Deleted files are coming back after login
My company has Windows Server 2003 Enterprise Edition. There are 15 clients who are connected through domain (Active server directory), and all are suffering the same problem. All deleted files are coming back after login.
Answer Question
| December 31, 2008 6:58 PM
Deleted files, Windows Server 2003, Windows Server 2003 Enterprise Edition
My company has Windows Server 2003 Enterprise Edition. There are 15 clients who are connected through domain (Active server directory), and all are suffering the same problem. All deleted files are coming back after login.
Answer Question
| December 31, 2008 6:58 PM
Deleted files, Windows Server 2003, Windows Server 2003 Enterprise Edition
IDE – SATA drive combo
I followed the discussion about putting IDE drives into a system with SATA drives. I’ve done this successfully, but on one machine (Win XP Pro), the system constantly reboots if an IDE drive is attached to the cable marked ‘slave’. I removed the jumper according the instructions on the drive. Is there a fix for [...]
Answer Question
| December 15, 2008 2:34 PM
Hard drives, IDE, IDE hard drives, SATA, SATA Hard Drive, Windows XP
I followed the discussion about putting IDE drives into a system with SATA drives. I’ve done this successfully, but on one machine (Win XP Pro), the system constantly reboots if an IDE drive is attached to the cable marked ‘slave’. I removed the jumper according the instructions on the drive. Is there a fix for [...]
Answer Question
| December 15, 2008 2:34 PM
Hard drives, IDE, IDE hard drives, SATA, SATA Hard Drive, Windows XP
Red Hat Enterprise Linux 3.0 on HP StorageWorks EVA4400
I’m desinging a solution that envolves a HP EVA4400 and several servers multi-OS. Two of them are Red Hat Enterprise 3.0 and the info i’ve got on support by HP is that RHEL3.0 is not supported on EVA4400. Would like to know if anyone has tryed to configure S.O. RHEL3.0 based server on HP EVA4400. [...]
Answer Question
| December 12, 2008 10:51 AM
Enterprise Virtual Arrays, EVA4000, EVA4400, HP Enterprise Virtual Arrays, HP EVA4000, HP EVA4400, HP StorageWorks EVA, Linux, Linux administration, Red Hat Enterprise Linux, Red Hat Enterprise Linux 3, RHEL, RHEL3
I’m desinging a solution that envolves a HP EVA4400 and several servers multi-OS. Two of them are Red Hat Enterprise 3.0 and the info i’ve got on support by HP is that RHEL3.0 is not supported on EVA4400. Would like to know if anyone has tryed to configure S.O. RHEL3.0 based server on HP EVA4400. [...]
Answer Question
| December 12, 2008 10:51 AM
Enterprise Virtual Arrays, EVA4000, EVA4400, HP Enterprise Virtual Arrays, HP EVA4000, HP EVA4400, HP StorageWorks EVA, Linux, Linux administration, Red Hat Enterprise Linux, Red Hat Enterprise Linux 3, RHEL, RHEL3
How do I determine the price ranges for an iSeries?
I am interested in understanding how much an iSeries costs (mid-range and enterprise level systems) and its associated hardware components such as DASD, memory, etc.. I have been browsing the internet, but I have not come across a site that clearly lists the price for a specific iSeries model or lists the price for all [...]
Answer Question
| December 15, 2008 6:36 PM
AS/400, DASD, IBM, iSeries, iSeries Cost, iSeries Pricing
I am interested in understanding how much an iSeries costs (mid-range and enterprise level systems) and its associated hardware components such as DASD, memory, etc.. I have been browsing the internet, but I have not come across a site that clearly lists the price for a specific iSeries model or lists the price for all [...]
