HP EVA Continuous Access Replication
I am trying to replicate from a HP EVA 6300 to a HP EVA 4400 SAN. Both SAN’s are licensed with CA. I have a SAN switch fabric. Both SAN’s can view the remote host and there is a usable path present on both. When I try to create a DR group I am getting [...]

Answer Question   |  September 26, 2012  3:43 PM
HP EVA4400, SAN, SAN switches

Multipath configuration
Hi , how to configure multipath in the host side.here ia using HPXP24000 storage&having 2 SAN switchs ie  CiscoMDS9513 and 2 edge switchs ie cisco9124 for  each host . in our synaria each server having 2 hba ports.one port connected to 1st edge switch & 2nd port connected to 2nd edge switch.both edge switchs E port(trunk [...]

Answer Question   |  March 31, 2012  7:16 AM
Multipath propagation, SAN management, SAN storage spending, SAN switches

VMWare ESX vs. Virtual Center
Looking at the VMware Infrastructure package. I’ve already got the SAN + switches, so it’d be a matter of buying server hardware and software licenses. The SAN I’m using is currently limited to 16 hosts. One of which is a physical server already up and running on it. Another would be the physical VMware box. [...]

Answer Question   |  February 3, 2009  7:29 PM
SAN switches, Virtual Center, VMotion, VMware ESX, VMware infrastructure, VMware infrastructure Package

Encryption key management
Looking for info on encryption of data for backup purposes, either at the tape drive, VTL, SAN switch or some type of appliance in the backup path. Encryption Key management is more critical than the encryption solution. This request for help was originally submitted to the Research Assistant on WhatIs.com.

Answer Question   |  September 25, 2008  4:45 PM
Backup, Data encryption software, Encryption, Encryption key management, Research Assistant, SAN switches, Tape drives, VTL

SAN switches
why and when to configure zoning in the SAN switches any body can explian please

Answer Question   |  September 28, 2008  12:59 PM
SAN, SAN switches, Storage Area Networks, Storage products and equipment

Adding two addtional SAN switches to the Fabric
I have an HP eva5000 SAN with 2 contollers and 2 x 16 ports brocade switches – I have purchased two addtional 16 port brocade san switches – how do I go about adding them to the fabric? Core Edge design maybe?

Answer Question   |  July 24, 2008  7:51 PM
Brocade Switches, EVA5000, SAN, SAN switches, Switches

Cisco switch for iSCSI SAN
A SearchStorage.com reader recently asked: I was wondering if you could recommend a Cisco switch that can be used for Exchange to SAN (NetApp FAS960C) iSCSI connectivity.

Answer Question   |  February 3, 2009  3:36 PM
Cisco switches, FAS960C, iSCSI, iSCSI SAN, NetApp, SAN, SAN switches