch .I need to route betwwen VLANS .Here is my question  can I use a AASTARO firewall to route this ? or do I need cisco router? VLAN protocol is 802.1q Thanks

    sumeshbnr1,675 pointsBadges:
  • Network issue (high replies between vlans)

    Hi guys, I´m facing the following problem: I´ve been receiving latency responses from different L2 switches, specifically from machines attached to each of them. Attached you could se an image of what I have.

    Samuel8520 pointsBadges:
  • Vlan on netgear switch Gs748t

    I have a switch netgear prosafe gs748t. I want to divide this switch so it can manage two networks. x.x98.x and x.x.8.x. I have a sonicwall firewall that I'm planning to connect from interface x4 to this switch. Right now the x4 interface is handling the x.x.98.x network with dhcp. I would like to...

    Iarbe0015 pointsBadges:
  • DHCP for VLANs

    How can I configure DHCP on router for multiple VLANs?

    Itisabhijit5 pointsBadges:
  • Configuring VLANs

    Hello All; If I'm configuring multiple VLANs on a Layer 3 switch (HP) do I have to setup static routes or will the switch learn them automatically? Also if I have multiple VlAN's on the Layer 2 switches that connect to the Layer 3 do I have to setup port trunking in order for traffic to be able to...

    Drainey0 pointsBadges:
  • Smoothwall School Guardian and New VLANs

    I was wondering if someone could help me with the specifics of how to set up a VLAN for the network using Schoolguardian. I do not have formal network training and so I feel very inadequate to tackle this project, but it just needs to be done and so any help would be very appreciated…Current...

    Techobi25 pointsBadges:
  • Connecting switches to the router

    hi  david, Ihave five computers connected to switch1 iwant them in Vlan1 and another five computers connected to another switch2  iwant them inVln2 then the2swiths connetd to switch3 then router wht should I do to onfig this network

    Mahmoudkdry5 pointsBadges:
  • Configuring Multiple VLANS on two NetGear FS726T switches Linked

    Hi, I am not a network specialist so hope you can help. I have had a read through the documentation regarding VLANS on the FS726T switch but am unsure whether want want to do is correct. I have a Kaliedescape movie system with the server & one player connected to one switch (SW2) & two more players...

    Hifisi5 pointsBadges:
  • Access lists- host1 should not ping host2 but host2 can ping host1

    hello everyone i'm junell i'm currently studying access list right now doing exercises on packet tracer. i have made two vlans (vlan10 & vlan20). the policy is vlan10 should not ping vlan20 but vlan20 can ping van10. what hapened is  if i configure vlan10 unabe to acces vlan20 which is right. the...

    Junell5 pointsBadges:
  • VLAN DHCP problem between Router and Switch

    I have a Cisco SA520 Router connected to a Netgear FS726TP Switch. Router has 3 Vlans.  Management VLAN 1 /29  Hosts VLan 5 /27  VoIP Vlan 10 /27  Router Ports 1 and 2 are setup up identically, in Trunk Mode each port and all VLAN's should be accessible through it.  Port 3 Vlan 5  Port 4 Vlan...

    Sirexilon5 pointsBadges:
  • HP Procurve Issue Passing Multiple VLANs over a link

    Hey everyone, just to start off with I am a Cisco guy that got placed into an HP project. Basic topology overview from outside in: ASA 5505 with two Ethernet connections to a 2910-24 port switch. This switch is then (Cisco Trunking) to a 2626 switch passing vlan (1 untagged and 100 tagged)between...

    MichaelRWat5 pointsBadges:
  • Cisco switch configuration?

    [strong]I have one distribution switch(Cisco) and linked to many access swtitches(d-link) what type of configuration should I do???[/strong] [strong]No VLAN in my network[/strong]

  • Bind IP subnet to VLAN in Dell L3 switch

    when I bind an IP subnet to dell 6224 switch, does it mean when i plug in a pc within tat particular subnet will directly be in that VLAN? Example: i type in "vlan association subnet 10.0.1.0 255.255.255.0 10" to bind subnet 10.0.1.0 to VLAN 10. so is it when i plug in a PC with IP 10.0.1.30 into...

    IEIE1235 pointsBadges:
  • Fortinet Firewall in transparent mode over VLAN Trunk 802.1Q

    We have a fortigate firewall in transparent mode. WAN interface is on VLAN 10 and INTERNAL interface is on VLAN 20. If I connect a server behind VLAN 20 on the switch where the firewall is connected everything works fine. The problem is when I connect to another switch that is getting VLAN 20 over...

    Ccipanama5 pointsBadges:
  • Fileserver with VLANs

    I am building a network for a client and currently he has 2 different business sharing a files-server (all under the same roof, same owner). Currently in order to separate the two out he is manually adding folder permissions for each workgroup that he has (he doesn't run a domain and this is not...

    Agentcrtr5 pointsBadges:
  • Can Linksys BEFSR81 router be used to facilitate inter-vlan communication

    I am new to networking. I have created two vlans using a linksys SRW2016 switch. I assigned members to each valans. The member within a vlan can ping each other, but members between VLANs cannot ping. I was told that I need a router to get the inter-vlan communication working. I have a Linksys...

    Pokkam525 pointsBadges:
  • VLAN or not!!!

    I have a sytem operating via the internet that provides remote control for VHF radio transmitters. It operates using static i/p's at both termination points with the routers forwarding ports 5004, 5006 and 5008 to the private i/p of each device. To operate, each device has to be configured with the...

    Marine32085 pointsBadges:
  • Setup VLAN for two IP/Subnets

    I need to setup a VLAN on a Cisco 2950 to communicate between two ip/subnets Main LAN 10.66.x.x/16 Secondary LAN 192.168.0.xxx/24 Need each network be able to talk to the other.  I am new to routers and looking for help

    Jrn235 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following