Answer Question
| December 15, 2008 6:36 PM
AS/400, DASD, IBM, iSeries, iSeries Cost, iSeries Pricing
Intel ISCSI Remote Boot error message TCP/IP
Using Windows Server 2003 and get this error when using Intel ISCSI remote boot “ERROR: Could not establish TCP/IP connection with iSCSI target system.” Using Pro/1000 server adapters and Dell Poweredge 2900 server
Answer Question
| February 3, 2009 6:12 PM
Dell PowerEdge 2900, Intel ISCSI Remote Boot, iSCSI, iSCSI SAN, TCP/IP
Using Windows Server 2003 and get this error when using Intel ISCSI remote boot “ERROR: Could not establish TCP/IP connection with iSCSI target system.” Using Pro/1000 server adapters and Dell Poweredge 2900 server
Answer Question
| February 3, 2009 6:12 PM
Dell PowerEdge 2900, Intel ISCSI Remote Boot, iSCSI, iSCSI SAN, TCP/IP
Data in libraries on the AS/400
What is the total amount of objects in a library? How do I figure this out?
Answer Question
| December 11, 2008 9:34 PM
AS/400, Libraries and archives
What is the total amount of objects in a library? How do I figure this out?
Answer Question
| December 11, 2008 9:34 PM
AS/400, Libraries and archives
Restoring spool files from a system save on V5R4 System i
How can I restore spool files from V5R4 entire system save?
Answer Question
| February 23, 2010 9:27 PM
AS/400 backup, Spool File save and restore, System i, V5R4
How can I restore spool files from V5R4 entire system save?
Answer Question
| February 23, 2010 9:27 PM
AS/400 backup, Spool File save and restore, System i, V5R4
Backup commands for AS/400
I have a few questions… What commands do I use to see how big the backup is? I want to backup AS400 to a NAS Server at another location. So we have a off site copy. Is that possible? if so, how do I do it? I’m also open to opinions…
Answer Question
| December 11, 2008 9:25 PM
AS/400 backup, NAS devices, Remote backups
I have a few questions… What commands do I use to see how big the backup is? I want to backup AS400 to a NAS Server at another location. So we have a off site copy. Is that possible? if so, how do I do it? I’m also open to opinions…
Answer Question
| December 11, 2008 9:25 PM
AS/400 backup, NAS devices, Remote backups
Dell Poweredge 2800 will not reboot after RAID 5 install
I have a Dell Poweredge 2800. My situation is that i added 2 hard drives and setup Raid 5 successfully. I installed windows server 2003 and it finds the drives. “a disk read error has occurred” Any help?
Answer Question
| December 16, 2008 3:44 PM
Dell PowerEdge 2800, Hard Drive Installation, RAID, RAID 5, Server configuration, Windows Server 2003
I have a Dell Poweredge 2800. My situation is that i added 2 hard drives and setup Raid 5 successfully. I installed windows server 2003 and it finds the drives. “a disk read error has occurred” Any help?
Answer Question
| December 16, 2008 3:44 PM
Dell PowerEdge 2800, Hard Drive Installation, RAID, RAID 5, Server configuration, Windows Server 2003
Exchange server 2003 Backup Exec 11d error message
User submitted I am receiving the following error with some backup jobs e000fe39 – The path is too long and cannot be processed. The job was using the local drives for selecting what to back up. [Our BE software is installed on the same box as the exchange server]
Answer Question
| December 11, 2008 3:35 PM
Backup Exec 11d, Backup Exec Error Messages, Exchange 2003, Exchange 2003 and Backup Exec 11d, Exchange Backup
User submitted I am receiving the following error with some backup jobs e000fe39 – The path is too long and cannot be processed. The job was using the local drives for selecting what to back up. [Our BE software is installed on the same box as the exchange server]
Answer Question
| December 11, 2008 3:35 PM
Backup Exec 11d, Backup Exec Error Messages, Exchange 2003, Exchange 2003 and Backup Exec 11d, Exchange Backup
Backup Exec
can i exclude DLECache2.chc from backup
Answer Question
| December 10, 2008 1:14 PM
Backup Exec, DLECache2.chc
can i exclude DLECache2.chc from backup
Answer Question
| December 10, 2008 1:14 PM
Backup Exec, DLECache2.chc
PCMCIA UNKNOWN_MANUFACTURER
I have a SanDisk CompactFlash card that has been working in all of my laptops except for the newest one I just got. When I put the card in the new laptop it recognizes that a card has been inserted because the new hardware install dialog pops up but it can’t find any drivers for [...]
