• Placement of router

    Where is the best place to put the router? Example: Open, high, or just what works the best?

    MIA125 pointsBadges:
  • Linksys WVC54GCA cannot connect up with 2Wire Router

    I was using my Linksys WVC54GCA wireless-G Internet Home Monitoring Camera, with my NetgearDG834PN ADSL Modem Wireless Router without any problem. When I upgrade my line to Singtel MIO Home, I was provided with a 2WIRE 2701HGV-E. Wireless connection for my PC/laptop have no problem. However, I am...

    Phlim35 pointsBadges:
  • Does the D-Link DSL-504T 4 Port ADSL/Modem Router work with a d link modem

    Does the D-Link DSL-504T 4 Port ADSL/Modem Router work with a D-link modem?

    Matt1330 pointsBadges:
  • Adding VPN pass through a SOHO router

    What should I do if I need to add VPN pass through function to a SOHO router?

    ITKE54,715 pointsBadges:
  • cisco 2811 with 2 fast ethernet ports and 4 vlans-2

    I need urgent help on this. I have a brand new cisco 2811 with 2 FE ports. The port f0/0 is connected to the internet and the f0/1 will be connected to the switch which has 4 vlans configured on it. I have no idea how to go about doing this. Can someone please help me with the configuration on the...

    Sarfarazkz0 pointsBadges:
  • I want to upgrade my IOS Router 7507. but min flash IOS new version require 32 M.

    A question submitted on SearchNetworking.com I'm want Upgrade IOS Router 7507. but min flash IOS new version require 32 M. cisco RSP8 (R7000) processor with 262144K/8216K bytes of memory. 46976K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes). 16384K bytes of Flash internal SIMM (Sector...

    ITKE54,715 pointsBadges:
  • Configuring VLANs

    Hello All; If I'm configuring multiple VLANs on a Layer 3 switch (HP) do I have to setup static routes or will the switch learn them automatically? Also if I have multiple VlAN's on the Layer 2 switches that connect to the Layer 3 do I have to setup port trunking in order for traffic to be able to...

    Drainey0 pointsBadges:
  • What is a router?

    what is a router

    Williams355 pointsBadges:
  • Cisco 3745 and amd_flash_cmd errors

    I have recieved about 30 Cisco 3745 Routers. I have loaded the 12.3.8.5T Enterprise Plus BIN image on them. Most of them work, but there are a few where the engine boards are bad and some where they work but I am getting amd_flash_cmd errors. I have swapped out the flash memeory and NVRAM. In...

    Eyereadyouremail0 pointsBadges:
  • What does “DB” mean, in DB-9 serial port?

    Posted on behalf of Ben: What does "DB" mean, in DB-9 serial port?

    Margaret Rouse1,185 pointsBadges:
  • Can’t ping servers in our school division after adding cisco 891 routers

    I am currently moving our school network from a flat network to a routed network. There used to be only one DHCP server at the central office that was handing out IP addresses for the entire school division network. The IP range was 172.16.x.x. A router is being added at each site and each site...

    Skenny175 pointsBadges:
  • connecting the 5th and 7th floosr of a building

    Hi, Everybody My network covers the 5 th floor of an office building, and now we expanding to the 7th floor (a half-dozen users. All the servers and telecom closet are on the 5th floor and I have to provide network services to the users on the 7th floor. I would like to have the opunion of this...

    Senomango0 pointsBadges:
  • turning off the wireless broadcast

    Can I use my netgear 300n as a wired router without having the wireless function?

    Lostsignalplease5 pointsBadges:
  • RIP Protocol

    I need to enable RIP on R1 & R2 to route for 192.168.1.0/24, on R2 configure default route to forward unknown destinations to ISP, on R2 propagate the default route to R1, on ISP configure a single static route the 192.168.1.0/24 network pointing to R2, configure RIP so that the routing updates are...

    Chowdog115 pointsBadges:
  • what is the difference between hub and router and why is it necessary to utilize a hub when creating a network

    what is the difference between hub and router and why is it necessary to utilize a hub when creating a network

    Molefi0 pointsBadges:
  • AMD Sempron

    Hi all, I have one desktop running on AMD sempron 2200. In my home network. It?s clock speed is 1.5 GHz as per manufacture?s specification. but in system properties It showing only 800 MHz. OS is using XP SP2. But it working very smoothly. Anybody have any idea about why it likes this?

    Squibc40 pointsBadges:
  • Cisco vs HP

    I have read a lot about the debate between Cisco and HP switches. In what use cases does going with the HP product make a lot of sense and how much of Cisco's installed base is realistically at risk? What are the primary factors that sway decision makers one way or the other?

    Gcc5 pointsBadges:
  • GRE Tunnel ARP entry never times out

    Sulaiman Syed,  I would like to reproduce this with just 1 or 2 router/swirch, can you provide me the simplest configuration reproduce this issue. with connection details or small topology details. Thanks in advance Umesh    

    Umeshh75 pointsBadges:
  • Dlink router – cannot connect within Intranet

    I have D-Link DSL-2640B router. I'm not able to connect through Intranet, i.e. to another IP address within LAN, from a PC within the same LAN. For example, I have activated SwiFTP server on my Android phone. To connect to it, I need to use 192.168.1.50 and port 2121 with an FTP-client. I'm unable...

    Wyxa5 pointsBadges:
  • V4R5 server performance

    i have power down my v4r5 server, and checked all the connections,also i have restarted my router and every thing. but now server performance is slow, i dont konow why? please help me....

    Rajasekhar151,395 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following