CCNA Question
This is confusing to me unless I am not seeing the bigger picture. It says configure the router Ip addresses on the E0 and S0 interfaces so that the E0 receives the 11th usable subnet while the S0 receives the 4th usable subnet from the network 192.168.191.0/28. Both interfaces should receive the last available Ip [...]
Answer Question
| May 21, 2013 12:11 PM
IP Addresses, Subnet, Subnetting
This is confusing to me unless I am not seeing the bigger picture. It says configure the router Ip addresses on the E0 and S0 interfaces so that the E0 receives the 11th usable subnet while the S0 receives the 4th usable subnet from the network 192.168.191.0/28. Both interfaces should receive the last available Ip [...]
Answer Question
| May 21, 2013 12:11 PM
IP Addresses, Subnet, Subnetting
CCNA Question
This is confusing to me unless I am not seeing the bigger picture. It says configure the router Ip addresses on the E0 and S0 interfaces so that the E0 receives the 11th usable subnet while the S0 receives the 4th usable subnet from the network 192.168.191.0/28. Both interfaces should receive the last available Ip [...]
Answer Question
| May 20, 2013 6:38 PM
CCNA, IP Addresses, Subnet, Subnets problem, Subnetting
This is confusing to me unless I am not seeing the bigger picture. It says configure the router Ip addresses on the E0 and S0 interfaces so that the E0 receives the 11th usable subnet while the S0 receives the 4th usable subnet from the network 192.168.191.0/28. Both interfaces should receive the last available Ip [...]
Answer Question
| May 20, 2013 6:38 PM
CCNA, IP Addresses, Subnet, Subnets problem, Subnetting
Subnetting
Given an IP address range, select the correct subnet mask for the scenario. IP address: 200.4.82.0/24 You need to create 6 networks with a minimum of 28 hosts per network. What is the correct subnet mask and the 3rd subnet range?
Answer Question
| November 2, 2012 7:58 PM
Subnetting
Given an IP address range, select the correct subnet mask for the scenario. IP address: 200.4.82.0/24 You need to create 6 networks with a minimum of 28 hosts per network. What is the correct subnet mask and the 3rd subnet range?
Answer Question
| November 2, 2012 7:58 PM
Subnetting
Subnetting processes
Hi,guys one basic question.I am feeling so shy to ask this question.Can you please tell the procedure of whole sub-netting process.I know but i forgotten.with 2/3 examples.please dont mind.
Answer Question
| March 28, 2011 6:24 AM
Subnet Setup, Subnets, Subnetting
Hi,guys one basic question.I am feeling so shy to ask this question.Can you please tell the procedure of whole sub-netting process.I know but i forgotten.with 2/3 examples.please dont mind.
Answer Question
| March 28, 2011 6:24 AM
Subnet Setup, Subnets, Subnetting
Problem with NAT
Hi All. I have a Netgear WGR164v9 wireless router connected to internet directly by public IP and this router performing DHCP for wireless LAN ip subnet is 192.168.1.x. A server (DNS,DHCP & RRAS with NAT) connected with this router by ip 192.168.1.6 which has another subnet 192.168.10.x for LAN PCs. In this situation everything is [...]
Answer Question
| January 24, 2011 7:54 AM
Alternating Record Formats, Netgear, Netgear router, Router IP address, Subnets problem, Subnetting
Hi All. I have a Netgear WGR164v9 wireless router connected to internet directly by public IP and this router performing DHCP for wireless LAN ip subnet is 192.168.1.x. A server (DNS,DHCP & RRAS with NAT) connected with this router by ip 192.168.1.6 which has another subnet 192.168.10.x for LAN PCs. In this situation everything is [...]
Answer Question
| January 24, 2011 7:54 AM
Alternating Record Formats, Netgear, Netgear router, Router IP address, Subnets problem, Subnetting
Segmenting a piece of our Windows network
How can we segment a piece of our Windows network so users from the same subnet can not access it but people on that side of the network and a different subnet can. Currently they can communicate freely between each other.
Answer Question
| February 9, 2011 5:18 PM
Network Access Policy, Network management, Network security, Subnet, Subnetting, Windows Network Administration, Windows networking
How can we segment a piece of our Windows network so users from the same subnet can not access it but people on that side of the network and a different subnet can. Currently they can communicate freely between each other.
