• Subnetting processes

    Hi,guys one basic question.I am feeling so shy to ask this question.Can you please tell the procedure of whole sub-netting process.I know but i forgotten.with 2/3 examples.please dont mind.

    yans112112290 pointsBadges:
  • Subnetting Question.

    You have an IP address of 172.16.3.57 with an 11-bit subnet mask. What is the network D, range of subnet address and broadcast address for the subnet?

    reindolf5 pointsBadges:
  • How do i find the IP range?

    How do i find the IP range for 172.16.4.0/30?

    Ameera20 pointsBadges:
  • Subnetting and IP

    What is the easiest way to learn IP addressing and subnetting?

    Pfahl22120 pointsBadges:
  • Understanding Subnetting

    What is the most simple way to understand subnetting?

    Meatech25 pointsBadges:
  • Select correct subnet mask

    Given an IP address range, select the correct subnet mask for the scenario. IP address: 200.4.82.0/24 You need to create 6 networks with a minimum of 28 hosts per network. What is the correct subnet mask and the 3rd subnet range?

    Dlellis4540 pointsBadges:
  • CCNA Question

    This is confusing to me unless I am not seeing the bigger picture. It says configure the router Ip addresses on the E0 and S0 interfaces so that the E0 receives the 11th usable subnet while the S0 receives the 4th usable subnet from the network 192.168.191.0/28. Both interfaces should receive the...

    sedrick105 pointsBadges:
  • CCNA Question

    This is confusing to me unless I am not seeing the bigger picture.It says configure the router Ip addresses on the E0 and S0 interfaces so that the E0 receives the 11th usable subnet while the S0 receives the 4th usable subnet from the network 192.168.191.0/28. Both interfaces should receive the...

    sed4521d5 pointsBadges:
  • How do I find the IP range?

    How do I find the IP range for this: 10.14.6.1/30

    Sanju1115 pointsBadges:
  • subneting

    suppose you have the following ip address 192.165.10.0 and you want to create 3 subnets (2 with 16 computers and the other with 60 computers)answer the following questions:- (a)what is the subnet mask in each case? (b)in each case indicate the sub network identity( network id),first host address,...

    Gooodle5 pointsBadges:
  • Interview

    Good morning People! Tomorrow I'm going for an interview for CCNA/network engineer I have one problem since I completed my Diploma I've never been exposed to the field now I don't know what to expect tomorrow can you guys help me here what can I expect at the interview could you please help me be...

    Lloyds5 pointsBadges:
  • Segmenting a piece of our Windows network

    How can we segment a piece of our Windows network so users from the same subnet can not access it but people on that side of the network and a different subnet can. Currently they can communicate freely between each other.

    NewnanIT1,110 pointsBadges:
  • Computer network subnetting

    I want to connect 125 computers in a network to the internet, I only have 4 public IP addresses. the computers are in the range of 172.16.1.1/16 through 172.16.1.125/16. What else do I need to allow these computers to access the internet?

    Melyndalea5 pointsBadges:
  • Problem with NAT

    Hi All. I have a Netgear WGR164v9 wireless router connected to internet directly by public IP and this router performing DHCP for wireless LAN ip subnet is 192.168.1.x. A server (DNS,DHCP & RRAS with NAT) connected with this router by ip 192.168.1.6 which has another subnet 192.168.10.x for LAN...

    Russelsc40 pointsBadges:
  • ip addressing and subnetting…

    ei...i need help bout ip addressing and subnetting... if i have 8 pc and i want it to network them...is there a recommended ip address for this?or can i just configure it with myself by just putting some numbers on it...is there any calculations do i have to make before setting this on?

    Yoyie5 pointsBadges:
  • How can i supply a subnet address from a DHCP server on a 172.16.x.x

    How can i supply a subnet address from a DHCP server on a 172.16.x.x with a 172.17.x.x through a secondry DHCP Server?

    2goodcfc10 pointsBadges:
  • routing between subnets.

    I have a machine with two eth cards. one is 192.168.1.254, the other 0.254. my gw is 192.168.1.1. I was to make the default gw for my 0/x (eth0) network the 192.168.1.254 (eth1) network. Can this be done?

    ITKE342,795 pointsBadges:
  • Subnetting in a 6-floor building: Expert advice?

    The company I work for is expanding and as such has just purchased a new building and we will be moving staff and resources over there as well as keep the current premises. As it's better to get the advice of others who have been through similar experiences rather than to learn the hard way, which...

    ITKE342,795 pointsBadges:
  • subnetting.

    given 45.30.138.217/14 class a, 1st useable IP 45.28.0.1 how did they get 45.28.0.1?

    399305 pointsBadges:
  • computer networks subnetting

    I want to connect 125 computers in a network to the internet, I only have 4 public IP addresses. the computers are in the range of 172.16.1.1/16 through 172.16.1.125/16. What else do I need to allow these computers to access the internet?

    Kimmy665 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following