Answer Question
| December 9, 2008 2:46 PM
Laptops, PCMCIA CARDS, SanDisk CompactFlash
I have a SanDisk CompactFlash card that has been working in all of my laptops except for the newest one I just got. When I put the card in the new laptop it recognizes that a card has been inserted because the new hardware install dialog pops up but it can’t find any drivers for [...]
Answer Question
| December 9, 2008 2:46 PM
Laptops, PCMCIA CARDS, SanDisk CompactFlash
SD to SDHC card reader
Just purchased and Acer Aspire One Netbook. Love it. It sports 2 card readers, both SD card (up to 4gb)capable. I understand that the newest SD card readers are capable with a firmware upgrade handling the SDHC format. Windows tells me I have a “JMCR SD/MMC SCSI Disk Device”. Can anyone help? Thanks. Vaughn
Answer Question
| December 10, 2008 10:35 PM
firmware upgrade, SD cards, SDHC
Just purchased and Acer Aspire One Netbook. Love it. It sports 2 card readers, both SD card (up to 4gb)capable. I understand that the newest SD card readers are capable with a firmware upgrade handling the SDHC format. Windows tells me I have a “JMCR SD/MMC SCSI Disk Device”. Can anyone help? Thanks. Vaughn
Answer Question
| December 10, 2008 10:35 PM
firmware upgrade, SD cards, SDHC
Backup Exec 11D error after Exchange Server 2007 SP1 upgrade
This is the issue i am running into my Backup Exec 11D jobs fail since Exchange Server 2007 SP1 upgrade was completed get this message in my logs Unable to complete the operation for the selected resource using the specified options. The following error was returned when opening the Exchange Database file: -514 The version [...]
Answer Question
| December 9, 2008 9:09 PM
Backup, Backup Exec 11d, Backup Exec Error Messages, Exchange 2007, Exchange Server 2007 SP1, Symantec Backup Exec 11D, Veritas Backup Exec
This is the issue i am running into my Backup Exec 11D jobs fail since Exchange Server 2007 SP1 upgrade was completed get this message in my logs Unable to complete the operation for the selected resource using the specified options. The following error was returned when opening the Exchange Database file: -514 The version [...]
Answer Question
| December 9, 2008 9:09 PM
Backup, Backup Exec 11d, Backup Exec Error Messages, Exchange 2007, Exchange Server 2007 SP1, Symantec Backup Exec 11D, Veritas Backup Exec
Backup Exec 11d Catalog problem
I just installed Backup Exec 11d on a Windows 2003 server with sp2. I am using an Ultrium lto2 tape drive. It works fine except I have two tapes filled with data that were created on a different installation. One tape went through inventory and catalog fine. The other goes through inventory, but won’t catalog. [...]
Answer Question
| December 8, 2008 3:43 PM
Backup, Backup Exec 11d, Backup server hardware, Backup software, Backup to Tape, Symantec Backup Exec 11D, Tape backup, Ultrium LTO-2 Tape Drives, Windows Server 2003
I just installed Backup Exec 11d on a Windows 2003 server with sp2. I am using an Ultrium lto2 tape drive. It works fine except I have two tapes filled with data that were created on a different installation. One tape went through inventory and catalog fine. The other goes through inventory, but won’t catalog. [...]
Answer Question
| December 8, 2008 3:43 PM
Backup, Backup Exec 11d, Backup server hardware, Backup software, Backup to Tape, Symantec Backup Exec 11D, Tape backup, Ultrium LTO-2 Tape Drives, Windows Server 2003
EMC Network Backup Client/Agent backup for SQL 2000/2005 databases on Polyserve Matrix
Hi, I am new with running SQL 2000/2005 instances on Polyserve Matrix servers. We use EMC Network as a corporate backup strategy. Can someone tell me will there be any problems using this backup tool for SQL instances on the Polyserve Matrix?
