• Backing up entire virtual machines.

    I want to backup all my virtual machines, as a whole. Not just files on a virtual machine, I want to grab the whole virtual machine. Is there a way to automate this? I have about 10 virtual servers, each has between 2-5 virtual machines running. I am using Hyper-V

    ITKE376,290 pointsBadges:
  • scsi

    What scsi interfaces allow up to 16 devices, including the adapter, to be connected on a single shared cable?

    Junior01295 pointsBadges:
  • Performane issues on my Subversion (SVN) server on NFS (NetApp)

    I have some performane issues on my Subversion (SVN) server on NFS, before we migrate our data to NFS (NetApp storage) it is in a local hard drive of the server and the check-out is fast, compare to NFS the time it took is double. Does any body here have some best practices on Subversion on NFS? We...

    T0ns5 pointsBadges:
  • Looking for multi-vendor Storage Virtualization

    Need a "simple concept" to do the SAN Interconnect based Storage virtualization on multi vendor basis / heterogeneous SAN sub system based. And how much this will be helpful on ROI? -Guru

    GuruBhai95 pointsBadges:
  • Is SATA II disks adequate for running VMs

    I built a Hyper-V server, which has a 6 channel SATA II controller. I will use one disk to run he host OS (Windows 2008 Server Enterprise - Core) and will use the remaining 5 SATA II disks to run VMs on. In addition the system has the capacity to hold 32GB RAM, and has 2 Quad CPU sockets. My...

    BringITon5 pointsBadges:
  • Backup issues

    I am having problems with backing up a 2 volumes from my HP MSA1000 SAN to an LTO tape library. The volumes are 80 & 90 GB in size and contain around 600,000 small files in each set. The 2 volumes are RAID 5 and I am getting about 5-8 GB per hour back-up. I am also backing up other RAID 5 sets and...

    Jimste0 pointsBadges:
  • Any common tool for measuring controller throughput?

    I was searching for a long time for a simple tool which can tell us the controller throughput of any SAN environment. Its necessary for every Storage engineer to have this utility to cross verify the subsystem we buy. Ofcourse the vendor will have the tool or LAB benchmark for the same. But those...

    GuruBhai95 pointsBadges:
  • Partition Creation Error

    When trying to create a partition on a logical drive I receive the following error message: 'The Operation was cancelled due to an Internal error' and the partition failed to create. I have tried deleting the array and recreating the logical drive but it failed to resolve the issue. I have run...

    Gmil15 pointsBadges:
  • Which switch in my IP-based CCTV system project will combine camera controls?

    I need some help in selecting devices for an IP-based CCTV system project: We have 3 towers; each consists of 25 floors. A consultant planned to centralize the monitoring of 3 tower cameras in a security room on the ground floor. But before, the NVR was placed in each tower on the 5th floor. I...

    NetworkingATE1,545 pointsBadges:
  • How many of you are considering FCoE as a transition from Fibre Channel to Ethernet?

    How many of you are considering FCoE as a transition from Fibre Channel to Ethernet?

    DellStorage30 pointsBadges:
  • How do I setup a storage with multiple geographical location Sync?

    Iam planning to setup a storage which needs to be located in 5 geographical locations. The data which i write on the first location should get sysnc with rest 4 locations in no time. I dont want to invest more in procure higher bandwidth solutions. Is there any other way to sync the data by caching...

    GuruBhai95 pointsBadges:
  • VMware virtual infrastructure and Backup exec 12.5 error

    I have just installed Agent for VMware Virtual Infrastructure on my BackupExec 12.5 server. I have added Virtual Center Server and now am trying to browse it to select what virtual machines to backup but cant connect to VC

    ITKE376,290 pointsBadges:
  • Login syntax for ESX 3.5

    Hi all, I'm trying to get WINscp to log into ESH 3.5 so I can copy the VDMK's to a NAS box as a backup procedure, however not sure why I am getting access denied etc. I have put the entries for the firewall SSH client TCP 22 in and trying using scp or sftp. root@hostname.domainname.net.nz and...

    NZSolly15 pointsBadges:
  • error in connection between oracle8i&developer2000

    I'm installing Oracle8i on Windows 2000 professional on NTFS partition and on the same machine I'm installing Developer 2000 or form6 in a different partition. When I try to connect Developer to Oracle, I get the error "TNS could not resolve." Please provide a solution. Can I use Oracle8i...

    POWERINIT0 pointsBadges:
  • NTFS.sys error

    I have been given a laptop to fix. The error message that comes up when you boot it up is missing/corrupt file: system32/drivers/ntfs.sys. How do I fix the computer? Suggestions appreciated. Thanks.

    Jade057110 pointsBadges:
  • Attention Light on Tape Drive I5 Model 520

    We have an I5 Model 520, with a 5755 tape drive attached. We upgraded from V5R3 to V5R4 about a month ago and shortly after, the attention light on the tape came on (blinks). We thought maybe an IPL would clear this up or by cleaning the tape drive several times, but no luck. We can't seem to find...

    I5NEPA0 pointsBadges:
  • USB flash drives recognized as “floppy drive”

    I have a user who is using a USB Hub with 4 ports. Windows XP system will correctly recognize the USB harddrive and printers attached, but when the user inserts his USB flash drive, it recognizes it as a 3-1/2 Floppy. All USB flash drives used on his system have the same result. Even if he plugs it...

    OnTheEdge0 pointsBadges:
  • Netapps FAS960 vs. HP EVA 3000/5000

    Hi All, Does anyone know off hand were to get something comprehensive that will compare performace of the netapps kit and the HP kit mentioned in the subject line. I realise there is alot of different scenarios around FC and isci etc, what i am looking for is something that will outline the max...

    Justinwalker0 pointsBadges:
  • EMC CX-500 LUNs

    A SearchStorage.com reader recently asked: we have a EMC CX-500 with navisphere 6.0 in a switch fabric enviroment. how to find out, via command line, the LUN's that has been assigned to storage group and deivce name that appears on the host. LUN 101 <--> hostA: /dev/dsk/c0t1d5

    Andrew Burton340 pointsBadges:
  • Unable to enable option for showing hidden files

    I have not seen my hidden files. When i go in tools and folder option and tick show hidden files and then apply but after also i didnt see my files and automatically the tick is hidden files so please give me answer immediately.

    Luck5 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.