1
  • What PCI Card is needed for 9406-825 machine?

    Hi everyone, may I just ask what PCI card needed in 9406-825 machine when I want to connect a 3592 Tape drive? Also what fibre cable I can use? Thanks.

    excellentrandy1,160 pointsBadges:
  • Resume system save on second tape?

    We have a 9407-515 V6R1M1, SLR60 Tape drive. We used to be able to do an entire system backup (unattended) on an SLR60 tape. It now wants a second tape. After inserting the second tape how do I get it to resume the save? It just sits there like it wants a message answered but I can't get to any...

    Jrb791125 pointsBadges:
  • Adding system units tape drive to the encryption configuration

    An idea how to add the system units tape drive to the encryption configuration. We have TS3200 tape library with 4 drives and encryption status is ON.

    Mani1017130 pointsBadges:
  • tape drive utilization

    How do I move a tape drive between 2 LPAR's without having to do it manually?

    jmurfitt40 pointsBadges:
  • Interface error: Tape unit TAP01 (resource TAP02) or IOP CMB03

    Already change Cable, and entire Tape Drive, still cannot solve. Any idea? Below is the JOB LOG Message . . . . : 928 - SAVLIB LIB(JMMENV B82DYO BP64MDTA BP64DW SRCLIB TESTRST) DEV(TAP01) VOL(DLY000) SEQNBR(1) ENDOPT(*LEAVE) CLEAR(*REPLACE) SAVACT(*LIB) ACCPTH(*NO) DTACPR(*NO) OUTPUT(*PRINT)...

    ChinChin5 pointsBadges:
  • AS/400 Tape Device is not avilable

    Our tape drive has been issuing error messages. Last week it required cleaning and we found one new tape to be defective. Today's error indicates t he tape drive is not available because another task is using the tape drive. This is not the case, any fixes out there?

    Mapics60 pointsBadges:
  • Trouble getting LTO2 tape drive to compress backups on Backup Exec 2010

    I am using Backup exec 2010 and I can not get my LTO2 tape drive to compress backups. The tapes and drive support 200/400 compressed but I can only store up to 200GB max.

    NewnanIT1,110 pointsBadges:
  • View Files on Tape Backup

    How can I view the files on the back up tape itself and not the log? I need to verify which tape has the most recent files on it, out of several monthly tapes.

    Cooper201015 pointsBadges:
  • Disabled DST password oncomplete system restore

    I have posted this question as part of an old discussion but have not seen an answer so please forgive the second posting but I can really use some help on this one. I am doing a complete restore to a I515 backup system which is identical to our main system. After finishing research I have...

    JaneS485 pointsBadges:
  • LTO3 tape drive issue after cleaning

    After cleaning my LTO3 tape drive with a cleaning tape it will not recognize my old tapes., It seems to write to new ones without an issue but the old ones with data are showing up as UNKNOWN.

    JimmyIT1,725 pointsBadges:
  • Tape drive showing Interface error

    Hi. . . I have this tape drive attached to an EKM server for encryption is showing this error everytime I do a DUPTAP Message . . . . : Condition of source/sink object TAP05 not valid. Cause . . . . . : The condition of the source/sink object is not valid. The affected operation value is X'4001'...

    Jerico125 pointsBadges:
  • configuration of hp ultrium 1760 sas external tape drive

    we have dell server and hp ultrium 1760 sas external tape drive but i am unable to configure in LAN. so plz help me how to configure it in my lan

    Leeza1235 pointsBadges:
  • Backup Exec 12 Ultrium LTO 3

    Because of too much information, my LTO drive has been spanning tapes. Last night it couldn't span because the next tape was not in the same media set. I was asked to insert a tape, but I couldnt' insert a tape because the drive was locked. Couldn't unlock the drive because a job was running?! Help

    Sulser5 pointsBadges:
  • how to manually unload ExaByte Magnum 1X7 LTO tape drive

    how to manually unload ExaByte Magnum 1X7 LTO tape drive

    ITKE344,730 pointsBadges:
  • DSPTAP DEV(TAP01) OUTPUT(*PRINT)

    DSPTAP DEV(TAP01) OUTPUT(*PRINT) I would like to know total size of my Tape , but with this command it is not displaying . I would like to know what r the Object r stored . I would like to know what is the remaining space available to store . I would like to know what r the object r there in the...

    Chrisjam95 pointsBadges:
  • Mount command for backup

    Is there a command to permanently mount a backup tape on tape drvie for recovery of data.

    Umakanth20 pointsBadges:
1

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following