• Tape Usage/Capacity

    I have a 400GB TDK Ultrium 3 tape. I add several libraries to this tape each month. I use the DSPTAP option and print out the tapes contents each month after adding libraries to it. My question is. How do I determine what's used and what's available (in size). In other words. If the tape has a...

    DLM2007285 pointsBadges:
  • Solid state drives (SSDs) in the enterprise: What’s your take?

    Vendors are speaking more and more to the benefits of SSD's at different levels of the organization -- not just for user machines, but also at the server level and for storage arrays. What's your take? Do you see solid state drives as an eventual standard for the enterprise environment? If no, why?

    JennyMack4,280 pointsBadges:
  • Installing Win XP on SATA drive system

    Our school was given some used computers that have one or two SATA drives installed, with Win 2000 Server. The computers boot OK, but I want to reformat the drives and install XP Pro. However, when I boot from the XP CD, it tells me that "setup cannot find any hard drives" on the system. what must...

    Britinga425 pointsBadges:
  • How can I send a vidoe file to over a hundred emails on a network system without it crashing?

    My high school would like to have video annoucements every week, but we v=can not figure out a way to broadcast the video without th esystem crashing. The prinicpal thought that we could have the file sent out to each classroom but then it would need to be sent thought the disricts website and...

    Deathlycake15 pointsBadges:
  • SQLCOD = -7008 when doing an insert into file using SQLRPGLE

    Hi, I'm trying to insert selective records from one file into the same file in another library. I have to do this for many file. Am building the query dynamically using SQLRPGLE. Am using a PREPARE statement and an EXECUTE statement to run the query. While the PREPARE statement ends fine, am...

    SasiKumar0 pointsBadges:
  • How to reset the password??

    Hi, How to reset the password through a CL program. The user has forgotten his password, even ADMIN doesn't know the password. Thanks, Rama krishna

    0 pointsBadges:
  • RAID level comparison: data protection vs. redundancy

    With respect to the tradeoff between redundancy vs. data protection, what recommendations can you make on RAID levels? Is it completely dependent on the environment, or are there clear advantages to using a RAID 5 over RAID 3, etc.?

    ITKE354,390 pointsBadges:
  • Inquiry about Disk Partition Alignment for better performance

    Hi I read that disk partition alignments should have an offset of 64k rather than the default 32k for better sql server performance. Can you tell me more about the requirements for implementing this change? For instance, can this be done after the disks have been inproduction for some time without...

    KansasCoder40 pointsBadges:
  • Configuring a two-RAID LUN

    I need to expand a couple of LUNs and am seeking advice regarding how to proceed. We are using a Dell/EMC Clarion 300. We have two RAID groups (1 and 2) that had multiple LUNs on each RAID group with the LUNs assigned to different servers (I know, bad idea). Only one server uses the two RAID groups...

    ITKE354,390 pointsBadges:
  • Explaining “cyclic redundancy error”

    how can i copy data from a cd that shows"cyclic redundancy check error" upon copying data from it ?

    Okk5 pointsBadges:
  • Password Recovery

    Hello All, We currently run Lotus Notes with the data folder and .id files stored on a network drive which is only accessable by single client and administrators. This causes a problem when the client forgets their password. An administrator has to go in Delete the .id file and replace it with the...

    Lotusloon0 pointsBadges:
  • Office to home backup

    I have a PC at home wich I would like to use for backing up my office file. I can conect remotely, using logmein to manually transfer files. Now I would like to progress further and set up an automatic back up system for over night back ups. Can some one please give guidance and recommendations on...

    AlanLy5 pointsBadges:
  • EMC CX4 VS Netapp 3140 VS Lefthand SAN/iQ

    I would like to know what SAN is best to implement ESX 3.5. In regards to features, management, and useable space. If anyone here went through the process of implementing any of these products why did you choose the one you have. If you're using 2 of the 3 or maybe all, why do you like one over the...

    Jhiraldo5 pointsBadges:
  • Uploading Flash Translation Layer(FTL) to SSD

    Is there any development KIT for me to upload or improve FTL resident in SSD ? For example, I'd like to devise a wear-leveling algorithm and equip it to a real SSD, not to a simulator. Thanks in advance.

    ITKE354,390 pointsBadges:
  • ADAMM error with BackupExec 11d

    Good morning, I have just taken over the position of backup operator in my department, so please forgive any seemingly obvious questions. I have received several puzzling errors in the past few days, and hope I can get some answers as to what is causing them. First, this is the setup I am using: We...

    Lonewolfbw525 pointsBadges:
  • How Long Does a Backup Exec Cleaning Job Take?

    I have a cleaning job that  been at 10-12% for 12 hours.  Is this normal? This is backup exec version 10d with updates and an HP LVD tape library on Windows 2k.  I know it's old, but the backups work.  Cleaning is the primary issue. I have experimented with running Bacula with the tape drive...

    Dirtyjuheesus20 pointsBadges:
  • New disks for AS/400

    I want to add new disks to my AS/400. I have 6x36Gb in RAID 5. I want to add 2x146Gb in mirror. My question is. Would it be added to the ASP 1, or I must create a different ASP (ASP 2?) for the new disks as the RAID configuration is not the same.

    JamGdm5 pointsBadges:
  • Exchange 2007 TSM backups

    We are testing backups and restores using Tivoli Storage Manager Exchange TDP. So far I am happy with the results but I am testing it on a newly created Exchange 2007 CCR server with only 3 mail boxes in one mail store. Does anyone have experience with TSM and Exchange 2007 and can tell me how it...

    Technochic57,010 pointsBadges:
  • Can I use a Pc with a fast Sata Drive as a terminal server

    I have 2 hp terminal servers each running windows 2003, with exchange. Each has a hard drive of 35 GB. We have over 30 thin clients being serviced by these servers . We have now 20 new users and will need another terminal server. Can I use a PC with a fast sata drive as the terminal server. If so...

    Alanyegambaram15 pointsBadges:
  • How do you “share” a 3583 tape library between two AS/400 systems?

    What do you need to configure to be able to share a 3583 tape media library between two systems using BRMS? System A is running V5R4, System B is V6R1. Have BRMS with the network feature on each. Two tape drives in the 3583. Fiber channel connections through a SAN switch. Network feature works...

    mcl2,740 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following