• Encryption key management

    Looking for info on encryption of data for backup purposes, either at the tape drive, VTL, SAN switch or some type of appliance in the backup path. Encryption Key management is more critical than the encryption solution. This request for help was originally submitted to the Research Assistant on...

    ResearchAssistant855 pointsBadges:
  • Backups to disk across GB ethernet – what’s your speed limit?

    We don't have a SAN yet. We're trying to improve backup and disaster recovery time windows so we have been testing backups to disk using the following: Windows 2003 Server Dell PowerEdge server 2GB RAM 2xXeon P4's Veritas Backup Exec 9.1 (backup file size set to 1GB each) SATA hardware RAID...

    CanesThing0 pointsBadges:
  • 3Par and EMC problesm

    I have a Sun x4100 has two qlogix qle2460 HBAs both connected to a 3Par SAN and a EMC cx700 SAN. When both HBA's are active in non-failover mode we can see the LUNs in /proc/scsi/qla2xxx/3 and 4 - BUT fdisk does not see the devices. If we have the HBAs set in failover mode we only see the LUNs on...

    Mberger5 pointsBadges:
  • CX-500 LUNs

    A SearchStorage.com reader recently asked: Am presenlty Testing the I/o performance on the new CX-500 San From Emc And Hba From Emulex,The LUn Size is 1 TB and when doing the Testing with SQlIO Tool with a I/o block size-8 i get 39.3 MB/sec for Random write requestes but when doing the same with...

    Andrew Burton320 pointsBadges:
  • EMC Clariion CX700 Problems – Data Sector Invalidated

    Hello, I have two EMC Clariion CX700's (which, for convenience we call CX700-1 and CX700-2) and one recently added CX3-40 in my SAN environment using fiber-switch fabric. Over the weekend, I experienced a hardware failure on SPA on CX700-1. After having it replaced by my vendor's technician and...

    UniCal0 pointsBadges:
  • Equallogic

    Hi, Just looking for people's experiences of using Equallogic SAN attached storage. Specifically - Performance - Interoperability - Cost - Competition - Management software Thanks in advance Noz

    Nozmeister00 pointsBadges:
  • Backup issue

    the backup job running daily, but i found that the same job can't complete 3 days ago. There no any error message, only the job status is running, but byte count stop. I have tried to stop the job and restart it. The problem still happen. What happens of that issue??

    FrankyLam5 pointsBadges:
  • mailbox size

    although i configured all users mailbox ouatas to the defult mailbox database (300 mb) many users have less than it (78 mb)why this happen and how to solve

    Essam10 pointsBadges:
  • AS400 discs

    Hi. This may seem a dumb question, but we are decommisioning an old AS400 - can anybody tell me where the discs are ?!

    Sauk5 pointsBadges:
  • SETSYS DSSXMMOD

    Yes, I am very new to storage, very very new. An upgrade is been done to one of the systems I'm working on. A Websphere programmer needs me to enable( assumming its disabled )the functionality of HSM to use DFSMSdss in a seperate address space by adding the command SETSYS DSSXMMOD(Y) into the HSM...

    Eugene15 pointsBadges:
  • Storing text documents in tables in SQL Server 2005

    I have a table in SQL Server 2005 which is used to store text/word documents, and I have enabled full-text search on the column and included a corresponding document type for the document. The problem is when I upload a real NotePad Text/MS Word document saved from the NotePad/MS Word application....

    SQL Server Ask the Experts2,585 pointsBadges:
  • Increasing server performance

    Help reviving servers. Configuration current: 8 300GB disks in Raid 5 10000RPM Each. Total 2TB (70%Full) with an average of 68kb files tottal of 24 million files. The curent read rate is at 8MB/Sec on NTFS windows 2003 Partition. Any suggestions on increasing performance on current configuration....

    Dimchik0 pointsBadges:
  • Host based Striping of LUNs

    I'm looking for some information regarding host based striping of LUNs - specifically to improve performance. I have a Raid 5 LUN that hold a database. I know that I have a latency issue on this LUN so i'm debating whether to split the LUN into two seperate Raid 5 LUNS then stipe these using host...

    Geddesb0 pointsBadges:
  • BRMS and Tape Library on iSeries (AS/400) with concurrent backup of LPARs

    Hi, I have a TS3500 Tape Library which has four LTO-3 drives. The system that I am running on is iSeries 870 with OS version V5R3. The 870 system has a total of 6 LPARs (Logical Partitions), each running the same OS V5R3. Recently, the BRMS for this version of V5R3 was implemented. Now, the...

    Soma65 pointsBadges:
  • SCSI RAID arrangement

    What?s the fastest & most secure SCSI RAID arrangement (cost is not an issue). What makes it fast and what makes it secure?

    1111100 pointsBadges:
  • Archiving a row of data into another database on SQL Server 2005

    I work on SQL Server 2005, and I need to archive a row and its relationship into another database. I know a script could be written to do this, but I would like to know if software exists that could be given the data row and then complete the archiving by itself. Is this possible?

    SQL Server Ask the Experts2,585 pointsBadges:
  • Exchange 2000 SP3 on Windows 2000 SP4. I had a hard drive issue on the server.

    My company is running Exchange 2000 SP3 on Windows 2000 SP4. I had a hard drive issue on the server. I set up a new server and restored my information store from backup and ran the eseutil /cc. That worked fine and my store is in a "clean shutdown" state. The problem is that my back up was a little...

    ITKE366,420 pointsBadges:
  • how to remove tapes listed in the BRMS media invenory on iSeries, which dose not belong to this box?

    On our HABOX (AS400 partition with BRMS), we have few volumes (media tapes) that do not belong to this partition. I need to delete/remove them from the HABOX, while maintaining them from the LIVEBOX where they are used and needed. I tried all the basic processes like expiration, changing locations...

    MAXi15 pointsBadges:
  • Lotus Archiving

    Whenever I try to create a archive settings docuemnt, I get an error.when I click on 'In views/folders' of the archive criteria settings document it displays an error 'object variable not set'. We are using Lotus Domino 6.5.4

    MSNewbie5 pointsBadges:
  • Impact on TSM backups after an upgrade to SQL Server 2005

    What would the impact be on TSM backups if I undertook a side by side upgrade of SQL Server 2000 SP4 to SQL Server 2005 SP2?

    SQL Server Ask the Experts2,585 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following