1
  • Product Question: SLM2008: Can SLM2008T switch by powered by PoE?

    Product Question: SLM2008: Can SLM2008T switch by powered by PoE? http://www.cisco.com/en/US/products/ps11229/prod_models_comparison.html#~two Can the model SLM2008T be powered by PoE on port 1 or is this feature only available on SLM2008PT. It is not clear from the documentation or comparison...

    Wardy5 pointsBadges:
  • How do we create a network of 100 Computers in one building from scratch?

    One building, divided in 3 stories. I want to create a network of 100 computers in this one building. How many Routers, Switches and Hubs do I need? How many Straight and cross over cables do I need? and what kind of topologies to implement? Do I need a server? What protocol to implement? What i am...

    fahad8510 pointsBadges:
  • What is the use of HUB if we have the Switch?

    We all know that the switch is a more intelligent device then HUB. So what is the use of HUB now, why the manufacturers still believe in making HUB devices?

    STudentoftheyear201220 pointsBadges:
  • Avaya IP Office

    I have a layer 3 3560X switch where the Avaya IP Office and the Avaya VoIP phones are connected to. I am trying to have the connection between the Avaya IP Office and the Exchange server so that the voicemail can be sent to the users mailbox. My switch is configured with voice vlan for the pbx and...

    jaci0i5 pointsBadges:
  • How to Configure Tp-Link Switch TL-SL2452WEB

    i have tp-link web switch tl-sl2453web when i on dhcp i can't access switch please help thanks.

    Tumjee5 pointsBadges:
  • Intervlan connectivity

    Hi All, I'm looking for solution/help to solve this issue. Scenario: Two vlans (Data & Voice) are created in my switch (3560). I 've voice router (2900 series) & braodband gateway which connects to the service provider. [strong]Note: Two vlans are connected to two different interfaces of a router...

    RGPrakash170 pointsBadges:
  • How can I configure routing between two VLANs on different switches?

    We have one C3560 switch, on which we have configured two VLANs. VLAN 1 is 10.1.1.x and VLAN 2 is 10.1.30.x; the subnet mask for both is 255.255.255.0. We want to configure routing between these two VLANs. How can I do this? Please note that these two VLANs are on the same switch.

    NetworkingATE1,545 pointsBadges:
  • What type of swtich should I use?

    Hi Folks, I am not a Networking expert and I have been assigned to setup a system at work for other purposes which will require networking components. I have a 3 Hosts and each host will be connected to 7 target clients. These clients will always be changing hence I can't use their MAC addresses....

    NTnewbie40 pointsBadges:
  • Do I need to use QoS for full and half-duplex network configurations?

    I have a simple switched network containing only Layer 2. The switch is a good commercial product. I use only 8 ports. The traffic offered is 4 Mbps for VoIP while all other data gets 1 Mbps (with some control traffic).[o:p][/o:p] [o:p] [/o:p] Out of these two configs,  100BASE-TX (full) or...

    NetworkingATE1,545 pointsBadges:
1

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following