• CCNA Question

    This is confusing to me unless I am not seeing the bigger picture.It says configure the router Ip addresses on the E0 and S0 interfaces so that the E0 receives the 11th usable subnet while the S0 receives the 4th usable subnet from the network 192.168.191.0/28. Both interfaces should receive the...

    sed4521d5 pointsBadges:
  • How do I find the IP range?

    How do I find the IP range for this: 10.14.6.1/30

    Sanju1115 pointsBadges:
  • Multiple subnets on one physical network

    I am setting up a fairly large wireless network. We have a fibre connection to the internet for a small community wireless project to give high speed to the 10-20 houses in the area. The router device is a windows PC running with two NIC cards, it is hardened down to very minimal services, with...

    Johnshoff60 pointsBadges:
  • Routing between two subnets & between two networks

    1. I have two separate networks 192.168.0.0 and 192.168.1.0, they are physical connected by CAT5 cable. What should I configure and where to configure so that the host of each network can connect to another host in other network? 2. I have two subnets (after subnetting a class B Network), they are...

    Chinmoymohanty0 pointsBadges:
  • How to connect two subnets and two isp’s with Cisco RV042G

    I recently bought a Cisco RV042G dual wan router and it served it's primary function of load balancing two internet connections straight out of the box! I was impressed.. Regrettably I hit the limits of my (limited) networking knowledge with the following problems. Let me describe my network first:...

    heijligers15 pointsBadges:
  • Configuring two subnets

    I have 2 subnets that need to be configured on 192.168.7.0 block. There is a pc in each subnet that need ip addresses configured, the gateway address to the Router, there is also a switch that dose not need to be configured. So there is 1 pc in subnet (A)that has 110 host and 1 in subnet (B)that...

    BaucomS15 pointsBadges:
  • No Connection to Mail Server

    I have a subnet (192.168.12.0) that for some reason the workstations cannot access the mail server (located on the dmz) to retrieve or send mail. The workstations can get internet and any other services but not mail. I have checked the firewall but no changes have been made on the access list. I...

    Jdleon85 pointsBadges:
  • Network reconfiguration

    I am changing our network from a flat network (LANSPAN) to a network with subnets and VPN's. Currently there is just one router at a central location that the other 7 schools point back to for Internet access. The 7 locations all make up one domain that link back to this central location. What is...

    Skenny175 pointsBadges:
  • ADS configuration in different subnets

    I have one network running in 192.168.1.0/24, ADS in 2000server and exchange in 2003 on a member server also have FTP and file servers .I want to setup a different subnet and move 50 clients from the existing NW. and to use the same Servers in the existing NW .I have done the following things and I...

    sumeshbnr1,675 pointsBadges:
  • Wireless router on different Subnet

    Here's what I've got. 2 internet connections router 1: 192.168.10.1 router 2: 192.168.11.1 bothe connect to a load balancer at 192.168.254.254 SBS server acting as DHCP on the 192.168.254.X scope router 1 is a wireless router (netgear WGR614v9) When i try and connect to the wireless, i cant get an...

    Markikona5 pointsBadges:
  • subneting

    suppose you have the following ip address 192.165.10.0 and you want to create 3 subnets (2 with 16 computers and the other with 60 computers)answer the following questions:- (a)what is the subnet mask in each case? (b)in each case indicate the sub network identity( network id),first host address,...

    Gooodle5 pointsBadges:
  • Access to Internet from subnet 2 using subnet 1 modem/router

    Hi, I'm not an expert on network, but I do make some effort to learn about. After 3 weeks around implementing a network sructure on my office, I admit that something is escaping from me andI cannot make communication between the 2 networks that I have!  :( Well, the main objective is to access to...

    ZedaEsquina5 pointsBadges:
  • 2 Small Business Servers on one network using subnets

    I have a client that recently moved into a new office. He wants to setup a small business server.  Unfortunately the small office he rents from has a SBS running on their existing setup.  He's currently pulling Internet from them and that's all. He does not have his own ISP.  One option being to...

    Sfishermade30 pointsBadges:
  • Interview

    Good morning People! Tomorrow I'm going for an interview for CCNA/network engineer I have one problem since I completed my Diploma I've never been exposed to the field now I don't know what to expect tomorrow can you guys help me here what can I expect at the interview could you please help me be...

    Lloyds5 pointsBadges:
  • Accessing a Server on a different subnet

    I have a t1 line that goes into a switch, off the switch there are two routers one operating on the subnet 192.168.1.1 and the other on 192.168.0.1. Both routers have individual static ip addresses. I have a ReadyNAS storage device on 192.168.1.100. I want to be able to access the server from both...

    Admccurdy5 pointsBadges:
  • Cisco 3750 – EIGRP not on common subnet problen

    I'm getting lots of messages on a router IGRP-IPv4:(50)(Default-IP-Routing-Table:50): Neighbor 10.13.1.251 not on common subnet for Vlan11 i tried to ping but 10.13.1.251 doesnt respond show ip route shows 10.13.1.251 is directly connected on Vlan1. This must be off one of the trunk ports but how...

    Jlymn45 pointsBadges:
  • Subnet Mask

    [strong]I would like to know how to convert the subnet mask into allowable subnets and hosts. For example, I have a class C subnet mask of 255.255.255.224. How do I know that this allows 6 subnets and 30 hosts? My text book is not very clear on this. [/strong]

    Riffmaker2475 pointsBadges:
  • Authentication for more than one subnet

    I have about 8 vlans on my catalyst switch connecting pple to the internet.I want to configure authentication for all the users on the vlans. vlan 1 192.168.11.1 255.255.255.0 vlan 2 192.168.12.1 255.255.255.0 vlan 3 192.168.13.1 255.255.255.0 ... vlan 8 192.168.18.1 255.255.255.0 What type of...

    ralph12360 pointsBadges:
  • Subnet routing

    Will the way I setup my network and router to talk to multiple net cards on one PC from other PC on separate network work? First PC with two network cards First network card IP 192.168.3.106 Sub 255.255.255.0 Gateway 192.168.2.100  Second network card IP 192.168.5.106 Sub 255.255.255.0 Gateway...

    AllyU5 pointsBadges:
  • Using ACL to block traffic from internal LAN

    What is an ACL and how can I use one to block traffic from our internal LAN to a remote subnet?

    TeachMeIT975 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

Thanks! We'll email you when relevant content is added and updated.

Following