• How do I test if a port is open on a remote system?

    A while back, I used telnet to check if a port on my remote post was open. But at my new job, the systems don't have telnet installed / all outbound connections to host are blocked. Does anyone know of a way to see if a port is open on a remote system? I'm using Linux. Thank you.

    ITKE372,130 pointsBadges:
  • Telnet / SSH to embedded Linux based NAS

    Hello guys, Would someone know if there's a way to telnet or SSH to LG N1A1DD1 NAS? It has a ton of features that we need but we're not sure if it's possible. If not, can we configure it via its web interface a script that can back up via its USB port. Thank you.

    ITKE372,130 pointsBadges:
  • About TN5250 code page

    May I add code page 937 for settings? Thanks!

    crazyant5 pointsBadges:
  • Problem with Client Access emulation with a telnet connection

    I try to connect from remote pc to i-series with client access, but it give me a cwbco1003 and a cwbco1048 error, but when i try to connect with tn5250j emulation all things go well why ? I need use the client access, thanks for help.Ps. that is the trace of the problem....

    Peppelan5 pointsBadges:
  • Tacacs and authentication on Cisco routers

    We have ACS 3.X server for tacacs + and radius authentication in our LAN switches. Right now I'm able to login through tacacs+ only. I want to enable tacacs+ as well as local telnet login. This will help me to login in switches if the tacacs will fail.

    Ekansh400 pointsBadges:
  • Telnet User Exit Program

    Hello everyone, Does anyone know how to prevent a Telnet User Exit Program from affecting Client Access. I am able to block a user from getting in thru telnet xxx.xx.xxxx from the PC side. Yet, this same exit program also blocks a person from using client access, which I can not have. I don't...

    Piano520 pointsBadges:
  • Telnet and FTP transmit data and passwords over the network in plain text iSeries access for Windows

    Hi, iSeries Access for Windows using TCP/IP connectivity applications such as telnet and FTP transmit data and passwords over the network in plain text. This means that the data and passwords can be intercepted and read by other users on the network. Looking for solution to solve this problem....

    abiha6325110 pointsBadges:
  • Unable to connect to Exchange with POP3 and IMAP4

    Hi, I am unable to access my exchange account with POP3 and IMAP4 setting. I have tried various option but fail to do so, i can able to telnet port 110 and 143. I'm also having TMG and firewall, is firewall restricting the access? If yes can anyone please tell me how to modify setting in TMG server...

    Redhot2006360 pointsBadges:
  • Telnet CL program on AS/400

    Does anyone know if it is possible to write a CL or RPG program that will automate a telnet session to a second device to change data? I have a multiple fuel controllers that I need to telnet into daily and change the current fuel price. I would like to automate this. Does any onw know how to do it...

    wkozerski20 pointsBadges:
  • I can connect locally to iSeries via telnet

    I can connect locally using telnet, but cannot do it from the outside world. Any pointers out there would be appreciated. Thanks, Bob

    BobPhoenix25 pointsBadges:
  • Best tool to view HTTP response headers

    Does anybody know of the best way to actually view HTTP response headers from a request against a particular URL? Would Telnet be the best option? Is there another command / tool that's better?

    ITKE372,130 pointsBadges:
  • Telnet connection lost

    We have a PC that has it's telnet connection closed and reopened every few minutes regardless of open files and interactive jobs running - IBM states it may be a service - but same thing happens when PC is booted in safe mode with networking, killed all non essential services we could find - still...

    Jpolep5 pointsBadges:
  • User Exit Program for TELNET

    Does anyone know if a User Exit Program exists out there for TELNET application? I developed one for FTP, but was unaware that TELNET did not fall under this application. Also, aside from TELNET, and FTP, are there other ways that people can get into the AS/400 that I need to develop exit programs...

    Piano520 pointsBadges:
  • Automate telnet session

    I am having access to POP SMTP and IMAP server. I need to give some set of commands every hour starting telnet session. Please let me know is there any way out to group all the commands in a script and run only that script which will perform all the desired result. I am using windows XP as...

    Ashubkulkarni15 pointsBadges:
  • How can I take log file from Command Prompt

    Hi, I need to telnet an application and I have to take the logs from that. Please help me. Thank you.

    Anekud15 pointsBadges:
  • Cisco Switch 3560 assigning IP address manually

    I have a Cisco 3560 Switch. How should I define the IP address and subnet mast through telnet? I cannot access express set up mode. I want to assign the IP address and subnet mask manually through telnet. Please help me. Thanks!

    Rabbanimd5 pointsBadges:
  • FTP User Exit Programs, TELNET and Security

    In addition to FTP Exit Programs, I have some additional questions that I was hoping someone could help me out with. They are as follows: When this client is logged onto our AS400 (server) from a pc, he (she) will be limited to the following FTP commands; namely, sending files (PUT), and setting...

    Piano520 pointsBadges:
  • Exit program restricting Telnet on port 23

    Hi all, I need a way of allowing only certain IP addresses the ability to telnet to our system on port 23. This would be until the time that they can upgrade their client. So as an example, we need an exit program to do the following: * Allow 124.4.* to telnet into our system via port 23. * Deny...

    Bggas400160 pointsBadges:
  • Any problems with connecting 400+ telnet 5250 sessions through a WAN to a central server?

    I am researching a project that would require 400+ IBM 5250 telnet sessions to connect back to a central AS400 server than an MPLS WAN. Does anyone see any routing / general issues with having this many connection ultimately coming back through 1 router at the host? How much bandwidth will each...

    Genxsherpa15 pointsBadges:
  • Client Access Timeout Error CWBC01048

    We have installed the IBM Client access v5r3 software. When we connect to AS400 server using Client Access we are getting a time out error (CWBC01048). We were able to connect to the server using TELNET and also ping to the server.

    Ben Rubenstein9,965 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.