VLAN Setup

VLAN for Public Wifi

Hi, I was hoping someone could help me out with my HP ProCurve 4208vl switch.  It's in a mostly default configuration: switch (default vlan) ip: 10.1.1.95 default gateway: 10.0.0.1 / 255.0.0.0. I would like to create a second VLAN for a Public Access WiFi.  I have a DHCP server running on one...

VLANS and cisco 2960 switch

VLANS and cisco 2960 I have a new cisco 2960 switch gig 0/1 connecting to a 3560 on gig0/9. the problems is my vlans will not come up. I have configured another switch the same exact way and it works fine. The only line in the commands of bith switches that is different is ip http secure-server. ...

setup VLAN

I have a cisco catalyst 2950 24port. I would like to setup 3 different vlans. Can someone email me the commands or configuration as to how i setup for example 8 ports for 192.168.9.x, 8 ports for 192.168.31.x, and 8 ports for 192.168.35.x ... thank you in advance

I want use a D-link Dir-600 router that will sit behind a Cisco router with 2 vlans

I have an application where I have setup a Cisco 1841 router with 2 vlan connection's, I want to setup a wireless D-link DIR-600 wireless router on one of vlans so visiting venders can get to the internet without being on my network. Do I need to setup the D-Link router with any VLan...

Using VLANs so segregate traffic with machines with identical IP address

I am a newbie: I have four boxes A1,A2,A3,A4 that need to communicate with 4 other boxes B1,B2,B3,B4 with these "permutations": A1 needs to communicate with B1,B2,B3,B4 A2 needs to communicate with B1,B2,B3,B4 A3 needs to communicate with B1,B2,B3,B4 A4 needs to communicate with B1,B2,B3,B4 For...

vlan setup

I have a 48 port linksys/cisco switch that i want to split between two subnets, .0 and .9. How can i setup a vlan to distinguish between two or if i wan to setup 3 different subnet. I am new to this, any help with some examples as to how to setup would be greatly appreciated

VLAN setup and configuration

We have 2 switches with different ip range say 10.1.10.0 and 10.1.15.0.I want to connect both the switches with same vlan say vlan 4 so that they can communicate.switch 1 should be valn 2 and vlan 4 but switch 2 should be vlan 4.

Configuring Qtrunk ports on FS728TS Switch

I need to connect two switch FS728TS. I have 3 Vlan in each switch. How can I configure the common ports of every switch to achieve the 6 Vlans traffic flow on this link

How can i configure a port for multiple vlan at Netgear FS728TS (like "trunk port" at cisco switch)

i have an Netgear FS728TS switch and i have to use 2 vlan with an cisco switch. (i have no problem about cisco switch configuration) vlan name=Default vlan ID=1 vlan name=AP vlan ID=307 there is F/O cable connection between two switches. 1/g1 port using for this F/O connection at Netgear...

Setting up Cisco 2950 switch

Hello, New to itknowledge exchange... I have a hand me down Cisco 2950 12 port switch. I currently have assigned to my Cable Modem4 Static Public IP's Note: Not real but used for example. 70.66.131.1 70.66.131.2 70.66.131.3 70.66.131.4 I run 3 servers in my basement all of which I have...