System Properties mis-reporting used disk space?
I am using Windows Vista (32-bit) on my computer. Lately, I have noticed that the reported "used space" on my hard drive (via right-click/properties) keeps rising dramatically while I add very little to my computer. I then made sure that I had turned on options to show system files and hidden OS...
View Answer
| Jul 4 2008 4:31 AM GMT
| asked by
Rayhorn13
Vista, System monitoring, Hard drives
STRSST User ID Disabled.
How do you re-enable the user id for STRSST when it has been disabled?
View Answer
| Aug 1 2005 8:42 AM GMT
| asked by
bkr0963c
OS/400, iSeries, i5
STRDSKRGZ, TRCASPBAL, and STRASPBAL commands.
Are any of you familiar with using these commands, the amount of time it takes to perform these commands, the requirements (restricted system or not, etc.), or where I can obtain some documentation on these commands so I can read up on them? I appreciate the info and help.
View Answer
| Jul 19 2005 9:17 AM GMT
| asked by
bkr0963c
OS/400, iSeries, i5
File transfer to the iSeries problem.
I am trying to transfer an excel speadsheet file to my AS/400. I have tried setting up a file transfer through client access and tried sending the file directly from Excel. Both times I get the following errorcwbtf0023 - pc file description file was not specified or is emptyThe file is not empty....
View Answer
| Jul 13 2005 10:11 AM GMT
| asked by
bkr0963c
AS/400, OS/400, iSeries
Is *JOBCTL needed to view job logs?
I have read IBM's Security manual and Work Management manual and I know that *JOBCTL is needed to change job priorities and other things for jobs on the system, but I do not see any statements that say *JOBCTL is needed to view the job logs of other user's jobs on the system. Does anyone know if...
View Answer
| Jul 11 2005 2:09 PM GMT
| asked by
bkr0963c
OS/400, iSeries, i5
Receiving journal entries
Hi, I am new to AS400, so need some help in solving a problem. I have tried to some extent but things seem to be more complicated than I thought.Problem Goal: receiving entries from a journal and putting them into a DB2 table in a predefined format(say Type5).RCVJRNE command can be used to specify...
View Answer
| Jun 22 2005 5:55 AM GMT
| asked by
pprasad123
OS/400, iSeries, i5
Too high % temp. addr. in WRKSYSSTS - AS/400 aka iSeries
In WRKSYSSTS the temp. addr. is too high and not getting lower after IPL.% perm addresses . . . . : 0,128% temp addresses . . . . : 10,453Can anybody tell me how to get this % lower?thnx Rita
View Answer
| Jun 9 2005 6:56 AM GMT
| asked by
ritakrop
OS/400, iSeries, i5
Can you transfer active jobs to another subsystem?
If a job is already active in one subsystem, can you use tfrbchjob or tfrjob to move into a different job queue to run in a different subsystem, or will you get errors because the job is already active in one subsystem?
View Answer
| Jun 8 2005 4:52 PM GMT
| asked by
bkr0963c
OS/400, iSeries, i5
Damaged File In Save Operations
I have a file that is damaged, therefore, it will not save during my nightly backups. The file is QASZRAIRD in library QUSRSYS. Does anyone know what this file is used for or how I can find out what this file is used for? Can I delete the file and re-create the file, or will that cause more of a...
View Answer
| Jun 6 2005 3:24 PM GMT
| asked by
bkr0963c
OS/400, iSeries, i5
iseries system management monitor
Hi,I'm looking for a iseries system management monitor tool. I found one at www.tango04.com, Visual Message Center, but my question is; are there other alternatives available? These monitors can run on Windows or Linux platform, a gui would be nice.
View Answer
| Jun 6 2005 8:43 AM GMT
| asked by
RainbowSolutions
AS/400, Hardware, OS/400
Installing PTFs questions and concerns.
