• Fileserver with VLANs

    I am building a network for a client and currently he has 2 different business sharing a files-server (all under the same roof, same owner). Currently in order to separate the two out he is manually adding folder permissions for each workgroup that he has (he doesn't run a domain and this is not...

    Agentcrtr5 pointsBadges:
  • Can Linksys BEFSR81 router be used to facilitate inter-vlan communication

    I am new to networking. I have created two vlans using a linksys SRW2016 switch. I assigned members to each valans. The member within a vlan can ping each other, but members between VLANs cannot ping. I was told that I need a router to get the inter-vlan communication working. I have a Linksys...

    Pokkam525 pointsBadges:
  • Configuring trunk port in Dell PowerConnect 6248

    when i configured trunk port in dell 6248 switch, it gets hangs. what the issue. also it won't allow vlan-1 traffic to pass through. Pls. suggest what to do??

    Sdm5 pointsBadges:
  • Different Vlans can communicate

    I have two PC connected on a single switch under different vlans ,,, now i want both to talk to each other how this is possible

    Surajg5 pointsBadges:
  • NAT configuration

    i have three vlans of private addreses that obtain their addresses through dhcp..now i need to translate these private addreses to public addresses using dhcp! i need help

    Ropam25 pointsBadges:
  • Merging Home Network With Cisco Lab

    I currently have 3 Cisco routers, 2 L3 Switches and 4 L2 Switches. I ran a cable from my home Cisco wireless E3000 router to one of my L3 Switches. I converted the switch port that its plugged into as a routed port and to obtain an address using dhcp, which it did grab one. I tested connectivity to...

    Santucci475 pointsBadges:
  • How to extend VLANs across WAN link

    How do I extend 2 vlans over a WAN link. I'm using 2 routers and simulated the WAN by connecting 2 paradyne modems back to back with a cross cable. both routers are seeing each other. switch-> router1->modem->modem->router2->workstations. I need to be able to see the vlans on router...

    Ryswick20 pointsBadges:
  • Cisco 2960 configuration

    Hi all- I need help with a new 2960 that i configured a second vlan. the default vlan1 im able to access the network and internet but the PCs connected to the ports on vlan2 i dont get any connection in the switch i did the #ip add 10.0.2.1 to vlan2 and when i do a ipconfig in the pc i see a...

    OutlookLess5 pointsBadges:
  • VLAN implementation

    Why do we need to implement VLAN in our Network and how to configure a switch to be part of a VLAN

    Oluwethu20 pointsBadges:
  • Multiple Vlans with two router on a stick in the same network.

    Hello Guys.. I have some problem with existing router on a stick Vlan consist of six VLAN ID, I try to add additional router with route on a stick VLAN with different VLAN ID in the same network, the problem is this new VLAN cannot access to the network it seem like the packet of this new VLAN...

    Bsm122045 pointsBadges:
  • Inter Vlan Routing

    Hello. I have 5 vlans working on my network i.e 192.168.80.0, 81.0, 82.0, 83.0, 84.0, 85.0 . i have one core switch where all L2 switches are connected. and router is connected with L2 switch. caz its in another building so cant connect with L3 3750 switch. and i have configured 5 subinterfaces in...

    Dave5305 pointsBadges:
  • D-link des3526 switch configuration, can only ping one of two servers.

    Port assigned for vlan1 is 1 to 25, port assigned for vlan2 is 26. I could ping gateway or browse  internet from vlan1. But from vlan2 I can not ping or browse. 

    Bjh5 pointsBadges:
  • Allowing Vlans between Cisco L3 switch and 3 com Layer2 switch.

    Hello All, I have a cisco Cat 3560G switch trunked to a 3com 4200 L2 switch. I have 4 Vlans created on the Cisco L3 switch like Vlan 10, 20, 30 and 40 and created only 20 and 30 on the 3 COM. All the trunk port configurations are fine. However when i assign a PC to any existing Vlan in the 3 COm...

    AmeenM5 pointsBadges:
  • VLAN Configuration help, 3com 4500 26port

    [u3:p][/u3:p] Create vlansAdd ports to vlansSet port 1 as trunk and also added as tagged to all vlans At port 1 i connect my adsl modem router (dhcp enabled). 4500 switch gets 192.168.1.100 as it's ip but all other computers can't get their ip by the dhcp if they are connected via 4500...

    Makrib5 pointsBadges:
  • COMMUNICATION OF CLIENTS WITH SERVER IN DEFERENT SITE WINDOWS SERVER 2008

    we are running four domain controllers all are windows server 2008 enterprise. we have a considerably big network with almost 20 vlans (eg 192.168.10.0,192.168.11.0,...192.168.49.0)we have made four different sites and have added subnets and servers to the sites according to their nearest...

    Uvullas15 pointsBadges:
  • getting VLAN working between netgear switch fs726t and WG102 AP

    Hi everyone, Im setting this up for a church and well stright to the point..... I am trying to set up 2 SSID's on the AP both on diffrent VLANS I have a cisco 1700 router connected to the switch(FS726T) and have VLANs configured already on both the router and switch. (They work) On the switch I...

    Davidbrown0020 pointsBadges:
  • Multiple VLANS and using two internet sources

    I have a T1 from my telephone provider. I also am installing Cable internet. I need to point my Administration vlan to the cable and my student vlan to the T1. But my Verticle voip phone system runs a phone management app that needs to stay on the Administration vlan and point to the T1. My goal...

    Ithitter5 pointsBadges:
  • how many vlans for telepresence switch 3750?

    how many vlans for telepresence switch 3750? I did data vlan,video vlan, voice vlan and management vlan. am I still left any vlans? by the way, what book is good for telepresence configuration?

    Nilar5 pointsBadges:
  • VLAN setup

    We have a very simple network setup using static IP throughout our campus. We are now looking at using DHCP to provide internet only access to our clients and students who bring their own IT equipment on site. Whilst we have networking and IT experience we have not touched VLANs before at all. We...

    Matt715 pointsBadges:
  • VLAN filter implementation configuration commands

    how to do vlan filter implementation in cisco 6506 switch.

    Vlanfilter5 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following