• How to configure data VLANS through PMP450 radio

    Hello, we have bought a PMP450 radio to upgrade from 8meg of 4E1s to 100meg capacity. Its installed on a remote site through a CMM to a metro Ethernet switch then to the core network. How would I configure data VLANS through this radio to a customer for internet service and how would I manage it...

    samabo5 pointsBadges:
  • Carrier SIP trunking

    What hardware resources does a carrier need to deploy SIP Trunking Services to current TDM users?

    Jaimito15 pointsBadges:
  • Enabling communication between different VLANs using switches

    I have 3 switches A, B and C; connected to each other (may or may not be a trunk link). Switch A has a user at VLAN 10 and Switch C has a user at VLAN 10. Any communication between A & C has to pass through Switch B. So can Switch A user ping the user at Switch C, if yes how? if no why?

    NetworkingATE1,545 pointsBadges:
  • setting up a TRUNK on cisco switch

    I want to know if there is a to combine different subnet on one cisco 2950 switch with trunking ... i have .0, .31. and .9. If someone can give me an example. that would be wonderful. Right now i have one trunk going to the attic switch from the main switch room which is .35.

    Kwt712555 pointsBadges:
  • 4 VLANS, 3 locations, 3 Routers, No communication between Lans or VLANs

    OK, here is my problem, I'm working on a project in the Test phase right now. I have 3 routers (Cisco 2811s), all running EIGRP, these are seperating 3 goegraphical regions. Each of these Routers is linked via Trunking line to a Switch which has 4 VLANs enable. According to everything I have found...

    CRagsdale32755 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

Thanks! We'll email you when relevant content is added and updated.