Multiple Vlans with two router on a stick in the same network.
Hello Guys.. I have some problem with existing router on a stick Vlan consist of six VLAN ID, I try to add additional router with route on a stick VLAN with different VLAN ID in the same network, the problem is this new VLAN cannot access to the network it seem like the packet of this new VLAN...
Hello Guys.. I have some problem with existing router on a stick Vlan consist of six VLAN ID, I try to add additional router with route on a stick VLAN with different VLAN ID in the same network, the problem is this new VLAN cannot access to the network it seem like the packet of this new VLAN...
35 pts.
VLAN subnetting
I have a domain controller running in 2000 and running an exchange server 2003 in a member server also have files servers and one DHCP server. These are in 192.168.0.0 range. This NW have total of 230 clients .So we need to isolate 50 clients from this network and put it on VLAN because the 50...
I have a domain controller running in 2000 and running an exchange server 2003 in a member server also have files servers and one DHCP server. These are in 192.168.0.0 range. This NW have total of 230 clients .So we need to isolate 50 clients from this network and put it on VLAN because the 50...
Configuring VLANs with ActionTec M1000
I am attempting to configure two VLANs with a NetGear FS726T switch without success. What I am trying to do is to have one VLAN which would be used by the staff to access to anything on the network and a second VLAN for guests to use to access only the Internet. In a reply to a previous post I was...
I am attempting to configure two VLANs with a NetGear FS726T switch without success. What I am trying to do is to have one VLAN which would be used by the staff to access to anything on the network and a second VLAN for guests to use to access only the Internet. In a reply to a previous post I was...
Configuring VLANs on NetGear FS726T Switch
I am not a trained network specialist, but I'm installing a network at our church. We have a NetGear FS726T switch and a WG102 access point. We want to have to two VLANs: one to be used by the staff with full access to all of the devices on the network and to the Internet; and the other to be used...
I am not a trained network specialist, but I'm installing a network at our church. We have a NetGear FS726T switch and a WG102 access point. We want to have to two VLANs: one to be used by the staff with full access to all of the devices on the network and to the Internet; and the other to be used...
Configuring VLAN's on two HP procurve switches
Hi all, Trying to route a new ISP(Microwave link) from one of my out building to my computer room and hence my firewall. Old ISP came direct into firewall. In the outbuilding the Microwave modem connects with cat5 to HP Procurve 2524 switch. Because this ISP is coming through my internal network,...
Hi all, Trying to route a new ISP(Microwave link) from one of my out building to my computer room and hence my firewall. Old ISP came direct into firewall. In the outbuilding the Microwave modem connects with cat5 to HP Procurve 2524 switch. Because this ISP is coming through my internal network,...
Vlans problem
i created new vlan, the clients cand ping see shared folders but cant receive reports from the Epicor server, while clients in old vlans can
i created new vlan, the clients cand ping see shared folders but cant receive reports from the Epicor server, while clients in old vlans can
How to create VLAN with this Cisco configuration
Dear Sir, I have 1) DNS & Exchng Server 2003 with DHCP enabled Win2003 Standard Edtn SP2 , 2) ISA 2006 3) Trend Micro Antivirus Server. I have to create VLAN for 3 Dept. with having 3750 Cisco Switch as routing ( Trunk ) Using 2950...
Dear Sir, I have 1) DNS & Exchng Server 2003 with DHCP enabled Win2003 Standard Edtn SP2 , 2) ISA 2006 3) Trend Micro Antivirus Server. I have to create VLAN for 3 Dept. with having 3750 Cisco Switch as routing ( Trunk ) Using 2950...
VLAN configuration - vlan become a member of 2 trunk port
is it possible vlan become a member of 2 trunk port
is it possible vlan become a member of 2 trunk port
VLAN route on a stick
Hello Guys I have some concern regarding my VLAN route on a stick, I created 6 VLAN's on Cisco 1841 router in Ethernet port 0/0 with Local IP 192.168.2.x then I created sub interface in the same ethernet port0/0.10, port0/0.11, port0/0.14, port0/0.15 all VLAN's route to my local default gateway...
Hello Guys I have some concern regarding my VLAN route on a stick, I created 6 VLAN's on Cisco 1841 router in Ethernet port 0/0 with Local IP 192.168.2.x then I created sub interface in the same ethernet port0/0.10, port0/0.11, port0/0.14, port0/0.15 all VLAN's route to my local default gateway...
Cisco: Setting a VLAN across a network
hi,newbie here :) I am working on Packet Tracer 5.0 and I want to setup 2 vlan's that spread across a network. I attach the view of the network: 2 of 3 hosts on switch 1 belong in vlan10 and the other one belongs to vlan20. Likewise, 2 of 3 hosts on switch 2 belong to vlan10 and the other...
hi,newbie here :) I am working on Packet Tracer 5.0 and I want to setup 2 vlan's that spread across a network. I attach the view of the network: 2 of 3 hosts on switch 1 belong in vlan10 and the other one belongs to vlan20. Likewise, 2 of 3 hosts on switch 2 belong to vlan10 and the other...
