• Can this be a hardware problem?

    There's this PC which reliably connects to the internet via the network, but does not reliably connect to the network itself. IPCONFIG /RELEASE, then /RENEW and /ALL indicate that the setup is correct. The cable disconnected icon never appears, but I tried a different cable anyway. I found I could...

    BillBald0 pointsBadges:
  • How to configure Linksys Router & PIX 501 for home broadband network

    Hi networking gurus, I have a Linksys AG241 - ADSL2 Gateway with 4-Port Switch at home connected to my ADSL provider using PPPoA. This all works fine. I have recently purchased a Cisco PIX 501 firewall. I have connected the PIX to the Linksys router, but I can?t get traffic flowing properly. The...

    GregNottage0 pointsBadges:
  • Blocking music on internet connection

    Hi all, I have some internet users who listen to online radio stations. I have asked them not to do it, as I feel like it probably uses up a fair amount of bandwidth. Is this correct, or does it use very little? Also, other than purchasing and installing software, is there a way to block music?...

    TheVyrys0 pointsBadges:
  • T1 vs T3 vs 2 T1’s

    I currently have two offices that will become one big office. There will be at most 150 users. Each office currently has a T1 and we do not really have any problems since we also use a Packeteer Packetshaper. If someone wanted to increase the pipe, would they go from a T1 to a T3 or is that over...

    Kevins740 pointsBadges:
  • deploying office 2003

    I want to Look at problems in deploying office 2003 in terminal server environments and get user experiences on aspects like performance

    Eduado0 pointsBadges:
  • DDos traffic generator

    Hi all, We are testing SERVICE CONTROL ENGINE of Cisco. I would like to test the SCE for detecting and preventing DDOS traffic. For testing SCE, I need DDOS traffic generator software. I searched in the Google but i didn't get. Can anybody help me to find out a DDOS traffic generator software. Can...

    Mraj270 pointsBadges:
  • keepalive

    HI, I am preparing for the ccna exam. Can any body help me, what is the purpose of keepalive command which we will give in routers when configurin the physical interfaces. Thanks & Regards, Rajesh.M

    Mraj270 pointsBadges:
  • InterVLAN Communication…

    Hii everybody, I am new in networking field, i am working as network administrator, can anybody please tell me how to add one host in more than one VLAN, so that he can could communicate with both VLAN users... the switches are 2900 series. its urgent Thanks in advance

    Balasaheb0 pointsBadges:
  • Switch is interupting and not working

    Hi every body i have a problem in my network when i m giving power to swtich and starting my network after few minutes my clients are not able to use internet so after that i off the power of both swiches and after a moment i give them power again they working and after some time (some times after...

    Atharsiyal25 pointsBadges:
  • D-Link router can not be seen on the network

    We have a wireless D-Link router on our network, which we want to configure as an access point to our server. The server can see all users except those connect through the wireless router. How do I set the router to be seen by the server? Is there a way I can set the router as an wireless access...

    LadyInfoTech0 pointsBadges:
  • Can Japanese XP Pro work w/Exchange 2003

    I setup Exchange 2003, mixed mode, to support 9 workstations and the server. During the install process, 3 workstations were identified for Japanese use. Management had purchased 3 new XP Pro Japanese CPUs. Further instruction was to use MSOffice Outlook 2000 but allow users access to SHard...

    DaihatzuDude0 pointsBadges:
  • Blocking Music on Internet connection

    Hi all, I have some internet users who listen to online radio stations. I have asked them not to do it, as I feel like it probably uses up a fair amount of bandwidth. Is this correct, or does is use very little? Also, other than purchasing and installing software, is there a way to block music?...

    TheVyrys0 pointsBadges:
  • Access point/router

    I would really like to know the detailed difference between a router and an access point. Do I need access points if i am going to set up a network and have two routers already? How can i use a router as an access point if that's possible? Please explain. Thanks

    Frenyb0 pointsBadges:
  • Servers preventing NEW connections from remote clients

    Hey all, I have an interesting problem and hope that someone can help resolve it. At the minimum, I have to reboot one or more of my servers at the main site because all of my remote users located across a direct T1/VPN tunnel can no longer get connections to the server with the exception of being...

    Swiftd0 pointsBadges:
  • Reg. POP3 Service….

    Hii Everybody, I have installed Active dir. with win server 2003 and Exchange server, in my home PC for practice purpose using loopback adaptor.... My problem is that using microsoft webmail i am able to send and receive the mails, but using Outlook express i can not..... i checked POP3 and SMTP...

    Balasaheb0 pointsBadges:
  • Microsoft exchange 2003

    Hi guys, i just got a contract in a new company tha wants to start using microsoft exchange 2003. could you kindly explain how to go about cinstalling and configuring their network for exchange. thank you

    Bornvee0 pointsBadges:
  • VLANS

    Hi guys, cold anyone please explain what VLANS are and how and when to implement it in a network. Thank You

    Bornvee0 pointsBadges:
  • Cisco Newbie

    Hello, I have a Cisco 1721 as my Internet router. It is configured with access-lists to pre-filter Internet traffic,and NAT. I need to setup MUPVN on a Firebox Soho6tc, but need to first allow the traffic through the Cisco router. What protocols and ports need to be open on the Cisco router to...

    Manthax0 pointsBadges:
  • Domain Admin Group

    Does anybody know of a way to search our Active Directory to see what users are part of the Domain Admins Group. If so, what software and where do I get it. Thanks

    Vman660 pointsBadges:
  • Pix Question

    have a PIX 501 that creates a VPN tunnel direct to our home site. right now we have another company that rents space from us and wants to use our DSL line (our needs are low when the renters are there and we are talking 1-2 pcs max.) my question is can you create a second VPN tunnel to the renters...

    Richl010 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following