Iseries fails to boot
I have a v5r4 820 model that failed. Error code in display is 284C3203 which pointed to I/O problem for either system board or Disk controller. I replace both and the only way I can get past this error is by using the new disk card with the new RAID memory. The old RAID memory [...]

Answer Question   |  December 5, 2008  3:11 PM
AS/400, AS/400 error messages, Error ID 284C3203, IPL, iSeries, iSeries 820, RAID, Tape drives, V5R4
asked by:
5,130 pts.

Problem in NTBackup – Error returned while creating the Volume Shadow Copy: 0×80042306
Hi I have windows server 2003 SP2 enterprise edit., Suddenly i am facing problem in NTBackup. It was working fine earlier. When i see backup report it shows following error massage Volume shadow copy creation: Attempt 1. Error returned while creating the volume shadow copy:0×80042306. Volume shadow copy creation: Attempt 2. Error returned while creating [...]

Answer Question   |  December 5, 2008  4:25 AM
Error 0x80042306, Error in NTBackup, NTBackup, Volume Shadow Copy, volume shadow copy:0x80042306 error, Windows Server 2003, Windows Server 2003 SP2
asked by:
5 pts.

Internet Storage and File Sharing
I am a small business owner and need an internet storage solution that will allow me to share files with other employees, and keep all of my files secure. I need about 5 log ins and I was hoping to find something that operated like a real server where we can save everyhing on it, [...]

Answer Question   |  December 4, 2008  12:09 AM
file sharing, Internet Storage Solution, Online Storage, Storage
asked by:
5 pts.

Half duplex vs full duplex
Recently the application running on one of our clusters had problems when some of the servers had problems accessing the NFS storage. The analysis showed there to be a mismatch between the QFE interfaces and the network protocol. The QFEs were operating at half duplex while the network was expecting full. The cluster servers had [...]

Answer Question   |  July 21, 2009  6:11 PM
Full Duplex, Half Duplex, Network Interface Cards, NFS, NFS Storage, RAID
asked by:
5 pts.

New member contest: ASK, Answer and Win a $50 Amazon gift card
As 2008 winds to a close, IT Knowledge Exchange has one more fun contest to end the year. From today until December 23rd, you can enter to win one of ten $50 (US) Amazon.com gift cards. There are two things, however, that you must do in order to enter: 1. Ask 2 questions 2. Answer [...]

Answer Question   |  June 22, 2012  3:45 PM
AS/400, CIO, CRM, Database, DataCenter, DataManagement, Development, Exchange, Linux, Lotus Domino, Microsoft Windows, Mobile, Networking, Oracle, Security, SQL Server, Storage, Virtualization, VoIP
asked by:
16,755 pts.

Configure User Profile after server formatting
Hi, I have 90 machine in company Last Two Incidence Server has to be formated after that install ad ,dns and all But after that every user profile has to reconfigure bze of shareing and network problem any type of solution to after the formating server no need to reconfigure the user profile Thanks

Answer Question   |  December 3, 2008  9:05 AM
Disaster Recovery, Incident response, Server installation, User profiles, Windows Server 2003
asked by:
185 pts.

How organizations deal with network design for disaster recovery
I am looking for some information about how organizations deal with network design for disaster recovery. Specifically, my issue is about DNS domains, and whether to have a single network with a redundant warm site in a single domain shared by production processing, requiring unique IP addresses and server names in the secondary site, and [...]

Answer Question   |  December 2, 2008  10:53 PM
Disaster Recovery, DNS, Network design, Networking, Organizations, Testing
asked by:
1,545 pts.

iSCSI Initiator not connecting to servers
Currently I have HP SAN environment setup using ISCSI. The servers within the SAN are connected straight to the network via Cat5 cable. The servers are connected to the array and Initiator via ISCSI. The issue I am having is the 3 servers I have connected to the initiator do not reconnect upon reboot. When [...]

Answer Question   |  July 16, 2011  3:38 PM
Event ID 10, iSCSI, iSCSI Error, iSCSI Initiator, SAN
asked by:
1,695 pts.

Fibre Channel Card Drivers to access SCSI layer
Are there comercially available Fibre Channel Cards with drivers that allow direct access to the low level SCSI commands on a disk?

Answer Question   |  January 15, 2009  2:13 PM
Fibre channel, Fibre Channel Card, SCSI
asked by:
15 pts.

Installation time for disk drives
How much time should be allocated to install a 5095 with one 2780 PCI-X Ultra RAID Disk Controller and 12 – 4327 70.56GB 15k rpm Disk Drives?

