• VLSM routing protocols

    Which routing protocols support VLSM?

    Libby5 pointsBadges:
  • What is the difference between routing and routed protocols?

    What is the difference between routing and routed protocols?

    NetworkingATE1,545 pointsBadges:
  • Multiple subnets on one physical network

    I am setting up a fairly large wireless network. We have a fibre connection to the internet for a small community wireless project to give high speed to the 10-20 houses in the area. The router device is a windows PC running with two NIC cards, it is hardened down to very minimal services, with...

    Johnshoff60 pointsBadges:
  • Office LAN and WAN connection

    I have three 35 sreies switch,two 29 series and 45 series as core switch,and router which is not already connected,my intetion and qn is how will  i connect and configure those switch and router to use internet from ISP which come thru moderm to my office,and bare in mind i have ISA FILEWALL i...

    Xtchar5 pointsBadges:
  • Types of LSAs used in OSPF

    What are the different types of link-state advertisements (LSAs) that will be used in Open Shortest Path First (OSPF)?

    NetworkingATE1,545 pointsBadges:
  • VPN Tunnel Configuration in Router uses BGP Routing Protocol

    How to create VPN Tunnel in Router which uses BGP as Routing Protocol and the client side Router also using BGP as Routing Protocol. Please guide me in this.

    Ajsdaj5 pointsBadges:
  • What is the multicast IP address reserved for RIP2?

    What is the multicast IP address reserved for RIP2?

    Yasir Irfan5,550 pointsBadges:
  • Routing problem with two Windows Server 2003

    I need some help here please Scenario: Devices: Three routers and one hub; 2 servers 2003 (one with two NICs) in its own forest; and 3 Windows clients. Each router is on a different subnet (ISP and two private subnets). Note: The ISP is using broadband router, and the two private networks is using...

    Smcborrough20 pointsBadges:
  • communication between two different routing protocols

    is it possible to form adjacency between two routers running different routing protocols?

    Saurabh6chandra5 pointsBadges:
  • hub and spoke using EIGRP

    I cant ping from one spoke to another, split-horizon has been disabled, any suggestions???

    Rayb5315 pointsBadges:
  • When do I use RIP, EIGRP, IGRP AND OSPF?

    When do I use RIP, EIGRP, IGRP AND OSPF?

    NetworkingATE1,545 pointsBadges:
  • How do the protocols RFC 1483 bridge, RFC 1483 routed, RFC 2684 bridge, RFC 1483 MER and IP over ATM (IPoA) differ?

    What is the difference between RFC 1483 bridge, RFC 1483 routed, RFC 2684 bridge, IP over ATM (IPoA) and RFC 1483 MER? Why do some CPE manufacturers support all of these protocols if, for example, IPoA is an application of RFC 1483 MER?

    NetworkingATE1,545 pointsBadges:
  • Tricky EIGRP routing quesiton

    Hello Sudhanshu, I have a bit of a tricky question that I've been wondering about. I'm going to be setting up over a dozen new ASA5510s in front of preexisting 2821 routers. I currently have EIGRP running in GRE tunnels between the sites. I have heard that the ASAs do not support GRE tunnels...yet...

    Richardvoyageur40 pointsBadges:
  • best routing protocol for frame relay network

    what is the best routing protocol to use when seting up a frame relay network

    ITKE352,580 pointsBadges:
  • RIP and OSPF security

    can anybody explain to me the Routing Information Protocols and Open Shortest Path First security....how it works and how does it make sure the protocols is secured....?

    Shafa5 pointsBadges:
  • WCCP step by step setup and utilisation of Cisco Cache engine or Baracuda

    I am new to this field and would like assistance of setting up WCCP on a Router and two content engines, Baracuda and cisco Cache engine. Please help?

    Apara10 pointsBadges:
  • Will the NETGEAR WGR614 work with the D-Link DSL 320B?

    Will the NETGEAR WGR614 v9 54Mbps Broadband Wireless Router work with the d link dsl-320B.

    Matt1330 pointsBadges:
  • Router configured one hop from PC with default gateway as IP address

    What would happen and what would be the flow if I configured a PC with the default gateway as an IP address of the router that is one hop away -- that means, I have one more router in between?

    NetworkingATE1,545 pointsBadges:
  • 4 VLANS, 3 locations, 3 Routers, No communication between Lans or VLANs

    OK, here is my problem, I'm working on a project in the Test phase right now. I have 3 routers (Cisco 2811s), all running EIGRP, these are seperating 3 goegraphical regions. Each of these Routers is linked via Trunking line to a Switch which has 4 VLANs enable. According to everything I have found...

    CRagsdale32755 pointsBadges:
  • Does RIP support discontinuous networks?

    Does RIP support discontinuous networks? I configured a discontinuous network in a simulator and it works there, but I want to know if it works in the real world.

    NetworkingATE1,545 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following