• Does the log_file_name_convert parameter only rename the redo log files in a dataguard?

    Hello I've installed a Oracle RAC 10gR2 with two nodes and using the dataguard in a single database. I'm using a different SAN to both environments (all the servers are linux). I'm using the physical mode for replications and using the OMF (I'm using the ASM to handle the storage with the OMF...

    Cmota5 pointsBadges:
  • Disk in Array is not recognized RAID 5 configuration

    I have a Highpoint ATA 454 RAID controller set up in a RAID 5 configuration with 4 disk. One of the disks in the in array is no longer recognized as a member because of one bad block. How can I "unmark" this disk as defective, and force it as a member of the array?

    ITKE364,175 pointsBadges:
  • How to backup all the shared folders from NAS storage to tape drive?

    I have one NAS storage in my LAN network. It is UNIX os & it is on the Workgroup not domain. I created for each employee his own folder on the storage to backup his critical files. I have more than 500 employees in my company. Currentlly, I bought one server (Windows 2003 ) with LTO4 tape drive. I...

    Afaneh5 pointsBadges:
  • Exchange 2007 SP1 is running on ESX3.5 VMware memory leak

    Exchange 2007 SP1 is running on ESX3.5 VMware. (mailbox VM and HT/CAS running on another VM) 16 Gig Ram allocated to mailbox server 5 Storage groups Runs GREAT for about one week then needs to be rebooted because of a memory leak? This is most noticeable when the Backup Exec job that backs up the...

    ITKE364,175 pointsBadges:
  • Backup Exec 11d on Windows Server 2003 SBS is hanging

    I have a Windows 2003 SBS server running Backup Exec 11d SP3 After installing MS updates from the most recent cycle, the BE Server service hangs in a "starting..." state. I have performed a full uninstall and reinstall, testing with each listed patch level to no avail. I enabled debugging in BE,...

    ITKE364,175 pointsBadges:
  • SAN questions – SAN array sizing

    1. SAN: Can it support multiple concurrent accesses? 2. What are the trade-off's between SAN array size and number of concurrent indexer processes (take note indexers will be constantly polling, renaming and deleting files) if i am creating an indexer? 3. SAN: Upon scaling are there any potential...

    ITKE364,175 pointsBadges:
  • Please help with Windows ME external drive problem

    Thanks in advance for anyone who can help. I have looked for hours all over the internet for a similar problem but couldn't find anything like mine. I have two computers one running XP and one with ME. Recently I bought a SimpleTech 320gb usb external hard drive . I first had it formatted NTFS but...

    NortyNasty5 pointsBadges:
  • Is ATL 3.0 still good?

    I'm reading http://www.microsoft.com/msj/0299/atl3Activex/atl3Activex.aspx but it's from 1999. Is it still good?

    FredMackie60 pointsBadges:
  • Trouble creating a RAID array with VMWare ESX3i

    Hi, We’ve set up VMWare ESX3i on a single disk on our HP DL140 Server. We’re now trying to set up a RAID array, using the in-built LSI Logic SAS1068 RAID controller. Unfortunately, it says that there’s not enough space at the end of the disk, and it would need to be formatted, in order to...

    Vmwareuser20 pointsBadges:
  • Best practices for backups

    I have been doing some research around solving the ever present issue of data backup for companies that have massive amounts of data and zero backup windows. I have my own ideas on this, but I was wondering the route others are taking. Any Ideas?, or any real world examples?. Is tape elimination on...

    ChristopherPoelker0 pointsBadges:
  • Can RAID 0 volume be deleted and re-added with no data loss?

    I have a Dell Precision 690 Workstation with an LSI Integrated RAID controller. I have a 2-disk RAID 0 (what LSI refers to as an IS or Integrated Striping) volume. Recently the motherboard was replaced (and the RAID controller is integrated onto the motherboard). Ever since the motherboard...

    Rsheldon6215 pointsBadges:
  • Fibre Channel Card Drivers to access SCSI layer

    Are there comercially available Fibre Channel Cards with drivers that allow direct access to the low level SCSI commands on a disk?

    Wharrison0615 pointsBadges:
  • Veritas Backup Job Engine

    I keep getting access denied error messages when I try to start the Veritas Backup Job Engine. I need this to run to do the backups...why won't it start? Thanks all.

    Charlestodd5 pointsBadges:
  • My removable drive not using the complete 16gb volume, What needs to be done?

    I have a 16gb memory card, formatted fat32, I am trying to add data, 8gb, I get a notice that there is not enough disk space. It is plugged into a usb port. What needs to be done to access the complete volume? Can this be reformatted ntfs? I tried there is no way that I can see to do it.

    Robk9215 pointsBadges:
  • I RECECEIVED A CPPEA55 ERROR MESSAGE

    MY TAPE DRIVE WENT DEAD PULLED IT OUT. I ISSUED A PWRDWNSYS COMMAND. IT WENT DOWN BUT I DID NOT UNPLUG THE BOX. AS SOON AS I BROUGHT THE BOX BACK UP I RECEIVED A CPPEA55 ERROR MESSAGE.

    RESPUGA25 pointsBadges:
  • A Sharepoint farm with a Shared Service Provider name containing a space will cause backup failure with meta data errors

    I have Microsoft Office SharePoint 2007 installed in our office. Recently I have deployed Symantec Backup Exec 11d with Microsoft SharePoint agent option. I have configured the backup job and got the error “A Sharepoint farm with a Shared Service Provider name containing a space will cause backup...

    Mirfan10 pointsBadges:
  • What should our next contest be on ITKnowledgeExchange.com?

    We want to kick off the new year with an exciting contest and want your input. We have done a variety of contests from the top 3 Knowledge Point earners winning prizes like an XBOX 360. Also we have had Amazon.com gift cards for the top 10 point earners who achieve over 500 Knowledge Points. I want...

    ITKE364,175 pointsBadges:
  • Will adding eATA interfere with my current RAID setup?

    I just go a new eATA 1.5 TB harddrive what i like to ad to my setup as data back up drive on board i have 4 eATA conections 2 are used for raid 0 this is the setup CybertronPC X-Cruiser SLI AMD Gaming PC – AMD Athlon 64 X2 5000+ 2.6GHz, 4GB DDR2-667, 2x250GB SATA II (RAID 0), DL DVD±RW, 2x...

    Webpanther5465 pointsBadges:
  • Diskless Install iSCSI Remote Boot with Intel Pro 1000/PT NIC Windows 2008 Installer doesnt see LUN

    Hello I have a Dell 2950 ||| and it has an Intel Pro 1000/pt Dual Port Server Adapter in it. I have configured the adapter for iSCSI remote boot, and during server startup the NIC is able to connect to my iSCSI LUN (Windows Storage Server w/ iSCSI Target Installed). When I go to install Windows...

    Jalalin75 pointsBadges:
  • Move Exchange 2000 to new hardware

    We plan to do an offline backup and restore to new hardware with Veritas Bare Metal Restore. We want to do an offline backup to prevent any mail flow. I have seen an article that talks about skipped files with offline backups of Exchange. Has anyone tried this before? Any advise?

    Caroline25 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following