• how to configure your cisco router to dial remote server has isdn modem

    hi : i have 2811 cisco router with bri interface , and i want to know away to make this router call remote server has isdn modem , but all the ways didnot works , can any one help me with that and i;ll be thankfull plz

    Pcangel10 pointsBadges:
  • How a router helps in delivering and connecting two networks at different places

    How does a router help in delivering and connecting two networks at different places, say for example one sends some data from India to a friend in the USA and they are working on different machines: one is working on a PC machine and the other on a MAC machine?

    NetworkingATE1,545 pointsBadges:
  • Fixing a corrupted file

    I have a 2801 router, but the Nvram file is corrupted. When we try to copy the Running config is not working. The command I use is the following: copy running-config startup-config The error says it cannot save it. I don't know what's wrong. What should I do? Do I need to download the new IOS in...

    NetworkingATE1,545 pointsBadges:
  • Can I do load balancing with redundancy?

    I have two links with different ISPs, and both links (512Kbps) are terminated on separate Cisco routers (2811). Currently, we are using one link, and another link is new. I want to do load sharing and redundancy between them. Right now I am not using BGP (routers are configured in simple manner)....

    NetworkingATE1,545 pointsBadges:
  • Configuring a Netgear Layer 3 switch as a router

    I just bought a Netgear Layer 3 GSM7324 Switch. We are paying for collocation services at a Datacenter. We need to configure this switch as a router since we are going to connect servers with public IP's direclty to the switch. We contracted a 1Gbps port and the collocation facility is providing...

    Mlev113011300 pointsBadges:
  • how to write telnet script

    I need to perform routine router administration from an Linux pc. How can I create a script to logon and perform some CLI automatically?

    Lazythegreat15 pointsBadges:
  • Dynamic updates to a DNS Server

    What Windows Operating Systems support dynamic updates to a DNS Server? Which service needs to be running on the clients?

    1111100 pointsBadges:
  • What is NAT port forwarding?

    Describe in brief how you would set up port forwarding on a NAT router to allow a PC on the LAN to publish its web to the internet.

    1111100 pointsBadges:
  • DHCP relay Agent in DELL switches

    I have windows 2003 servers and Dell 62XX series switches (level 3 switches) and Vlans. As I understand in order for a computer to be able to receieve an IP Address via dhcp I need relay agent. This series of switches supports DHCP Relay my question is how would i assign computer to a specific...

    Dimchik0 pointsBadges:
  • Black Hole Routing Issues

    Original Symptoms Started very suddenly, one morning we came in to find: • Outbound Exchange mail queue building (inbound ok). • Some inbound users not able to access our external services, depending on where they were trying to connect from, connecting but timing out on web, terminal server...

    KevWay5 pointsBadges:
  • Static ip setup advice

    Hi, Im new to this side of things so any help appreciated..:) The router i have is a 3com Office connect adsl modem/router 3crwdr200a-75. My isp provides me with 5 static ip address`s and what i would like to do is route some of these ip address`s to different pc`s i have so that i can run a ftp...

    Welshone30 pointsBadges:
  • WAN analyzer shows misaligned frame errors

    I have setup a frame-relay connection between two nodes A and B using two routers and a third router configured as a frame-relay switch. I have connected a WAN analyzer between the router of node A and frame-relay switch. My WAN analyzer shows Misaligned Frame errors (though they are very small)....

    NetworkingATE1,545 pointsBadges:
  • Regarding QoS

    i've just bought edimax br-6204wg-wireless router what i'm desperately trying to do is: set a minimum bandwidth for 1 ip in lan and leave the rest to the others i've set up a rule a dowload rate of 512 kbs from any remote port and ip on tcp i save the rule,eveything ok when i enable QoS eveything...

    Torturedsoul35 pointsBadges:
  • 2 Routers on the same Network

    Hi I'm connecting two linksys wireless G routers on the same network. but of course that's crashing my network. What is the best way to configure router one which is getting the internet line and I want router 2 to get internet from router 1. I'm trying to use router two as a repeater of router 1....

    OMAR50 pointsBadges:
  • Route betwwen two network

    I have linksys router BEFSX41 and i want to route between two network . i already creat static route as follow: Dest. Ip : 192.168.1.0 MASK: 255.255.255.0 Getway: 192.168.2.1 Hop Count : 0 Interfcase LAN from network 192.168.1.0 /24 trying to ping destination host unrechable how i should do that?...

    Ghasttas5 pointsBadges:
  • routing between vlans

    on layer 3 switch (3com 4900).. I added 3 ip interfaces,one interface defined for each vlan with difrenet subnet. without enabling any routing protocol ,I achieved a communicattion between two pc's that belong to diferent vlans . is there any internal routing between the ip interfaces on layer3...

    Agipnet0 pointsBadges:
  • Firewall Router

    I have a Linksys Firewall router (BEFSX41) ? Does anyone know if this supports NAT-T. I have two users who need VPN but can't. Anyone know the settings required on the router?

    Ron11535 pointsBadges:
  • Limiting bandwidth for streaming online audio/video

    We have a T1 that was overcrowded by streaming radios,videos youtube, etc. as soon as we installed a fancy new 3Com Baseline Plus Switch with QoS. It was giving higher priority on the parasyte traffic (video/radio) than the legit (http/ftp). We also have a couple of IP Phones that we hardly use. Is...

    Patzo65 pointsBadges:
  • router security

    i have a 3com office connect router im trying to get security every thing i try IT NOT WORKING CN SOME ONE HELP ME PLEASE

    Liamrox1325 pointsBadges:
  • Help configuring Linkys wireless router with Paradyne ADSL modem, its fine with modem but with wireless router I cannot access network.

    Help configuring Linkys wireless router with Paradyne ADSL modem, its fine with modem but with wireless router I cannot access network.

    SAPFAQ1 197535 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

Thanks! We'll email you when relevant content is added and updated.

Following