• Routing Public Emergency Calls Based on Cell of Origin

    Is it possible to route emergency calls based on the Cell of origin? In a private network, there is one subscriber who wants all emergency calls originating in one specific area to be routed to a special emergency desk. All other emergency calls within the network would be routed to a different...

    Amawhinn15 pointsBadges:
  • Can we change the path of data using manageable switches?

    Sir, I want to know that, can we change the path of the data sharing using manageable switches?

    abhisp37375 pointsBadges:
  • Test cases for Ethernet switches

    I'm working on a project which is on the Ethernet switch. I'm totally new to it. Could you help me with access control lists (ACL), Quality of Service (QoS), and packet filtering concepts in detail? I find it difficult writing test cases for it.

    NetworkingATE1,545 pointsBadges:
  • Vlan trunking, L3 switch + L2 switch problem

    Hi, I have now successfully got my PowerConnect 6224 configured, to host and route between 4 Vlans, I have internet access and can ping what I need to, it's all working great. The next thing on my list is configuring my L2 netgear router to work with port based Vlans, I want to connect the L2...

    Michi120 pointsBadges:
  • Cisco switch is not working

    My cisco switch is not working, When I connect the PC with any switch port, switch not show any color light, even when I on the switch, only one light show "sys". Kindly help me.

    3455 pointsBadges:
  • Limit bandwidth for all online radio/video streaming

    We recently installed a fancy new 3com switch (with QoS) in the center of a star topology of dumb switches. About the same time our internet connection was brought to a screeching halt. We figured out the online radios and video streams from you tube and others killed our T1 because of QoS. I've...

    Patzo65 pointsBadges:
  • Optimizing traffic between two Netgear GSM7328s layer 3 switches.

    We have a WAN link running 100Mbps with Netgear GSM7328s switches at each end, this carries traffic between our main site, and our DR site, which also has our primary internet link as it's located in the same hosting center as our ISP's kit. Nightly cross-site backups swamp the link, and this has...

    DPritt5 pointsBadges:
  • Layer 2/3 switches

    When I am trying to put the default gateway in layer 2 switches with IP default-gateway xxxxx command it okay. But If I'm trying to put the default-gateway in 3560(layer 3) switches with IP default-gateway xxxxxxx command its giving me error that invalid command.

    Jadu50 pointsBadges:
  • Remote Desktop Connect

    How to I setup a RDC connection for DLink switch?

    So155 pointsBadges:
  • Free Chapter – Implementing Multicast on Cisco Catalyst Switches

    Another free chapter download is available on the IT Bookworm Blog. Written by: David Barnes and Basir Sakandar Book: Cisco LAN Switching Fundamentals Overview: "Cisco LAN Switching Fundamentals provides an easy-to-understand introduction to LAN switching best practices using Cisco Catalyst...

    BrentSheets6,925 pointsBadges:
  • Connecting data closet switches to the core with redundant links

    I'm moving our flat network which covers a three-story building and about 450 users to a subnetted network. I would like to know about connecting data closet switches to the core with redundant links. Can I implement OSPF on the core and connecting switches and eliminate spanning tree? In this...

    NetworkingATE1,545 pointsBadges:
  • Setting up switches and VLANs

    I am going to an interview that requires me to set up 3 switches, VLANs and do some routing. Do you have any ideas what that might entail?

    pslang10 pointsBadges:
  • Configuring Qtrunk ports on FS728TS Switch

    I need to connect two switch FS728TS. I have 3 VLAN in each switch. How can I configure the common ports of every switch to achieve the 6 VLANs traffic flow on this link?

    Tecuntecun5 pointsBadges:
  • Cisco Switch 3560 assigning IP address manually

    I have a Cisco 3560 Switch. How should I define the IP address and subnet mast through telnet? I cannot access express set up mode. I want to assign the IP address and subnet mask manually through telnet. Please help me. Thanks!

    Rabbanimd5 pointsBadges:
  • Anyone know of a free simulator for Cisco router and switch configuration?

    Can anyone recommend or suggest a free simulator for Cisco router and switch configuration? Thank you!

    NetworkingATE1,545 pointsBadges:
  • How to install 2 virtual client with Windows 2003 Server

    Hi, I would like to know how to install 2 virtual client with Windows 2003 server? Do we need a KVM switch with additional configuration and license?

    Retrohydra5 pointsBadges:
  • 2IPS’s, 2 routers (1 router per each ISP) connected 8 workstations through 2 L1-switches – will this work?

    2 IPS's, 2 routers (1 router per each ISP, diferent LAN-subnet on each router) connected to 8 workstations (through 2 L1-switches) - will this work? (it does actually work but with disruptions)? 2 ISPs are required in case one IPS's connection is down. Thequestion is will the other ISP's connection...

    Eager2knowlan35 pointsBadges:
  • Is there any method with which one can increase the port speed or bandwidth for a particular port of a switch

    Is there any method with which one can increase the port speed or bandwidth for a particular port of a switch (2950 or 3750)?

    NetworkingATE1,545 pointsBadges:
  • Career change: programming to networking

    I'm looking to move from programming to network administration and eventually security. I need advice. I have an AA degree. I did tech support and programming part-time in college. Since then, I've spent 2.5 years as a programmer (with some IDS responsibilities), 1.5 years doing QA on niche-market...

    Unicityd30 pointsBadges:
  • Pretty strange problem in my network

    Hi Everyone, I have a client who has 10 computers . He also have 10 ADSL connections for internet connectivity (all from single ISP). We want to setup the environment in the following way: we have 2 D-Link simple switches with 24 ports. What we wanted to do is to connect all ADSL modems to one...

    Aligator0075 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following