Answer Question
| February 9, 2011 5:18 PM
Network Access Policy, Network management, Network security, Subnet, Subnetting, Windows Network Administration, Windows networking
How can i supply a subnet address from a DHCP server on a 172.16.x.x
How can i supply a subnet address from a DHCP server on a 172.16.x.x with a 172.17.x.x through a secondry DHCP Server?
Answer Question
| April 26, 2010 2:19 PM
DHCP Relay Agent, DHCP scope, DHCP server, Subnetting
How can i supply a subnet address from a DHCP server on a 172.16.x.x with a 172.17.x.x through a secondry DHCP Server?
Answer Question
| April 26, 2010 2:19 PM
DHCP Relay Agent, DHCP scope, DHCP server, Subnetting
routing between subnets.
I have a machine with two eth cards. one is 192.168.1.254, the other 0.254. my gw is 192.168.1.1. I was to make the default gw for my 0/x (eth0) network the 192.168.1.254 (eth1) network. Can this be done?
Answer Question
| April 20, 2010 6:32 PM
Default gateway, Ethernet, Routers, Subnetting
I have a machine with two eth cards. one is 192.168.1.254, the other 0.254. my gw is 192.168.1.1. I was to make the default gw for my 0/x (eth0) network the 192.168.1.254 (eth1) network. Can this be done?
Answer Question
| April 20, 2010 6:32 PM
Default gateway, Ethernet, Routers, Subnetting
Subnetting in a 6-floor building: Expert advice?
The company I work for is expanding and as such has just purchased a new building and we will be moving staff and resources over there as well as keep the current premises. As it’s better to get the advice of others who have been through similar experiences rather than to learn the hard way, [...]
Answer Question
| April 13, 2010 3:18 PM
Network design, Networking in 2010, Subnet Setup, Subnetting
The company I work for is expanding and as such has just purchased a new building and we will be moving staff and resources over there as well as keep the current premises. As it’s better to get the advice of others who have been through similar experiences rather than to learn the hard way, [...]
Answer Question
| April 13, 2010 3:18 PM
Network design, Networking in 2010, Subnet Setup, Subnetting
subneting
suppose you have the following ip address 192.165.10.0 and you want to create 3 subnets (2 with 16 computers and the other with 60 computers)answer the following questions:- (a)what is the subnet mask in each case? (b)in each case indicate the sub network identity( network id),first host address, last host address and the broadcast address [...]
Answer Question
| March 27, 2012 7:16 AM
Subnets, Subnetting
suppose you have the following ip address 192.165.10.0 and you want to create 3 subnets (2 with 16 computers and the other with 60 computers)answer the following questions:- (a)what is the subnet mask in each case? (b)in each case indicate the sub network identity( network id),first host address, last host address and the broadcast address [...]
Answer Question
| March 27, 2012 7:16 AM
Subnets, Subnetting
subnetting.
given 45.30.138.217/14 class a, 1st useable IP 45.28.0.1 how did they get 45.28.0.1?
Answer Question
| February 25, 2010 7:16 PM
IP Subnetting, Subnetting
given 45.30.138.217/14 class a, 1st useable IP 45.28.0.1 how did they get 45.28.0.1?
Answer Question
| February 25, 2010 7:16 PM
IP Subnetting, Subnetting
computer networks subnetting
I want to connect 125 computers in a network to the internet, I only have 4 public IP addresses. the computers are in the range of 172.16.1.1/16 through 172.16.1.125/16. What else do I need to allow these computers to access the internet?
Answer Question
| January 20, 2010 7:36 PM
Calculating and understanding subnetting, Network requirements, Subnetting
I want to connect 125 computers in a network to the internet, I only have 4 public IP addresses. the computers are in the range of 172.16.1.1/16 through 172.16.1.125/16. What else do I need to allow these computers to access the internet?
Answer Question
| January 20, 2010 7:36 PM
Calculating and understanding subnetting, Network requirements, Subnetting
Computer network subnetting
I want to connect 125 computers in a network to the internet, I only have 4 public IP addresses. the computers are in the range of 172.16.1.1/16 through 172.16.1.125/16. What else do I need to allow these computers to access the internet?
Answer Question
| February 8, 2011 1:39 AM
IP addressing, ISP, Network Configuration, Network management, Network Topology, public IP addresses., Subnetting, TCP/IP
I want to connect 125 computers in a network to the internet, I only have 4 public IP addresses. the computers are in the range of 172.16.1.1/16 through 172.16.1.125/16. What else do I need to allow these computers to access the internet?
