• Client Access Timeout Error CWBC01048

    We have installed the IBM Client access v5r3 software. When we connect to AS400 server using Client Access we are getting a time out error (CWBC01048). We were able to connect to the server using TELNET and also ping to the server.

    Ben Rubenstein6,225 pointsBadges:
  • Drive Space- What commands are useful in monitoring and checking available drive space for IBM Iseries server

    What commands are useful in monitoring and checking available drive space for IBM Iseries server. I have Version 5 release 3 installed.

    Clwaid25 pointsBadges:
  • Adding Disk Units to model 9406-800

    Hello Have a client at V5R3. Before I can upgrade them, I had to order 2 additional disk units. I will need to install them. Not being a hardware guy, I am not really sure what is involved. I was told that I just had to pull off the front panel, and then, pop the new disk into the empty slots. From...

    Piano520 pointsBadges:
  • Automatic Storage Overflow MCH4299

    Recently when running the daily backup I began getting an MCH4299 error, "One of the automatic storage stacks X'00000001' for the thread has overflowed or a storage access beyond the maximum size of a teraspace automatic storage stack was attempted." This particular server is v5r3. Can anyone tell...

    anncyb80 pointsBadges:
  • Deleting the physical files without deleting logical files

    Hi, Can anybody tell me how to delete the physical file(PF-DTA) without deleting its dependent files (LF). Actually we are having Mimix running in our live and DR system, in the DR I want to delet PF only and resync with the live.

    Syedm180 pointsBadges:
  • Retain leading zeroes with CPYTOIMPF

    I am copying a PF from the iSeries (V5R3M0) using Cpytoimpf, within the file is an alpha field with leading zeros. When the file is opened in Excel it drops the leading zeros. Assuming it is a numeric field, is there any way to retain the leading zeros?

    AmandaC30 pointsBadges:
  • AS/400 upgrade for hardware and OS

    Hello, our customer has an i550 box with a V5R3 running on it. We are planning to upgrade both the hardware as well as the OS and the disk towers have consumed huge space. Not sure which one to proceed first as we thought that upgrading the hardware & then OS will be better, but the customer...

    harisudhan211,005 pointsBadges:
  • iSeries navigator error message

    I am having problem opening navigator. I have v5r3 service S128055 error cwbunnav.exe when opening. Any assistance is needed.

    Diego20 pointsBadges:
  • Upgrading system from V5R3 to V5R4

    Hi, I need to upgrade the system from V5R3 to V5R4. I need to know that are there any RPG , iLE, CL, Cobol commands that have changed. Which would require code change to incorporatte the upgraded version. Can someove help me out how to find such commands.

    Anks15 pointsBadges:
  • Error Code CWBDB0014

    I have a system running OS level V4R3 and using Client Accesss V5R3 when I try using data transfer to iseiries I'm encoutering the error CWBDB0014, is my CA still supported with my current OS level?

    Mhelo5 pointsBadges:
  • COBOL/400 subfile single page load(page by page load)

    Hi! can any one give me sample code of cobol/400 program which loads a subfile records page by page. My problem here is I am able to code page by page records loading from a PF but when the Subfile is dispalyed it is not properly displaying the pages. Fro example after loading and displaying the...

    AS400Prathap5 pointsBadges:
  • Modify QINACTITV to a limited number of users

    Sir, how do you configure a limited number of users where the objective is that the session of these users will not automatically sign-off. Because the way i understand it, this is done using WRKSYSVAL SYSVAL(QINACTITV) but this approach will affect all users and this is not what i intend to do. i...

    danmd5systemad370 pointsBadges:
  • Hold parameter in batch job

    why should we give the hold paramater (*yes) in a batch job? please let me the what is a a batch job?

    Batchjob10 pointsBadges:
  • Complete installation of Function Availability in iSeries Navigator

    Sir :        How do i complete the installation of additional FUNCTION AVAILABILITY under MANAGEMENT CENTRAL in iSeries Navigator since the function i need like MONITORS (i need this for the statistics) is labeled as NOT INSTALLED. This is also noticeable in My Connections where under a...

    danmd5systemad370 pointsBadges:
  • How to come up with storage statistics on iSeries 820

    Sir: As per requirement again from our 3rd party vendor in assessing our prod iseries 820 for system performance fine-tuning:      "System storage information – Size and percentage allotted to SIBS and other system, usage, backup in the prod server."       The main concern of the 3rd...

    danmd5systemad370 pointsBadges:
  • ODBC problem Changing Structure Table

    I have a client program conncected via odbc to AS400, I defined a structure table (DDS) in the AS400 that the client program use, then I had to change the length of numeric field (3 to 8) but the client program not recognized. What I have to do?

    pmalopez5 pointsBadges:
  • MQ Series for AS/400

    I would like to know which version of MQ series is best suited for AS/400 V5R3.

    AS10 pointsBadges:
  • New IBM monitors not created

    I'm trying to create a message monitor, setup works fine with no errors but when I click the OK button the monitor isn't listed in the window. I don't see the monitor anywhere, I don't get any messages, and there isn't anything in the joblog that even hints at an issue. I also tried a job monitor...

    Jim328100 pointsBadges:
  • Restore System 38 file to iSeries V5R3

    I've been trying to restore a file from our old system. The backup was taken by reel tape then migrated to another media format (e.g. 3590) now I am trying to restore the file, unfortunately I cannot. What command should I use to restore? Screenshot from DISPLAY TAPE...

    Jedlasquite360 pointsBadges:
  • AS400 – Sysopr MSG ” CHG0064″

    Message ID "CHG0064" Message   "Please mount the tape from Account Reconcilemnet Services"  ( G C)  &n Recovery. . . . :   Enter 'G' when ready or 'C' to cancel.   What it means and what steps should be taken? Thanks.  

    Syedm180 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following