• VLAN subnetting

    I have a domain controller running in 2000 and running an exchange server 2003 in a member server also have files servers and one DHCP server. These are in 192.168.0.0 range. This NW have total of 230 clients .So we need to isolate 50 clients from this network and put it on VLAN because the 50...

    sumeshbnr1,675 pointsBadges:
  • Configuring VLANs with ActionTec M1000

    I am attempting to configure two VLANs with a NetGear FS726T switch without success. What I am trying to do is to have one VLAN which would be used by the staff to access to anything on the network and a second VLAN for guests to use to access only the Internet. In a reply to a previous post I was...

    Krused135 pointsBadges:
  • Vlans problem

    i created new vlan, the clients cand ping see shared folders but cant receive reports from the Epicor server, while clients in old vlans can

    Qma15jo55 pointsBadges:
  • Switch Vlan

    how can a vlan member communicate to the different vlan member?

    Pankajsuryan5 pointsBadges:
  • How to create VLAN with this Cisco configuration

    Dear Sir, I have 1) DNS & Exchng Server 2003 with DHCP enabled Win2003 Standard Edtn SP2 , 2) ISA 2006 3) Trend Micro Antivirus Server. I have to create VLAN for 3 Dept. with having 3750 Cisco Switch as routing ( Trunk ) Using 2950 Cisco Switch 2950 VLAN10 High management VLAN11Low management...

    Abduljaleel5 pointsBadges:
  • Cisco 2811 VLAN Usage

    I inherited a network that has a Cisco 2811 router setup with the following: interface FastEthernet0/0 no ip address no ip route-cache cef no ip route-cache duplex full speed 100 ! interface FastEthernet0/0.18 description Data VLAN encapsulation dot1Q 18 native ip address 10.221.18.1 255.255.255.0...

    Zwitter1535 pointsBadges:
  • Cisco: Setting a VLAN across a network

    hi,newbie here :) I am working on Packet Tracer 5.0 and I want to setup 2 vlan's that spread across a network. I attach the view of the network: 2 of 3 hosts on switch 1 belong in vlan10 and the other one belongs to vlan20. Likewise, 2 of 3 hosts on switch 2 belong to vlan10 and the other one...

    Teo20 pointsBadges:
  • VLAN route on a stick

    Hello Guys I have some concern regarding my VLAN route on a stick, I created 6 VLAN's on Cisco 1841 router in Ethernet port 0/0 with Local IP 192.168.2.x then I created sub interface in the same ethernet port0/0.10, port0/0.11, port0/0.14, port0/0.15 all VLAN's route to my local default gateway...

    Bsm122045 pointsBadges:
  • VLAN configuration – vlan become a member of 2 trunk port

    is it possible vlan become a member of 2 trunk port

    Danial370 pointsBadges:
  • How can i configure a port for multiple vlan at Netgear FS728TS (like “trunk port” at cisco switch)

    i have an Netgear FS728TS switch and i have to use 2 vlan with an cisco switch. (i have no problem about cisco switch configuration) vlan name=Default vlan ID=1 vlan name=AP vlan ID=307 there is F/O cable connection between two switches. 1/g1 port using for this F/O connection at Netgear switch. in...

    Myselfziro5 pointsBadges:
  • VLAN setup and configuration

    We have 2 switches with different ip range say 10.1.10.0 and 10.1.15.0.I want to connect both the switches with same vlan say vlan 4 so that they can communicate.switch 1 should be valn 2 and vlan 4 but switch 2 should be vlan 4.

    Philip315 pointsBadges:
  • What is a non-routable VLAN? Why would you use one?

    I've heard the term "non-routable VLAN" but am not sure what exactly it means, why it exists or when it's used. It would seem perhaps just by definition that it's an existing virtual local area network (VLAN) that just doesn't have a VLAN interface created for it anywhere on purpose. Do you use it...

    NetworkingATE1,545 pointsBadges:
  • Need help with VLAN configuration

    I have a router connected with Fast Ethernet to switch in VTP Server Mode (containing 2 VLANs) and then connected to a switch in transparent mode with three VLANs and after it a single switch in client mode. All these switches belong to the same domain and I have done interVLAN routing in it and...

    NetworkingATE1,545 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following