Answer Question
| February 8, 2011 1:39 AM
IP addressing, ISP, Network Configuration, Network management, Network Topology, public IP addresses., Subnetting, TCP/IP
How do i find the IP range?
[strong]How do i find the IP range [/strong] [strong] for [em]172.16.4.0/30[/em][/strong]
Answer Question
| January 5, 2010 7:04 AM
IP address, IP addressing, IP range, Subnet, Subnet mask calculation, Subnetting
[strong]How do i find the IP range [/strong] [strong] for [em]172.16.4.0/30[/em][/strong]
Answer Question
| January 5, 2010 7:04 AM
IP address, IP addressing, IP range, Subnet, Subnet mask calculation, Subnetting
Two Subnets – Three Routers + DSL Modem
Is the following setup valid for creating two subnets (192.168.2.xxx and 192.168.3.xxx) that both access a single internet connection but are isolated? ROUTER A WAN –> DSL Modem ROUTER B WAN –> ROUTER A LAN ROUTER C WAN –> ROUTER A LAN Settings: Router A WAN – PPoE, etc. etc. LAN – 192.168.1.1 / 255.255.255.0 DHCP [...]
Answer Question
| December 30, 2009 6:28 AM
Linksys, Network Configuration, Routers, Subnets, Subnetting, Windows XP
Is the following setup valid for creating two subnets (192.168.2.xxx and 192.168.3.xxx) that both access a single internet connection but are isolated? ROUTER A WAN –> DSL Modem ROUTER B WAN –> ROUTER A LAN ROUTER C WAN –> ROUTER A LAN Settings: Router A WAN – PPoE, etc. etc. LAN – 192.168.1.1 / 255.255.255.0 DHCP [...]
Answer Question
| December 30, 2009 6:28 AM
Linksys, Network Configuration, Routers, Subnets, Subnetting, Windows XP
packet tracer implementation
can somebody give me a packet tracer implementation with 302 computers? with subnetting table. tnx
Answer Question
| December 14, 2009 11:26 AM
Packet Tracer, Subnetting
can somebody give me a packet tracer implementation with 302 computers? with subnetting table. tnx
Answer Question
| December 14, 2009 11:26 AM
Packet Tracer, Subnetting
How to subnet networks to separate guest Internet access from server access.
I have a small network system in my office, and I have three optional network points for guests. The problem is that guests can access our server when they are connected to the Internet. How can I separate Internet access from server access through Subnetting for the guests?
Answer Question
| September 18, 2009 6:54 PM
guest, network access point, Subnetting
I have a small network system in my office, and I have three optional network points for guests. The problem is that guests can access our server when they are connected to the Internet. How can I separate Internet access from server access through Subnetting for the guests?
Answer Question
| September 18, 2009 6:54 PM
guest, network access point, Subnetting
ip addressing and subnetting…
ei…i need help bout ip addressing and subnetting… if i have 8 pc and i want it to network them…is there a recommended ip address for this?or can i just configure it with myself by just putting some numbers on it…is there any calculations do i have to make before setting this on?
Answer Question
| May 3, 2010 7:32 AM
Calculating and understanding subnetting, IP addressing, Subnetting
ei…i need help bout ip addressing and subnetting… if i have 8 pc and i want it to network them…is there a recommended ip address for this?or can i just configure it with myself by just putting some numbers on it…is there any calculations do i have to make before setting this on?
Answer Question
| May 3, 2010 7:32 AM
Calculating and understanding subnetting, IP addressing, Subnetting
subnetting and ip
what is the easiest way to learn ip addressing and subnetting
Answer Question
| December 6, 2010 11:51 PM
IP addressing, Subnetting
what is the easiest way to learn ip addressing and subnetting
Answer Question
| December 6, 2010 11:51 PM
IP addressing, Subnetting
Subnet Mask?
Can you please tell me how to find mask when only subnets are known?e.g find out mask when subnets are 50?
Answer Question
| July 1, 2009 6:35 AM
Subnet mask calculation, Subnets, Subnetting
Can you please tell me how to find mask when only subnets are known?e.g find out mask when subnets are 50?
Answer Question
| July 1, 2009 6:35 AM
Subnet mask calculation, Subnets, Subnetting
