• Is anyone using Dell MessageOne for email continuity and archiving?

    I am tasked with gathering information and comparing Dell's MessageOne archiving and email continuity service, and compare it with our current Symantec Enterprise Vault. This is fairly difficult, because MessageOne is still fairly new, and it will be impossible to find someone that has used both....

    Nevermore92955 pointsBadges:
  • Looking for NAS solution

    I have a number of IDE drives (between 250GB - 500GB) that I have out grown over the years. I was curious whether anyone is aware of a NAS (100/GB Int) device or similar chasis / enclosure (USB/Firewire) that accepts IDE drives and is affordable? I would prefer to have all three connections. I need...

    ITKE440,580 pointsBadges:
  • Need to get exchange server working with windows server 2003

    A school has a exchange server and the server crashed. They reinstalled windows 2003 server std and now the need to get the exchange server working. All the data for exchange was on another partition. How can i get this data to work with the new installation of exchange? There is no backup.

    ITKE440,580 pointsBadges:
  • iSCSI SAN how many IP Addresses are needed?

    We are planning to implement an iSCSI SAN. There are 4 controllers, each with 2 iSCSI ports. How many IP addresses are needed for the ISCSI SAN

    ITKE440,580 pointsBadges:
  • outlook 2003 is not archiving some items older than a specified date

    I am experiencing the situation that "Archive" is not archiving all emails that suppose to be included when "items are older than the specified Date". I get otherones but not all of them. Thank you.

    Leero25 pointsBadges:
  • Does the log_file_name_convert parameter only rename the redo log files in a dataguard?

    Hello I've installed a Oracle RAC 10gR2 with two nodes and using the dataguard in a single database. I'm using a different SAN to both environments (all the servers are linux). I'm using the physical mode for replications and using the OMF (I'm using the ASM to handle the storage with the OMF...

    Cmota5 pointsBadges:
  • Disk in Array is not recognized RAID 5 configuration

    I have a Highpoint ATA 454 RAID controller set up in a RAID 5 configuration with 4 disk. One of the disks in the in array is no longer recognized as a member because of one bad block. How can I "unmark" this disk as defective, and force it as a member of the array?

    ITKE440,580 pointsBadges:
  • How to backup all the shared folders from NAS storage to tape drive?

    I have one NAS storage in my LAN network. It is UNIX os & it is on the Workgroup not domain. I created for each employee his own folder on the storage to backup his critical files. I have more than 500 employees in my company. Currentlly, I bought one server (Windows 2003 ) with LTO4 tape drive. I...

    Afaneh5 pointsBadges:
  • Exchange 2007 SP1 is running on ESX3.5 VMware memory leak

    Exchange 2007 SP1 is running on ESX3.5 VMware. (mailbox VM and HT/CAS running on another VM) 16 Gig Ram allocated to mailbox server 5 Storage groups Runs GREAT for about one week then needs to be rebooted because of a memory leak? This is most noticeable when the Backup Exec job that backs up the...

    ITKE440,580 pointsBadges:
  • Backup Exec 11d on Windows Server 2003 SBS is hanging

    I have a Windows 2003 SBS server running Backup Exec 11d SP3 After installing MS updates from the most recent cycle, the BE Server service hangs in a "starting..." state. I have performed a full uninstall and reinstall, testing with each listed patch level to no avail. I enabled debugging in BE,...

    ITKE440,580 pointsBadges:
  • SAN questions – SAN array sizing

    1. SAN: Can it support multiple concurrent accesses? 2. What are the trade-off's between SAN array size and number of concurrent indexer processes (take note indexers will be constantly polling, renaming and deleting files) if i am creating an indexer? 3. SAN: Upon scaling are there any potential...

    ITKE440,580 pointsBadges:
  • Please help with Windows ME external drive problem

    Thanks in advance for anyone who can help. I have looked for hours all over the internet for a similar problem but couldn't find anything like mine. I have two computers one running XP and one with ME. Recently I bought a SimpleTech 320gb usb external hard drive . I first had it formatted NTFS but...

    NortyNasty5 pointsBadges:
  • Is ATL 3.0 still good?

    I'm reading http://www.microsoft.com/msj/0299/atl3Activex/atl3Activex.aspx but it's from 1999. Is it still good?

    FredMackie60 pointsBadges:
  • Trouble creating a RAID array with VMWare ESX3i

    Hi, We’ve set up VMWare ESX3i on a single disk on our HP DL140 Server. We’re now trying to set up a RAID array, using the in-built LSI Logic SAS1068 RAID controller. Unfortunately, it says that there’s not enough space at the end of the disk, and it would need to be formatted, in order to...

    Vmwareuser20 pointsBadges:
  • Best practices for backups

    I have been doing some research around solving the ever present issue of data backup for companies that have massive amounts of data and zero backup windows. I have my own ideas on this, but I was wondering the route others are taking. Any Ideas?, or any real world examples?. Is tape elimination on...

    ChristopherPoelker0 pointsBadges:
  • Can RAID 0 volume be deleted and re-added with no data loss?

    I have a Dell Precision 690 Workstation with an LSI Integrated RAID controller. I have a 2-disk RAID 0 (what LSI refers to as an IS or Integrated Striping) volume. Recently the motherboard was replaced (and the RAID controller is integrated onto the motherboard). Ever since the motherboard...

    Rsheldon6215 pointsBadges:
  • Fibre Channel Card Drivers to access SCSI layer

    Are there comercially available Fibre Channel Cards with drivers that allow direct access to the low level SCSI commands on a disk?

    Wharrison0615 pointsBadges:
  • Veritas Backup Job Engine

    I keep getting access denied error messages when I try to start the Veritas Backup Job Engine. I need this to run to do the backups...why won't it start? Thanks all.

    Charlestodd5 pointsBadges:
  • My removable drive not using the complete 16gb volume, What needs to be done?

    I have a 16gb memory card, formatted fat32, I am trying to add data, 8gb, I get a notice that there is not enough disk space. It is plugged into a usb port. What needs to be done to access the complete volume? Can this be reformatted ntfs? I tried there is no way that I can see to do it.

    Robk9215 pointsBadges:


    RESPUGA25 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

Thanks! We'll email you when relevant content is added and updated.