Multiple VLANs with Local DNS
Hello Guys, I configured router on a stick with multiple VLAN's in cisco 1800 I noticed this error when add VLAN 5 my local dns won't resolve the URL request, but my first,second & third VLAN's are working fine you can surf to the internet using my local dns. is there a limitation of VLAN's in...
Hello Guys, I configured router on a stick with multiple VLAN's in cisco 1800 I noticed this error when add VLAN 5 my local dns won't resolve the URL request, but my first,second & third VLAN's are working fine you can surf to the internet using my local dns. is there a limitation of VLAN's in...
Configuring trunk port in Dell PowerConnect 6248
when i configured trunk port in dell 6248 switch, it gets hangs. what the issue. also it won't allow vlan-1 traffic to pass through. Pls. suggest what to do??
when i configured trunk port in dell 6248 switch, it gets hangs. what the issue. also it won't allow vlan-1 traffic to pass through. Pls. suggest what to do??
Bind IP subnet to VLAN in Dell L3 switch
when I bind an IP subnet to dell 6224 switch, does it mean when i plug in a pc within tat particular subnet will directly be in that VLAN? Example: i type in "vlan association subnet 10.0.1.0 255.255.255.0 10" to bind subnet 10.0.1.0 to VLAN 10. so is it when i plug in a PC with IP 10.0.1.30 into...
when I bind an IP subnet to dell 6224 switch, does it mean when i plug in a pc within tat particular subnet will directly be in that VLAN? Example: i type in "vlan association subnet 10.0.1.0 255.255.255.0 10" to bind subnet 10.0.1.0 to VLAN 10. so is it when i plug in a PC with IP 10.0.1.30 into...
VLAN setup and configuration
We have 2 switches with different ip range say 10.1.10.0 and 10.1.15.0.I want to connect both the switches with same vlan say vlan 4 so that they can communicate.switch 1 should be valn 2 and vlan 4 but switch 2 should be vlan 4.
We have 2 switches with different ip range say 10.1.10.0 and 10.1.15.0.I want to connect both the switches with same vlan say vlan 4 so that they can communicate.switch 1 should be valn 2 and vlan 4 but switch 2 should be vlan 4.
Separation of Physical Networks via VLANs and Security Issues Therein
Our company is looking to redo some networking infrastructure. Previous IT administrators created a daisy chain network topology and all information types, from APs to workstations aggregate on a single network. Lately we have seen some performance issues and wish to rewire much of our network...
Our company is looking to redo some networking infrastructure. Previous IT administrators created a daisy chain network topology and all information types, from APs to workstations aggregate on a single network. Lately we have seen some performance issues and wish to rewire much of our network...
Cisco 2811 VLAN Usage
I inherited a network that has a Cisco 2811 router setup with the following: interface FastEthernet0/0 no ip address no ip route-cache cef no ip route-cache duplex full speed 100 ! interface FastEthernet0/0.18 description Data VLAN encapsulation dot1Q 18 native ip address 10.221.18.1...
View Answer
| Mar 22 2009 2:10 AM GMT
Cisco 2811 configuration, Cisco VLAN, Cisco router configuration
I inherited a network that has a Cisco 2811 router setup with the following: interface FastEthernet0/0 no ip address no ip route-cache cef no ip route-cache duplex full speed 100 ! interface FastEthernet0/0.18 description Data VLAN encapsulation dot1Q 18 native ip address 10.221.18.1...
View Answer
| Mar 22 2009 2:10 AM GMTCisco 2811 configuration, Cisco VLAN, Cisco router configuration
How can i configure a port for multiple vlan at Netgear FS728TS (like "trunk port" at cisco switch)
i have an Netgear FS728TS switch and i have to use 2 vlan with an cisco switch. (i have no problem about cisco switch configuration) vlan name=Default vlan ID=1 vlan name=AP vlan ID=307 there is F/O cable connection between two switches. 1/g1 port using for this F/O connection at Netgear...
i have an Netgear FS728TS switch and i have to use 2 vlan with an cisco switch. (i have no problem about cisco switch configuration) vlan name=Default vlan ID=1 vlan name=AP vlan ID=307 there is F/O cable connection between two switches. 1/g1 port using for this F/O connection at Netgear...
VLAN basics step by step
Currently have a Windows 2003 enviornment using DHCP with Cisco switches in a single subnet with no VLAN's. Want to take the Layer 3 switch and Layer 2 switches and configur it all with 4 VLAN's. (Servers, users, printers, guests) My users will need to access the servers (file, e-mail, etc..) so...
Currently have a Windows 2003 enviornment using DHCP with Cisco switches in a single subnet with no VLAN's. Want to take the Layer 3 switch and Layer 2 switches and configur it all with 4 VLAN's. (Servers, users, printers, guests) My users will need to access the servers (file, e-mail, etc..) so...