I am now responsible for installing PTFs on the as400. I will be performing my first install on June 25th. I have some questions if someone doesn't mind helping?1. Documentation says to check the CD to make sure that it works. I put the CD in my CD drive at my local PC and browsed through the...
View Answer
| May 25 2005 9:42 AM GMT
| asked by
bkr0963c
OS/400, iSeries, i5
reusedlt *yes
Hi, Has reusedlt *yes behavior changed with V5R3?When I add a record to a PF that is reusedlt *yes in V5R2 is uses a record that has been deleted, however when i do the same thing on a V5R3 system it adds a new record rather than re-use one.Anyone run into this before?Thanks, Luis
View Answer
| May 23 2005 2:52 PM GMT
| asked by
xixones
Data center operations, Disaster Recovery, Security management
Need some performance tuning tips or suggestions.
We currently have a 720-9406 model iSeries AS/400 system. We recently upgraded are OS to version V5R3M0. We are using the system mainly for our payroll processing which occurs weekly, as well as we have the system set up as a web server which we have employees accessing throughout the day. Since...
View Answer
| May 20 2005 9:46 AM GMT
| asked by
bkr0963c
Web services, IBM, Servers
How To Print A Hardware Configuration List?
Does anyone know of another command to use to print out a hardware configuration list for the AS/400. I have already used the following command: DSPHDWRSC TYPE(*AHW) OUTPUT(*PRINT)Is there anything else that can be used?
View Answer
| May 20 2005 9:34 AM GMT
| asked by
bkr0963c
IBM, Hardware, OS/400
Backup Schedule File on AS400
Do any of you know the name of the file that contains the backup schedule data. If you run Go Backup, Select Option 10. Set up backup, Select option 20. Change Backup Schedule a user can put in the schedule to run backups. Does anyone know what file and in what library this file resides that holds...
View Answer
| May 17 2005 5:36 PM GMT
| asked by
bkr0963c
Mainframe, Availability, Backup & recovery
New to AS400 administration and need some help.
I have two questions here if someone can help. I will appreciate anything you can give.First, I am trying to configure a network printer on the AS400. I did wrkcfgsts, work with description, and copied the printer devices description and modified the printer device with the new info. All I changed...
View Answer
| May 17 2005 12:04 AM GMT
| asked by
bkr0963c
Security management, Auditing, Tech support
User Id in Pgm DS in case of Scheduled Batch Job.
Hi All.An user's id can be retrieved inside the pgm from system Data Structure which contains the User Id invoking the pgm. Normally this is passed to a file field before writing/updating the file. If the file is updated by a Batch pgm then the Id of user submitting the job goes to the system DS...
View Answer
| Apr 15 2005 3:11 AM GMT
| asked by
Dipendra
OS/400, iSeries, i5
facing problem with shared printer
GoodDay, Dear all, this is giri.We have got NT server in our office.1 since I found some bad sectors in one of my client system which was having windows98 operating system. I replaced with new 80gb seagate harddisk (7200rpm).I tried installing 98. in the bios my harddisk detected as 80gb,...
View Answer
| Mar 7 2005 1:47 AM GMT
| asked by
GiriPrasad
DataCenter, Tech support, Help Desk
How to monitor and manage lan gateway from a helius router?
Hi Everyone,I am trying to filter/manage a gateway through a helius router for directway.We are running windows 2000 server with all xp clients, around 50 of them.We have active directory running with the domain controller handing out dns and dhcp to clients.All clients are pointing to the helius...
View Answer
| Jan 9 2005 3:32 AM GMT
| asked by
kimberley
Application software, Networking Products, Security
Monitor Internet Bandwidth
Good day, we are using windows2000 smallbusiness server in our organisation with Exchange,Dns and Isa server configured.1. I want to monitor the internet usage by the users.2. I want to take a report on monthly or daily basis how much mb/gb utilised By Each User.Thanks for u'r reply in advance.
View Answer
| Nov 29 2004 1:55 AM GMT
| asked by
GiriPrasad
DataCenter, Data center operations, E-business
