1
  • What formula do I use to calculate file transfers across a T1?

    I have a site that is 70ms away. What formula do I use to calculate throughput for different file sizes? Thanks!

    Rvp5 pointsBadges:
  • What are input errors, CRC, frame and drops?

    Can someone briefly explain about input errors, CRC, frame, and drops?

    Prabhu22.v5 pointsBadges:
  • T1 connection into the office

    I have a T1 coming into our office. We have about eight machines to connect to it. What is the best hardware to purchase to get the most bandwidth to the machines?

    Kellermajk0 pointsBadges:
  • ISP’s over leasing lines.

    Is there a way to tell if my ISP provider is leasing out T1 to other companies?

    Tredzensky5 pointsBadges:
  • Engineering a Backup Solution?

    *** Fairly long *** I work for a hosting company and we set tunnels up for our clients. The client connects to us, and we host AD and Exchange for them, among other things. I have one client that has about 5 locations. Four of the locations are on a metro ethernet connection to their corporate...

    John.blakley5 pointsBadges:
  • 2 Bonded T1’s

    We have two bonded T1's but are having some issues. Since these are bonded if they take down one T1/circuit should our whole internet phone sys go down or should it just work with the reduction to one T1.

    crfuchs5 pointsBadges:
  • How do I bond 2 T1 together usinig a Cisco 2811?

    How do I bond 2 T1 together usinig a Cisco 2811?

    Rjratcli5 pointsBadges:
  • How to divide a T1 line?

    How can I divide a T1 line between about 20 clients; ensuring that they each get the same amount of bandwidth? The T1 connects to a Linksys router (WRT160NL) which is connected to a wireless Linksys router (WRT160N). I want to use two or three of these wireless routers; which they would be in...

    Kavoos15 pointsBadges:
  • How to Reconfigure LAN After Move from DSL to T1

    Our 2003 installed network uses DSL since 2003. We have several IP in use for different servers running in our network since 2003. Now this ISP upgrades us to T1. A new T1 modem is installed, with a new set of IP, Subnet, Gateway, DNS 1 & 2 data for T1. We are told that we have to reconfigure...

    Beston225 pointsBadges:
  • Implementing a Failover

    We currently have an SDSL which we would like to use as a failover once we get our T-1 line. The modem which is currently being used for this sdsl is a NETOPIA. There is another modem which is a dedicated PRI T1 for voice but is currently not providing data. It it connected to a modem with ports...

    Jsuarez145 pointsBadges:
  • t1

    What is a t1

    Purpose10 pointsBadges:
  • Ping of Death

    Hi, I have a remote office connected over a T1 line to the main office with Cisco routers. The problem is that I get tons of logs in our main firewall that connects to the outside world saying "Ping of Death Blocked" The source of the attack is always an IP address(not always the same) from the...

    Alan Dala30 pointsBadges:
  • Two Internet Connections, One server

    OK, I'm very, very new to networking. Please be kind. I work for a small company. We have a server running Lotus Notes that is accessed both by people inside our LAN and about 50 employees that connect over the internet. Our internet connection is a simple DSL. We recently installed a hi-tech phone...

    JMackey20 pointsBadges:
  • T1/fractional T1 provider

    Comcast is driving me crazy. There are so many problems with the service, I can barely keep up with them. Does anyone know of a good/cheap T1/fractional T1 provider in the area? I figure I could bring my colo machines home, save that money, get rid of my comcast internet bill, and maybe host some...

    Chunter110 pointsBadges:
  • T1 full duplx circuit

    On a full duplex T1 circuit how fast can you go at the same time in both directions? Is it 1,544meg in both directions at the same time or 768k at the same time at the same time/ Thanks Jim.

    Jim505 pointsBadges:
  • How many channels per T1, in a 2xT1 bundled, would throttle the speed to 2MBPS

    How many channels per T1, in a 2xT1 bundled, would throttle the speed to 2MBPS ? What is a “CO”?

    BIGBOY7115 pointsBadges:
1

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following