• Print Image File in iSeries

    Hi, I would like to ask for help to use the data type field GRAPHIC in iSeries. Can I save an image file into this field type? If so, how do I do this? I have tried but it always shows an error of character conversion not valid. Please help. Regards, Tony Tam

    Tonytam0 pointsBadges:
  • Tape Media Library and BRMS

    Environment: OS/400 V5R2; Tape Library: IBM 3570. Problem: during backup operations using TAPMLB01 thru BRMS, message CPF416A is issued. When we try to change the status of the resource TAP05 associated with TAPMLB01 we get message CPF67E4. However, it is possible to get the 3570 work manually with...

    Masquita0 pointsBadges:
  • File transfer to the iSeries problem.

    I am trying to transfer an excel speadsheet file to my AS/400. I have tried setting up a file transfer through client access and tried sending the file directly from Excel. Both times I get the following error cwbtf0023 - pc file description file was not specified or is empty The file is not empty....

    Bkr0963c0 pointsBadges:
  • reusedlt *yes

    Hi, Has reusedlt *yes behavior changed with V5R3? When I add a record to a PF that is reusedlt *yes in V5R2 is uses a record that has been deleted, however when i do the same thing on a V5R3 system it adds a new record rather than re-use one. Anyone run into this before? Thanks, Luis

    Xixones0 pointsBadges:
  • journal entry’s entry specific data

    Hi, I am trying to extract fields from security audit events. The problem comes when dealing with entry specific data field. This field contains lot of info which varies according to the entry type. Is there any API which returns information present in the entry specific data portion in a...

    Pprasad1230 pointsBadges:
  • Is *JOBCTL needed to view job logs?

    I have read IBM's Security manual and Work Management manual and I know that *JOBCTL is needed to change job priorities and other things for jobs on the system, but I do not see any statements that say *JOBCTL is needed to view the job logs of other user's jobs on the system. Does anyone know if...

    Bkr0963c0 pointsBadges:
  • OS/400 System Security; Limiting User Capabilities

    We have set up our AS/400 user profiles with Limit Capabilities *NO. However, this does not keep them from being able to enter a command on a command line. How do we accomplish this?

    Mgramly0 pointsBadges:
  • Deleting journal receivers

    HI, When I try to delete a journal receiver that hasn't been saved, I get the "never fully saved" message even though I'm using DLTOPT(*IGNINQMSG) Does anyone have a piece of code that will get rid of receivers no matter what? E.G. not saved, remote, attached...... Thanks

    Xixones0 pointsBadges:
  • iseries system management monitor

    Hi, I'm looking for a iseries system management monitor tool. I found one at www.tango04.com, Visual Message Center, but my question is; are there other alternatives available? These monitors can run on Windows or Linux platform, a gui would be nice.

    RainbowSolutions0 pointsBadges:
  • Need some performance tuning tips or suggestions.

    We currently have a 720-9406 model iSeries AS/400 system. We recently upgraded are OS to version V5R3M0. We are using the system mainly for our payroll processing which occurs weekly, as well as we have the system set up as a web server which we have employees accessing throughout the day. Since...

    Bkr0963c0 pointsBadges:
  • capture PLC-data in our LAN

    Our PLC-vendor is going to provide us collected PLC-data on a server in our LAN. Are sockets (port higher then 1024) the best way to do this? As we are AS/400-minded people, will FTP resolve this with the same performance? Or are there other possibilities? Please, please, give us some guidelines.

    Hahajokes5 pointsBadges:
  • Too high % temp. addr. in WRKSYSSTS – AS/400 aka iSeries

    In WRKSYSSTS the temp. addr. is too high and not getting lower after IPL. % perm addresses . . . . : 0,128 % temp addresses . . . . : 10,453 Can anybody tell me how to get this % lower? thnx Rita

    Ritakrop0 pointsBadges:
  • Can you transfer active jobs to another subsystem?

    If a job is already active in one subsystem, can you use tfrbchjob or tfrjob to move into a different job queue to run in a different subsystem, or will you get errors because the job is already active in one subsystem?

    Bkr0963c0 pointsBadges:
  • How To Print A Hardware Configuration List?

    Does anyone know of another command to use to print out a hardware configuration list for the AS/400. I have already used the following command: DSPHDWRSC TYPE(*AHW) OUTPUT(*PRINT) Is there anything else that can be used?

    Bkr0963c0 pointsBadges:
  • User Id in Pgm DS in case of Scheduled Batch Job.

    Hi All. An user's id can be retrieved inside the pgm from system Data Structure which contains the User Id invoking the pgm. Normally this is passed to a file field before writing/updating the file. If the file is updated by a Batch pgm then the Id of user submitting the job goes to the system DS...

    Dipendra0 pointsBadges:
  • Does anyone on your team have an AS400 script handy to purge out oldest members of appended files?

    Basically, I'm hoping that somebody out there might already have a script or program that they use to purge out old members that get appended to static physical files on the MC400 (HNNE). I would be much obliged if you could send me the program or provide me a tip on where I can find a good script...

    GottaggedsoamnowIT0 pointsBadges:
  • Triggers

    Does the AS/400 have a cross-reference file or files that give the same kind of information about triggers as QADBFDEP and QADBFCST do for dependent files and constraints? If so, what is/are they called? Thanks

    Xixones0 pointsBadges:
  • Delect members by age using CL

    I download a bank file once a day. I want to keep the last two weeks of files stored in members of file ARCHIVE. Typical member names might be 20041109, etc. How can I purge the members that are more than 15 days old using CL? Is there a way to convert a *CHAR variable into a *DEC variable? Is...

    DavidG19630 pointsBadges:
  • iSeries performance question

    Hello everybody, I'm trying to figure out the best way to count the number of records matching specified criteria in large PF. (The file has over 50 million records currently and with some purging we hope to bring it down to around 20 mil.) Anyway, I created the (SQL) view: create view largePF99 (...

    Dushan0 pointsBadges:
  • New to AS400 administration and need some help.

    I have two questions here if someone can help. I will appreciate anything you can give. First, I am trying to configure a network printer on the AS400. I did wrkcfgsts, work with description, and copied the printer devices description and modified the printer device with the new info. All I changed...

    Bkr0963c0 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following