• Remote Networks Routing not working

    danyortiz20 pointsBadges:
  • Internet routing

    What is the relation between an AS and wireless home-base internet router. Do you always get the same AS while browsing to different website? In the below two examples of a trace-route done by (3d Traceroute 2.4.40.7) bhn is the ISP in conjunction with Road Runner....

    aasalem70 pointsBadges:
  • Multiple Routing Min

    How to find multiple routing miin from Material NO.?

    sumitsv5 pointsBadges:
  • PPTP, local gateway, subnet routing.

    I'm having trouble combining the use of a pptp VPN connection to a remote host while keeping connectivety to our local network. I have found the tcp/ip option to not use a remote gateway and this solves the problem for about 50%. I do have access to anything within the 192.168.x.x range while...

    AlphaBootis95 pointsBadges:
  • InterVlan on Cisco 3560G series switch and Internet Access

    I have a cisco 3560G and 2911 series router.The Router has 2 internet interface.One is already configured to an unmanaged switch.The second interface is also configure and it can go to the internet.My task is to configure vlans on the switch and the vlans should communicate with each others.Also...

    ralph12360 pointsBadges:
  • Does cellular routing technology exist?

    What is the technology that would allow a call from a cell phone to be routed to a transmission device that triggers a loud beeping sound. For example, using a cell phone to call a number that calls a database, and then triggers an external receiver that is attached to one's keychain for example?

    Crosbycurious5 pointsBadges:
  • VOIP and Routing Question

    Please advise. We have a branch office with a Cisco 3560 48/port POE switch. The branch office has 20 users in VLAN 1. The switch interfaces with a Cisco 2811 router. The router has a T1 point to point to our main office. We are putting in VOIP so each user has a phone -> PC. How would I...

    Dprattmcse5 pointsBadges:
  • Routing Assistance

    I've been up way too long, and got a project tossed into my pile of work. For the life of me I can't seem to get this routed right. Here's the situation we have a server at one site, and another server at the other site. Both have networks currently communicating over Site 2 Site VPN, I need to get...

    Kel5 pointsBadges:
  • 3G – Creating a S2S VPN when the 3G card uses DHCP and not static?

    I have a 3G WIC card (HWIC-3G-GSM) in a Cisco 1841 and need to create an IPSEC tunnel to a Cisco ASA5520 Normally creating a S2S tunnel would be relatively easy if both peers used static IP's, however my 3G provider uses dynamic addressing. If I try and create an IPSEC S2S VPN peer on a...

    OrangeNewbie55 pointsBadges:
  • VLAN routing Problem

    Hi all I have a situation here, I have created some VLANs on a L3 switch(Nortel), no problem with this. Inter vlan routing is taking place over here as well. I have connected this L3 with a 2511 Cisco router. Here I want to mention one thing that all the VLANs can ping the outgoing port of the...

    Pikupiku74220 pointsBadges:
  • Do routers change packet IP info at each hop?

    I'm taking classes for CCNA certification and think my professor may be wrong about this... She says that at each hop, the router strips the source and destination IP and updates it to reflect its IP as the source and the next router's to be the destination. But it seems to me that if that's the...

    TJEnger5 pointsBadges:
  • Routing Entry

    How do we know Which type of routing entry we are assigining to SBS While creating  SBSD?

    qmaster1,675 pointsBadges:
  • How to find Route Active in range 192.168.128.1 -192.168.131.1?

    how to find Route Active in range 192.168.128.1 -192.168.131.1?

    Rezvan15 pointsBadges:
  • How can I load balance my router managed by two ISPs?

    I have two ISP (Internet Service Providers). How can I balance the load between them (or load balance them) using the router and take their output and send it through one Ethernet port, out to my network? It must be set up  this way because I have only one firewall (which has only one Ethernet...

    NetworkingATE1,545 pointsBadges:
  • routing of traffic between two NICs

    I have two network card on my pc one is used for company's web based applications applications configured as ip        10.132.63.168 subnet 255.255.255.224 Default Gate way 10.132.63.161 2nd Nic is used for Broadband internet connection with DSL Modem when i connect to the Broadband...

    Sdonws5 pointsBadges:
  • OSPF Routers not Sharing Routing Information

    Ive been trying to configure ospf on my home lab but they do not share routing information. Ive been trying to figure out the problem a week now but yet i cannot solve it.. Please could someone help me.. thanks.. Here is the config of my 3 routers running on frame relay Router1 router ospf 1...

    Swamier065 pointsBadges:
  • 2IPS’s, 2 routers (1 router per each ISP) connected 8 workstations through 2 L1-switches – will this work?

    2IPS's, 2 routers (1 router per each ISP, diferent LAN-subnet on each router) connected to 8 workstations (through 2 L1-switches) - will this work? (it does actually work but with disruptions)? 2 ISPs are required in case one IPS's connection is down. Thequestion is will the other ISP's connection...

    Eager2knowlan35 pointsBadges:
  • Network printing through OpenVPN

    I set up an OpenVPN server in bridged mode - using tap0 - and client both running CentOS 4.4. The VPN works perfectly, except for printing from the client LAN - 10.1.2.x/24 to the server LAN - 10.1.1.x/24. I am using a HP 1320n network printer with IP 10.1.1.100 on the server side. I can telnet to...

    Skyfly2215 pointsBadges:
  • Linux Routing Solution – with Proxy ARP/HTTP management

    Hi Guys, Does anyone know of a good Linux routing solution I need to do the following: network 1 ----> Linux router ---Network 2 ---> ISP switch However, I cannot add a route on the ISP switch due to restrictions. Im hoping proxy arp with be the solution however, I dont know much about it and...

    IronHedge360 pointsBadges:
  • how to switch the traffic inside the router?

    I have one router wich connect to two lines one is ADSL line and one is leased line and i want sone trafic to go throue the ADSL line and some of the throue the leased line but i dont know how to do this switching between the two lines.

    Mohadbazzi47170 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following