SIP

Route SIP to PSTN

Hello! in the beautiful world of IT, is there a way for a windows machine on broad band connection to receive SIP calls and then route them to PSTN thru a modem or some other device? what software would be necessary for such task? thanks

Why is Cisco adopting the SIP protocol?

Our SearchNetworkingChannel.com expert says it's a good for Cisco to embrace SIP as a networking protocol standard alongside SCCP, or their Skinny Client Control Protocol. Do you agree? Why or why not?

Will B2BUA in Asterisk work as well as a SIP device or PBX on a SIP trunk provider?

Will B2BUA in Asterisk deployed over a plain IP connection work just as well or better than a SIP enabled device or PBX on a SIP trunk provider?

Is there an inherent issue with caller ID when using Asterisk as the SIP server?

Is there an inherent issue with caller ID when using Asterisk as the SIP server? My caller ID does not show the identity of the original outside caller, but one associated with an inside transfer point. Are there any special settings in Asterisk that need to be configured?

cisco call manager Ethereal/Wireshark Captures

Hi. Does someone has Ethereal/Wireshark captures of the signaling flows associated with the establishment of calls to/from CISCO Call-Manager to/from a SIP network. thanks

Dell Optiplex GX520 hibernation/sleep mode issues

Hello, We have several Dell Optiplex GX520's on the network running Windows XP pro. They randomly fall into sleep mode. Moving the mouse will not wake them - you have to push the power button to get them out of sleep mode. Also we are not able to remotely wake them to do patch updates or remotely...

Routing Between Two Subnets & Between Two Networks

1.I have two separe networks 192.168.0.0 and 192.168.1.0 ,they r physicall connected by CAT5 cable. What should i configure and where to configure so that host of each network can connect to other host in other network. 2.I have two Subnets(after subnetting a class B Network) ,they r physicall...

Routing Between Subnets and between networks

1.I have two separe networks 192.168.0.0 and 192.168.1.0 ,they r physicall connected. What should i configure and where to configure so that host of each network can connect to other host in other network. 2.I have two separe Subnets(after subnetting a class B network),they r physicall connected....

Network Connection Freezes

For some reason, at random, among 20 PCs on my network, in the morning or during the day, the network connection stops responding for both intranet and internet communications. The only solution thus far is to remove the NIC from the Device Manager, reboot the PC, and let Windows XP Pro find the...

Network Resource Allocation cum Planning cum Technical Problem

This is the real commercial problem face by my company. Well, the reason I ask this problem is I salute and respect all of you as I believe all of you are as good as network solution company out there, or even better!! Lets me rephrase the entire problem again. Company expand so fast that the...

g.729 3rd party VOIP on Cisco routers QoS - am I doing it right?

Hi, I am unsure about which configs are sufficient for implementing QoS on 2 2600 series routers over a 2MB serial link. On one side is the IP pbx and there are up to 6 IP phones plugged into a switch on the other side. We are using a non-cisco VoIP product using g.729. From what I can see all I...

Access point/router

I would really like to know the detailed difference between a router and an access point. Do I need access points if i am going to set up a network and have two routers already? How can i use a router as an access point if that's possible? Please explain. Thanks

Remote Syslog with MySQL and PHP

Dear All, i want to set up a Remote Syslog with MySQL and PHP on system with whitebox linux,can some tell me a step by step on how to install and configure this,also the requirement needed to complete the task Regards Edwin

Optimizing printing and imaging environment

how can i Optimize printing and imaging environment

Upgrade step from win nt and win 2000 to win 2003

I have windowsNT and window 2000 servers with active directory which i want to upgrade to windows 2003,all servers meet requirement for new vesion.Now can same help me on how to upgrade?what steps should i take

Restricted Groups

Hi Guys I have a query regarding the usage of restricted group in a domain enviroment. Could some pls explain the steps required to add Domain Administrator Account to the Local Administrators Groups of a node. I know this can be done but m not sure bout the steps. Please HELP!!!! Thanks Guys Asta...

Setup an sms to email gateway

Required to setup an sms to email gateway so that customers can SMS the problem they face with Internet or other systems and it can be uploaded into the systems using an email.

Guest or Cleint Need Internet COnnection Through Access Point from Proxy Server

Hello Lisa, Hope you are doing fine. Actually I had problem at my client place. The Internet is configure at server whos having two NIC Card, one for internet n other for Internal Network. Cleint getting internet connection through proxy. Now we included one Access Point to expand the network...

Implementing and configuring VPN Server

Hello, Shiraz, I want to implement n configure VPN Server, so that my mobiles users and employee can access there file and network through Securely VPN Connection. Can any body help me out of this.. I need complete n detailed about VPN Configurations. What Hardware n software do i need to have...

Installing Seperate Internet Connection for Managers

Hello, Myself shiraz, I got one problem. There are Five Floor in one Office which has Switches COnneted to each floor. They are getting LAN and WAN Connection through Centralized Wireless Server Room. Also We have access point to get connectivity from Head Office, which is just near to us. And...