Answer Question   |  November 9, 2012  8:20 PM
DASD, RAID, RAID Disk Controller
asked by:
DAB
65 pts.

Ethernet Not Available
I recently updated my windows because my c: drive quit working. I had to install windows on d: drive in order to get my computer to even work. I then updated my c: drive with windows update (I had to have windows on the computer in order to update my c: drive-c: drive was missing [...]

Answer Question   |  December 3, 2008  3:04 PM
Ethernet, Hard drives, Installation, Updates
asked by:
5 pts.

Install IDE drive as slave on a Vista Dual Core Processor w/SATA primary drive
First: Got a new Vista machine (pentium Dual Core Processor) w/SATA hard drive. Want to install a 5 year old 40 gig Western Digital IDE drive as a slave for storage. The motherboard has what looks like a connection for an IDE drive. The connection on the board is blue to match the blue end [...]

Answer Question   |  December 9, 2008  7:54 PM
Hard drives, IDE, IDE hard drives, SATA, SATA hard drives, Secondary hard drive, Slave drives, Vista, Windows Vista
asked by:
170 pts.

C drive disk defragmentation
What would cause my C drive not to fully defrag when I run the scan?

Answer Question   |  February 1, 2012  7:27 PM
Defragmentation, Disk defragmentation, Hard drives, Windows XP
asked by:
20 pts.

USB SATA/IDE adapter
I can not get into the files from the old sata drive? How can i get into the files with out placing the old hdd back into the case

Answer Question   |  December 1, 2008  12:26 AM
Hard drives, IDE hard drives, SATA hard drives, USB hard drive adapter, USB hard drives
asked by:
5 pts.

Database maintenance task (full back up) fails on SQL Server
Hi My daily maintenance job fails due to the below error from last 20 days regularly Executing the query “BACKUP DATABASE [shipment] TO DISK = N’D:backupshipment.bak’ WITH NOFORMAT, NOINIT, NAME = N’shipment’, SKIP, REWIND, NOUNLOAD, STATS = 10 ” failed with the following error: “Write on “D:backupshipment.bak” failed: 112(error not found) BACKUP DATABASE is terminating [...]

Answer Question   |  July 10, 2009  5:38 PM
Backup to Disk, SQL Server 2005, SQL Server 2005 backup, SQL Server 2005 maintenance, SQL Server administration, SQL Server backup, SQL Server maintenance
asked by:
GIG
240 pts.

DataBase Restore
I’m working with SQL Server 7 and I made a backup from a DataBase and I need to restore it, but this error appear: “The RAID set for database is missing member number 1″. What can I do???

Answer Question   |  December 2, 2008  2:00 PM
RAID, SQL Server 7.x, SQL Server database, SQL Server database restore, SQL Server errors
asked by:
15 pts.

External CD writer
I have recently purchased a second hand memorex CD writer and although it looks in fine order and will play discs I cannot get it to copy/write/or burn discs. It is connected to my PC with a USB – Do I need a driver? or something. If so how do I go about this. Can [...]

Answer Question   |  January 26, 2012  4:25 PM
CD Burner Drivers, CD Burners, Disk drives, Drivers, External Disk Drives, Hardware Drivers
asked by:
20 pts.

How to build or install RAID in Windows XP?
hello to all, i m using window Xp and now want to installed RAID ,but i ve no idea, so kindly ,how to installed RAID and wat is the installation method, thank you.

Answer Question   |  June 21, 2011  6:13 AM
RAID, RAID configuration, Windows XP
asked by:
20 pts.

What type of training is needed to install and manage the HP BladeSystem c7000?
Recently my company has acquired a bladesystem c7000. What type of training must I attend to install and manage the c7000, and storage.

Answer Question   |  November 3, 2010  10:22 PM
Blade Server Installation, HP, HP BladeSystem, HP BladeSystem c7000, Storage Blades, Storage training
15 pts.

Is synchronous replication possible between EMC DMX4 and EMC CLARiiON CX3-80?
I would like to know whether synchronous replication is possible between EMC DMX4 and EMC Clariion Cx3-80 storage systems. I understand MirrorView software replicates only between two Clariion CX models and SAN Copy configured on the Clariion CX3-80 could only do asynchronous replication, but does not provide the complete end-to-end protection.

Answer Question   |  August 6, 2009  10:07 PM
Asynchronous replication, Data Replication, EMC, EMC CLARiiON, EMC CLARiiON CX3, EMC CLARiiON CX3-80, EMC DMX-4, EMC MirrorView, EMC Symmetrix DMX-4, MirrorView, Replication, Synchronous replication
asked by:
215 pts.