Answer Question
| December 8, 2008 10:17 AM
Backup, EMC backup, HP PolyServe Matrix Server, PolyServe Matrix Server, SQL Server 2000, SQL Server 2000 backup, SQL Server 2005, SQL Server 2005 backup, SQL Server backup
Hi, I am new with running SQL 2000/2005 instances on Polyserve Matrix servers. We use EMC Network as a corporate backup strategy. Can someone tell me will there be any problems using this backup tool for SQL instances on the Polyserve Matrix?
Answer Question
| December 8, 2008 10:17 AM
Backup, EMC backup, HP PolyServe Matrix Server, PolyServe Matrix Server, SQL Server 2000, SQL Server 2000 backup, SQL Server 2005, SQL Server 2005 backup, SQL Server backup
Backup – Access Denied even with full control
I run windows xp professional on my HP laptop. a while ago i setup accounts for family members that may wish to use it so they didnt mess anything of mine up. I had a folder called “backup” that I created whilst running under the default “administrator” profile. When I created their accounts including my [...]
Answer Question
| December 8, 2008 5:09 PM
Access denied, Administrative privileges, Backup, Data Recovery, Permissions, Windows XP, Windows XP backup
I run windows xp professional on my HP laptop. a while ago i setup accounts for family members that may wish to use it so they didnt mess anything of mine up. I had a folder called “backup” that I created whilst running under the default “administrator” profile. When I created their accounts including my [...]
Answer Question
| December 8, 2008 5:09 PM
Access denied, Administrative privileges, Backup, Data Recovery, Permissions, Windows XP, Windows XP backup
Entire System Backup
Before i was using small tape for Entire System Back up(Fmt5gb)but now i am using big tape (Qic 4gb) it take too long time to finish the back up how can i reduce the time
Answer Question
| December 30, 2008 5:12 AM
AS/400 backup, Backup, Backup to Tape, Entire System Backup, EntireSystemBackup, FMT5GB, iSeries backup, Tape backup
Before i was using small tape for Entire System Back up(Fmt5gb)but now i am using big tape (Qic 4gb) it take too long time to finish the back up how can i reduce the time
Answer Question
| December 30, 2008 5:12 AM
AS/400 backup, Backup, Backup to Tape, Entire System Backup, EntireSystemBackup, FMT5GB, iSeries backup, Tape backup
RAID
I currently have four 1 Terabyte HDD. I’m planning on setting up a RAID 1, however I would like to get more space. I researched RAID 5 and read plenty of negative opinions about it. I hate to waste so much space, but I can’t take such a large risk for data loss. If anyone [...]
Answer Question
| December 6, 2008 7:54 PM
RAID, RAID 1, RAID 1 vs RAID 5, RAID 5, RAID configuration
I currently have four 1 Terabyte HDD. I’m planning on setting up a RAID 1, however I would like to get more space. I researched RAID 5 and read plenty of negative opinions about it. I hate to waste so much space, but I can’t take such a large risk for data loss. If anyone [...]
Answer Question
| December 6, 2008 7:54 PM
RAID, RAID 1, RAID 1 vs RAID 5, RAID 5, RAID configuration
Trouble with SQL Server 2005 Upgrade Advisor when trying to detect an instance
I installed the SQL Server 2005 Upgrade Advisor so I can analyze our SQL Server 2000 instance and DTS packages. Even though SQL Server 2000 is up and running, it does not recognize our instance when going to the pull-down menu, nor does it recognize it when I key in the instance name. We are [...]
Answer Question
| December 5, 2008 6:34 PM
SAN, SQL Server 2000, SQL Server 2005, SQL Server 2005 Upgrade Advisor, SQL Server Upgrade Advisor, Windows Cluster
I installed the SQL Server 2005 Upgrade Advisor so I can analyze our SQL Server 2000 instance and DTS packages. Even though SQL Server 2000 is up and running, it does not recognize our instance when going to the pull-down menu, nor does it recognize it when I key in the instance name. We are [...]
Answer Question
| December 5, 2008 6:34 PM
SAN, SQL Server 2000, SQL Server 2005, SQL Server 2005 Upgrade Advisor, SQL Server Upgrade Advisor, Windows Cluster
