• GRE Tunnel ARP entry never times out

    Sulaiman Syed,  I would like to reproduce this with just 1 or 2 router/swirch, can you provide me the simplest configuration reproduce this issue. with connection details or small topology details. Thanks in advance Umesh    

    Umeshh75 pointsBadges:
  • Dlink router – cannot connect within Intranet

    I have D-Link DSL-2640B router. I'm not able to connect through Intranet, i.e. to another IP address within LAN, from a PC within the same LAN. For example, I have activated SwiFTP server on my Android phone. To connect to it, I need to use 192.168.1.50 and port 2121 with an FTP-client. I'm unable...

    Wyxa5 pointsBadges:
  • V4R5 server performance

    i have power down my v4r5 server, and checked all the connections,also i have restarted my router and every thing. but now server performance is slow, i dont konow why? please help me....

    Rajasekhar151,395 pointsBadges:
  • Router Board RB433AH Configuration

    I have brought Mikrotik Router Board RB433AH and i was unable to link it with my Pc. I used striaght cable to connect it. My Pc can't obtain ip address. I have three cards which is already installed in it for 3 sector antenna. Please guide me so that i can start my WISP in my small locality.

    WISP5 pointsBadges:
  • Remote Access Client Access

    I have used client access for years. I had a linksys router to a westell modem model 6100. THEN Frontier came in and swapped the westell modem for a westell model 7500 which is a modem/router combo. It has been configured for port forwarding. However, it won't let me in from home. What changed and...

    ckidder235 pointsBadges:
  • configure-cisco-2811-for-ethernet-p2p

    Hello, I have to configure a Cisco 2811 router that have 2 Fast Ethernet interface, in order to have a p2p connection with my ISP. The FastEthernt /0 will be used for the p2p connection with the ISP, the FastEthernet /1 will be used to route my pubblic IP. In order to make the connection the ISP...

    Rocconeri5 pointsBadges:
  • Components and cables to design/build a network

    Hello there, I would like to design-build a network for a small company (about 80 employees). The company is divided in 3 sections which are: designers (30 employees), sales (30 employees) and administrator/marketing (15 employees). Also there are 3 managers and a CEO. What components do I need to...

    AppliedInformatics35 pointsBadges:
  • Cisco 1841,SDM will not connect nor install

    I am trying to install a VPN Server on my Cisco 1841 router. When I try to connect SDM it will not connect. I tried reinstalling the SDM on the router, but it comes to a stage & says "copy operation failed". I tried to install VPN through CLI, but the CLI doesn't recognize the CRYPTO command. Need...

    Aslamalikhan25 pointsBadges:
  • How to check the loop in Cisco router?

    i want to know to how to check whether is a loop occurred in the network? because load in tx and rx in increasing...

    Hack0505 pointsBadges:
  • problem with sharing internet in wireless network using dsl-2640u

    Hi I have D-Link dsl-2640u modem.i've connected it to my pc with cable and i can access internet but i can't access internet in wireless network.i've tried to connet with a notebook wireless I don't know what to do! help me please.

    Rapfreak5 pointsBadges:
  • Help with site to site IPsec VPN between Cisco ASA 5505 and Allied Telesys AR450s

    Hello, I am trying to get an IPsec VPN built between a Ciso ASA 5505 and an Allied Telesys AR450s, but am encountering a strange issue. Layout

    Newtmonkey5 pointsBadges:
  • cisco 2950 configuration

    Hi, I have got a really stupid question to ask. I am running a small wireless internet service, about 20 customers so far. I'm using 4 access points to send out my signal. My input is from a t1 line into a cisco 1841 router. Here is where my problem starts: I've been using soho dsl router/switch ...

    Edcockrell35 pointsBadges:
  • Accessing a Server on a different subnet

    I have a t1 line that goes into a switch, off the switch there are two routers one operating on the subnet 192.168.1.1 and the other on 192.168.0.1. Both routers have individual static ip addresses. I have a ReadyNAS storage device on 192.168.1.100. I want to be able to access the server from both...

    Admccurdy5 pointsBadges:
  • Private IPv6

    Does IPv6 have private address such as IPv4's 10.0.0.0 or 192.168.0.0? Or is there a way to get an IPv6 address and roll back to a private IPv4 address on a Router?

    Grimm085 pointsBadges:
  • Can I use Windows server 2008 as a router?

    Can I use a Windows server 2008 as a router and a DHCP relay server? If so how?

    Troubleshooter24755 pointsBadges:
  • how to get into router, previous tech did not leave password.

    hi all, I just took place of last I.T. tech on new job, the previous tech did not leave the correct u/n and p/w how do I go about getting into switch and routers (cant do hard reset these machines are live) another issue they built exchange server on a partition, what will I have to do to get more...

    Arcolino20 pointsBadges:
  • Loop is seen on router but line protocol is down

    Loop is seen on router but line protocol is down, where could be the issue?

    Rohanpatil8885 pointsBadges:
  • Routers for cable connection with print sharing.

    We want to connect 2 computers thru one cable connection. My concern is that 1) it will slow the connection down so much as to make on line gamming difficult, 2) our cable modem is very very very old but reliable and 3) security. Routers have come a long way in security features but will adding...

    JAMNTHIS10 pointsBadges:
  • configuring L3 switch to router

    I have router having public address in F0/1 and S0/0 I have no firewall, Hence i am connecting Cisco 3560 Switch directly to the router. but i am anable to ping from my local vlans to the S0/0 I tried Nat and all the thing by switch port and no switch port commands. Every thing i tried. I i come...

    Ekansh400 pointsBadges:
  • difference of IP and IPX

    What is the difference between IP and IPX routed rotocols?particularly in their protocol stack and addressing scheme??

    Sano5 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following