• Question on changing status of iSeries IP address

         How do you change the status of IP address in iSeries from ACTIVE to INACTIVE after performing IPL? I need to know the procedure on doing this because In our scheduled DRP testing activity, there's a part in that activity where i have to configure an existing Production IP address for...

    danmd5systemad370 pointsBadges:
  • Various Ethline failures

    We have moved 15 of 20 AS400 / iSeries to a new business DMZ.  The five systems that fail range from OS level V4R5M0 to V5R4M0 and system types 50S to 520.  Some failed systems are LPARs where half the systems of the LPAR are functioning with their new IPs while the other half fail.  The failed...

    Wwillett45 pointsBadges:
  • Device setup with static tcp address

    How do I add a static IP address to a device on AS400? I have just been handed this problem and have never dealt with device communications. The device is a handheld PC connecting through 5251 telnet (static address) from a remote location through a communications link.

    Ace910 pointsBadges:
  • Connecting a machine to all systems in datacenter over TCP/IP

    We want to connect one keyboard, mouse and monitor to all systems in our datacenter. We want to do this over tcp/ip and not run a lot of cables. What equipment will facilitate this?

    NewnanIT1,110 pointsBadges:
  • Why laptop window 7 common issues failing to connect internet?

    Can someone tell me why new Compaq/Toshiba laptop window 7 failing to connect internet? Have tested with other Internet Browser same fault. Fully confident not a infection related. Have tried to reset TCP/IP Winsock catalog -same fault.So far we have to install Service Pack 1 Updates to get it all...

    Rakei3,260 pointsBadges:
  • FTP Failure after particular time

    Hi, My iSeries (V5R4M0) system transfers the file to Unix server ovr SSL. It uses FTP Command ccc to set clear command channel. The problem is when we have big file and it takes more time, we get the error "No response from remote host; all connections closed." What I observed is any time data...

    sim400305 pointsBadges:
  • Subnet routing

    Will the way I setup my network and router to talk to multiple net cards on one PC from other PC on separate network work? First PC with two network cards First network card IP 192.168.3.106 Sub 255.255.255.0 Gateway 192.168.2.100  Second network card IP 192.168.5.106 Sub 255.255.255.0 Gateway...

    AllyU5 pointsBadges:
  • AS/400 STARTUP timing issues

    I've had more issues in 7.1 with timing and adding delays to insure subsystems or TCPIP are up before proceeding to the next step in the start up program. Has anyone ever used APIs to insure things are up instead of just adding larger delays, making the time till the system is available longer?

    OldSysAdmin945 pointsBadges:
  • TCP/IP limits on routers/switches

    Does anyone know if there are limits using a router/switch or separate routers and switches for the number of users online (not twinax local terminals but remote terminals) concurrently? I know multiplexers on mainframes would allow modems to allow many terminals at one time...and the terminalID...

    Gmil494365 pointsBadges:
  • ISP has assigned a static IP, How to set up netgear router

    I have a server with a static IP assigned by my ISP. I want to add another computer so I installed a netgear router and configured it with the static IP address etc. that the ISP gave me. When I did that the original server would not connect to the internet, but the new PC did. I then changed the...

    DSguy5 pointsBadges:
  • Computer network subnetting

    I want to connect 125 computers in a network to the internet, I only have 4 public IP addresses. the computers are in the range of 172.16.1.1/16 through 172.16.1.125/16. What else do I need to allow these computers to access the internet?

    Melyndalea5 pointsBadges:
  • Telnet problem on SCO Unix 5.05

    hi.i have a problem with my pentium 4 computer with sco unix 5.0.4 operation system to server computer or another computer (pentium 1) .the network is tcp-ip.eather i can not ping to server or other client.if you help me i been grateful of you.

    Mostafanabavi20 pointsBadges:
  • Windows Server 2003 Strange DNS issues

    I have taken over an AD/DNS install (was not employeed when it was initially set up) and I am seeing things I think are strange to say the least. for example, if my FQDN was example.com - this is a typical nslookup/ping session:   C:>nslookup Default Server:  w2003server.example.com Address: ...

    DAXQ160 pointsBadges:
  • TZ 100 Hang, ping with no response and vpn drop and reconnect

    TZ 100 is keep working but there is no response through http management. Firmware 5521 and 5520 have used but no improvemenet. VPN drops and reconnect all the times. I have adjusted the TCP/IP timeout to 60 Seconds. Unfortunately, it is useless.

    Atracc5 pointsBadges:
  • Using STRPCCMD on clients using BosaNova TCP/IP emulation

    Is there a parameter on BosaNova TCP/IP configuration to allow/disallow Remote commands? Using BosaNova emulation, when I give STRPCO followed by STRPCCMD (with PAUSE(*YES))from command line, I go right back to command line. Using Client Access, the command is executed, or atleast I get a window...

    Tanayg10 pointsBadges:
  • LPR Printer IP settings lost

    i have a number of printers that do not work through standard TCPip port on my Windows 2003 server, but some dont, if i connect them through LPR port they work but problem i am having is that each time my server is restarted or the network goes down i loose the LPR IP settings and i have to redo...

    Danies5 pointsBadges:
  • Wireless Network Bypassing

    hi i have one wireless Linksys usb network adaptor , i connect it to my Laptop after getting signal internet start normally .know question is that i want to use my laptop as a wireless repeater .( like attach one router to laptop and getting signal in my place) actually in my room there is very...

    Danial370 pointsBadges:
  • SIgnon to a different AS400 via menu

    HOw to I allow a user to signon and than select from a menu to signon to a different AS/400.

    Sinajana5 pointsBadges:
  • The TCP/IP protocol stack that ran out of memory, whay it occurs, how to over come this error in lotus

    The TCP/IP protocol satck that ran out of memory, why it occurs, how to over come this error in lotus

    ar348315 pointsBadges:
  • TCP/IP properties

    tell me about IP address, Subnet mask, Default geteway, preferred DNS server, Alternate DNS server

    Biknet5 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following