• HP EVA 8000 storage

    currently i am facing problem on HP EVA 8000 in my environment. Total storage size is 8 TB but on the command view console i can see total storage size is only 4 TB. i tried restarting following, 1) command view EVA service 2) SMA server 3) Controllers but didnt work out. i still can see total size...

    Neilcapri0 pointsBadges:
  • indexes status error Chkdsk won’t run on (SCSI) Disk 0 with FAT and NTFS Need advice.

    System indicates indexes status error: "index entry bac3pm.ini in index $130 of file 50" and "index error bac3pm.tmp in index $130 of file 50" and system running very slowly. Attempts to repair problem are prevented, I believe, because (SCSI disk 0) C: drive was set up with a small 39MB EISA...

    Toyonal0 pointsBadges:
  • SCSI Boot with IDE, old CMOS

    Compaq Deskpro EN 733/512 with Windows 2000 Server booting on 9GB SCSI drive, Adaptec controller. Active Directory, Domain Controller, WINS, file/database server. Drive getting full, Non-Profit on the Cheap, picked up a large IDE drive hoping to simply add it. Life is for learning, now I understand...

    VietBob0 pointsBadges:
  • hp scsi hot pluggable drive

    I had to replace a bad scsi drive. I pulled out the wrong drive. Turns out the drive I pulled out was the drive that all our data was being written to. At any rate, upon finding that out, I put the drive back in. There is no light on the drive. I know the drive is connected because when I go to the...

    Adaiyeg0 pointsBadges:
  • Sun Multipack 711 SCSI Hard Disk Array

    Can the Sun Multipack 711 SCSI Hard Disk Array be used with PCs having SCSI 1 or SCSI 2 cards, or with PowerMac with external SCSI 2 port? thank you for your attention. malcolm

    Fingercheck0 pointsBadges:
  • Cisco switch for iSCSI SAN

    A SearchStorage.com reader recently asked: I was wondering if you could recommend a Cisco switch that can be used for Exchange to SAN (NetApp FAS960C) iSCSI connectivity.

    aburton190 pointsBadges:
  • Intel ISCSI Remote Boot error message TCP/IP

    Using Windows Server 2003 and get this error when using Intel ISCSI remote boot "ERROR: Could not establish TCP/IP connection with iSCSI target system." Using Pro/1000 server adapters and Dell Poweredge 2900 server

    ITKE344,900 pointsBadges:
  • Looking for Antivirus for Win Storage 2003 x64 server

    Hi, We are looking for an antivirus software that proven to work well with windows storage 2003 x64 server. Our current product works just fine on all other 2003 servers, but it brings down this one from time to time. Thanks, Oksana

    Oksana0 pointsBadges:
  • NAS migration planning and backup options – whitepapers, books, advice!

    I'm looking for any info on NAS migration planning from a large Windows (2k3) file serving architecture (circa 300 servers and 80TB data) to a centralised NAS solution from either EMC or Netapps, though dont need product specific info. I'd really like to get my hands on a plan to show the tasks in...

    SwaggerUK0 pointsBadges:
  • Trouble copying large files to NAS – very slow, and often fails

    Hi all, I'm not an IT expert sadly, but am nevertheless lumbered with trying to manage our small company's half a dozen PCs networked over wired and wireless LAN. A couple of weeks ago one of them (the newest one, less than two weeks out of warranty!) had a massive hard disk failure and all data...

    Roope5 pointsBadges:
  • beginning SAN infrastructre for the company.

    On my windows 2 cpu server with 20 disks, disk queue lengths exceed 40. Windows perfmon and IOmeter benchmarks give me 0.9K IOPs for write and 2K for reads, 8K OLTP block size. #disks : 20 : 36 GB, 15K rpm, U320 scsi with two dual channel controllers with 256 MB cache each. I am moving to a SAN....

    Rkrishnan0 pointsBadges:
  • First SAN for my company and it is breaking the bank.

    On my windows 2 cpu server with 20 disks, disk queue lengths exceed 40. Windows perfmon and IOmeter benchmarks give me 0.9K IOPs for write and 2K for reads, 8K OLTP block size. #disks : 20 : 36 GB, 15K rpm, U320 scsi with two dual channel controllers with 256 MB cache each. I am moving to a SAN....

    Rkrishnan0 pointsBadges:
  • San

    Do you have information on SANs?

    Sandswept10 pointsBadges:
  • SQL on SAN, 16 or 1

    A client has 16 databases, one per teritory, all running the same application and all on the same server and all the files on a SAN. The data in the 16 databases could all run in just one database. Will running all the activity through one database be faster than running it through 16? All the...

    Mjhessler0 pointsBadges:
  • how do i access the physical hardisk from the virtual machin

    if i given some part to the virtual machin & then i want to access the physical partition from the virtual machin what will be the procidure for that.

    Networkom5 pointsBadges:
  • VMWare ESX vs. Virtual Center

    Looking at the VMware Infrastructure package. I've already got the SAN + switches, so it'd be a matter of buying server hardware and software licenses. The SAN I'm using is currently limited to 16 hosts. One of which is a physical server already up and running on it. Another would be the physical...

    ITKE344,900 pointsBadges:
  • VMWare ESX vmachine as BE 12 server

    @ my facility, I have a Dell 2950 running ESX 3.5. It is hosting 4 VMs, 1 XP and 3 W2K3 servers. On average it is utilized about 1/3 of it capability. I want to use on of the W2K3 VMs to run BackupExec 12 on to back up my server rack to a PowerVault 124T. I plan on using an Adaptec 29160 as the...

    Jkt5 pointsBadges:
  • How to fix this proble, i have installe VMWARE in Host Server 2003 EP, and configure it as AD, then the host was configured as Backup AD?

    VMWERE as configure as AD, and host Server later configure as BACKUP AD, when I try to reboot the host server can not login to VMWARE any more, any one please help?

    ITMX10 pointsBadges:
  • Can user data be protected from VMware snapshots?

    Last week, a big problem occurred at out data center: The physical server, upon which was hosted VMware and eight logical servers, reset itself. When we rebooted the system, we noticed that all data was wiped out. The logical servers were operational but data was gone. We called VMware support, and...

  • How does one guarantee the integrity of snapshot done at block level

    Hi, I have an equallogic SAN and I am looking at using the snapshot function for backup. My server are linux (redhat 4.0) with oracle database 10.2.0.3. What, if any, actions must I do to ensure that the snaphot made on the SAN (block level) is complete. In other word, does Linux have a cache...

    Ablanchard35 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following