• Check Point Firewall-1 ica Service Detection

    This vulnerability showed up on our network during PCI scanning. This function is necessary for our VPN connectivity. How do we configure this issue to adhere to PCI compliance?

    Buffalowings5 pointsBadges:
  • Trying to get my exchange server 2003 via ISP We are using SBS 2003 standard.

    My ISP (AT&T Yahoo) is dropping port 110 in favor of 995 with SSL. I am trying to get my exchange server do this with little luck. We are using SBS 2003 standard. Our mail is help at the ISP and direct to us via MX records.

    ITKE364,120 pointsBadges:
  • Microsoft Virtual Server 2005 and Windows Server 2008 installation issue

    I have Virtual Server 2005 R2 running on Windows Server 2003 SP2. When i try to install Windows Server 2008 with the ISO attached toVM i get the message that "installation has encountered and error and need to restart"

    ITKE364,120 pointsBadges:
  • VPN Tunnel

    Hello. This is my current setup. Main office has several servers (usual web, ftp, exchange, dns) which is using an RV042 router for the network. At the remote office, I have a Netgear FVS318v3 router that is maintaining the VPN tunnel back to the main office. I can't narrow down the problem. I...

    rcraig11420 pointsBadges:
  • Bridge vs router

    what are key differences between a bridge & router? I know that a bridge connect between WAN network and a router connect PC within a network. What else should I know?

    Spock12035 pointsBadges:
  • how do i see the routing table in hyper terminal

    how do i see the routing table in hyper terminal

    Linkdog25 pointsBadges:
  • Cisco wireless controller authentication

    Have serveral RDT devivces that are set up to Cisco Wireless controller. The devices are connecting and authenticating fine, but it seems when rdt's roam from 1 ap to another the rdt's need to re-authenticate even thought they are already authenticated. Can not find on the Cisco controller of...

    Phippsi5 pointsBadges:
  • Registry editor

    my pc's windows registry editor was disabled by administrator.i was supposed to be the administrator bcoz i own this pc.what can i do to enable my registry editor?i've tried opening my admin account but it doesn't say anything about changing settings with regards to registry.i hope u could help me....

    Gelmo10 pointsBadges:
  • Outlook 2003

    After security update, any links emailed to me..would no longer open up at all. Error report comes up "Mozilla crash Report" AND WE DO NOT USE MOZILLA WE USE INTERNET EXPLORER 7

    Canyoudigit5 pointsBadges:
  • Helpdesk Network Access to Local users and Groups on Workstations

    Hello We have a network that is a single domain with 16000 + workstations. I need to assign the helpdesk group access into to workstations "local users and Groups". They need to be able to reset the workstations local administrator password. I know that if you are in the domain admins group you can...

    Magoo105 pointsBadges:
  • How do I connect Mac OS X clients with Entourage to Exchange Server?

    Are there any specific settings I need to enable on Mac OS X clients or the Exchange server to allow Microsoft Entourage 2004 to connect to Exchange Server? I have not purchased a trusted certificate for the server yet. Do I need to? If so, which trusted certificate do you recommend?

    Exchange Ask the Experts580 pointsBadges:
  • One Sender’s e-mail does not arrive with me in Microsoft Outlook 2003 – but only one. I don’t know if my AVG security software is part of the problem

    I am running Microsoft Outlook 2003 and have an AVG Firewall and (apart from occasional glitches) don't have any problems with e-mail. One sender's e-mail however never arrives (my partner's). It goes into his "sent items" but never arrives at this end. I have added his address to my "safe senders...

    Chrisie20 pointsBadges:
  • FTP SSL AIX to Z/os

    I have set up FTP as SECURE ALLOWED on Z/os. I want to test an FTP from AIX and have it use SSL. How do I get it to read 'override' parameters of my FTP stack. i.e., the 'userid.FTP.DATA' file? Is there anyway to do that?

    Melissa295 pointsBadges:
  • Change my IP

    Hi all, There is a site, which provides access to a service if it comes from my office IP. Now I want to access the same service(or page) from home by making my home IP same as office ip, tricking the web site to believe that I am accessing from office. By the way the service uses https://........

    Sailas5 pointsBadges:
  • Advice on buying new PC

    I have a Pentium 4 & need to upgrade. I teach Microsoft, use graphics in my manuals, & use CorelDraw a lot. I also design huge Excel spreadsheets with lots of formulas and design databases in Access - what would be a good PC processor, ram, etc? I have been quoted on a system with a Quadcor...

    Shazzie70 pointsBadges:
  • ISA Server to Cisco PIX IPSec Tunnel

    I have a IPSec tunnel From a ISA 2004 Server to a Cisco Pix. The Pix is sending TTl's which is dropping the tunnel. How can I set the ISA 2004 to respond to them so that the tunnel doesn't keep dropping out.

    Tezzky5 pointsBadges:
  • Live Call Monitoring

    Do you know if we will be able to give our client access to monitor live calls remotely if we currently use Cacti and Cisco?

    Boricua12315 pointsBadges:
  • How to secure password in a multi user environment?

    I have a dilemma and I'm not sure what is the best way to go about it. I want my employees to have access to various websites, some do not have the option of setting multiple login with permissions so there's only 1 login. I want to use a password manager so it will automatically log in to those...

    Dropshipinc5 pointsBadges:
  • Securing a SQL Server 2008 database

    I am on SQL Server 2000, and to secure my database, I want the user to be prompted for a user ID and password before the database is expanded. How might I do this?

    SQL Server Ask the Experts2,585 pointsBadges:
  • Differences between values in a SQL Server 2005 database

    What is the difference between the Checksum and TornPageDetection values of the PageVerify option in a SQL Server 2005 database's properties?

    SQL Server Ask the Experts2,585 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following