• QSECOFR user profile is not allowed in TCP/IP socket mode!

    I am getting an error message when I try to connect to the i5 with a Windows based query application. QSECOFR user profile is not allowed in TCP/IP socket mode! I read a couple of articles, it might has something to do with an FTP restriction on i5 side. Could anyone point me to right direction? I...

    Chabsta85 pointsBadges:
  • TCPIP stack error in lotus notes

    I am getting TCP IP stack ran out of memory msg while accessing emails in Lotus notes. Then I need to restart the system bcoz, i cannot proceed on with lotus notes. Pls advice. thks.

    LARISSA5 pointsBadges:
  • Has anyone connected HP Laserjet 2035n to iSeries via TCP/IP?

    Dozens of HP Laserjet printer are attached to our iSeries via TCP/IP. A few days ago we attached a new HP Laserjet 2035n using the same technique we've used many times in the past. It is giving us fits. After printine the first print job it hangs up for approximately five minutes, then prints some...

    WoodEngineer6,955 pointsBadges:
  • when receiver send ACK for multiple packets?

    I studied tcp sliding window. From there, sender can send several packets without receive ACK from sender based on window size. But in captured packet, receiver send ACK after received two or three packets from server. Why it works like this? window size is enough to get more packets.

    ITKE366,930 pointsBadges:
  • The TCP/IP protocol stack that ran out of memory, whay it occurs, how to over come this error in lotus 6.5.4 march 2005

    we use lotus 6.5.4 and the above problem arises after running lotus half and hour

    ar348315 pointsBadges:
  • Which two layers of the OSI model have the same functions as the TCP/IP model Network Access Layer

    Which two layers of the OSI model have the same functions as the TCP/IP model Network Access Layer

    Diljith5 pointsBadges:
  • TCP/IP Error 3448

    What does error code 3448 in connection with TCP/IP connection mean

    Daks190 pointsBadges:
  • eCS and OS/2 AS/400 connectivity/communications

    Has anyone had any experience wtih OS/2 and OS/2 Warp communications on the AS/400. It is licensed installed software on my company's AS/400. I'm wondering if it is native communications between the 2 OSes and hardware, or if Client Access and/or TCP/IP is required. eCS (ecomstation, took over...

    Gmil494365 pointsBadges:
  • How to configure TCP/IP for AS/400

    I am having one static IP address and I have opened the ports for the http connection. Now I want to configiure the IP to the AS/400. Please say the step by step process to configure the IP to the AS/400. Does I need any special thing to configure the remote telnet connection. How can I able to...

    Naveens140 pointsBadges:
  • DNS issue within the local network

    Dear members of this site, I am presently doing CCNA and took some exams of MCSE 2003 track. I have a very important question to ask, it is actually regarding a DNS issue within the local network. If there are 2 Computers (ComputerA and Computer B) both are connected to a switch making a local...

    Fahad135 pointsBadges:
  • Imagistics 3512 DEVD iSeries Printer problem CPF3397

    Hi I'm having trouble with a few Imagistics 3512 printers connected to a I series via IP The printers are in the US and the I series is in the UK They print correctly but are plagued with the printer ending abormaly. These then have to be restarted over and over again!! Does any body have a working...

    Mell0rman270 pointsBadges:
  • Opening and closing TCP/IP ports on an i-Series

    Hi, I have been asked to create something to open and close TCP/IP ports on an i-Series. Has anybody had any experience with something like this? The idea is that a server will constantly poll a specific port on the i-series to see whether it is available or not and we need to be able to control...

    Gilly40023,730 pointsBadges:
  • Keeping the settings from a Print Server, spooling on the client via TCP/IP port

    Hi all, We would like to set up WinXP clients on remote sites so that they receive printer drivers and settings from a centralised (off site) Windows Server, but then when they print will spool from the client directly to the printer through a TCP/IP port. Does anyone know: 1) If this is possible...

    Huangdi15 pointsBadges:
  • VPN setup

    i have a planet vpn router/firewall already configured to allow pptp protocol on port 1723, no polocies-pass thru mode. on my windows server 2003(small business pack) i have enabled two ports for pptp on routing and remote configurations. and also a mobile account for my remote user. vpn from...

    92220990 pointsBadges:
  • TCP Retransmissions b/c of Checksum Incorrect

    We have a problem where some users will complain of slow application response time (on the LAN) from our ERP server, but others will be fine. After many hours of troublshooting I've discovered the following: - Packet Sniff's of affected users shows TCP Retransmissions because the Checksum is...

    Tbitner510 pointsBadges:
  • Intel ISCSI Remote Boot error message TCP/IP

    Using Windows Server 2003 and get this error when using Intel ISCSI remote boot "ERROR: Could not establish TCP/IP connection with iSCSI target system." Using Pro/1000 server adapters and Dell Poweredge 2900 server

    ITKE366,930 pointsBadges:
  • Full description of all the TCP/IP servers

    Hi folks, does anyone know where I can find a full description of what each of the TCP servers does? We recently had a problem and I was unable to find out which servers should/shouldn't be running. Many thanks

    Gross140 pointsBadges:
  • Configuring SMTP server to a external domain

    Hi friends, I have a AS/400 configured to send mails by the service SMTP I can send a mail to guest@mycia.com.br but I cannot send a mail to guest@yahoo.com.br, how can I configure this server ?. Change TCP/IP Domain (CHGTCPDMN) Type choices, press Enter. Host name . . . . . . . . . . . 'AS40025'...

    RBDSILVA550 pointsBadges:
  • To understand the TCP/IP model?

    Hello.I need some advice as regards understanding the TCP/IP model. I understand the OSI model pretty well and need to find out how to go about getting a good understanding of the TCP/IP model. Can anyone help? Regards.

    Rahul Shrivastava330 pointsBadges:
  • Adding a hold queue and a print queue in XP

    How to add a hold queue and a print queue in XP. I've done this by configuring the LPR port in the port properties of the print queue. But for some strange reason I can't remember the stesps now.

    Lotus555 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following