• WAN analyzer shows misaligned frame errors

    I have setup a frame-relay connection between two nodes A and B using two routers and a third router configured as a frame-relay switch. I have connected a WAN analyzer between the router of node A and frame-relay switch. My WAN analyzer shows Misaligned Frame errors (though they are very small)....

    NetworkingATE1,545 pointsBadges:
  • Regarding QoS

    i've just bought edimax br-6204wg-wireless router what i'm desperately trying to do is: set a minimum bandwidth for 1 ip in lan and leave the rest to the others i've set up a rule a dowload rate of 512 kbs from any remote port and ip on tcp i save the rule,eveything ok when i enable QoS eveything...

    Torturedsoul35 pointsBadges:
  • 2 Routers on the same Network

    Hi I'm connecting two linksys wireless G routers on the same network. but of course that's crashing my network. What is the best way to configure router one which is getting the internet line and I want router 2 to get internet from router 1. I'm trying to use router two as a repeater of router 1....

    OMAR50 pointsBadges:
  • Route betwwen two network

    I have linksys router BEFSX41 and i want to route between two network . i already creat static route as follow: Dest. Ip : 192.168.1.0 MASK: 255.255.255.0 Getway: 192.168.2.1 Hop Count : 0 Interfcase LAN from network 192.168.1.0 /24 trying to ping destination host unrechable how i should do that?...

    Ghasttas5 pointsBadges:
  • routing between vlans

    on layer 3 switch (3com 4900).. I added 3 ip interfaces,one interface defined for each vlan with difrenet subnet. without enabling any routing protocol ,I achieved a communicattion between two pc's that belong to diferent vlans . is there any internal routing between the ip interfaces on layer3...

    Agipnet0 pointsBadges:
  • Firewall Router

    I have a Linksys Firewall router (BEFSX41) ? Does anyone know if this supports NAT-T. I have two users who need VPN but can't. Anyone know the settings required on the router?

    Ron11535 pointsBadges:
  • Limiting bandwidth for streaming online audio/video

    We have a T1 that was overcrowded by streaming radios,videos youtube, etc. as soon as we installed a fancy new 3Com Baseline Plus Switch with QoS. It was giving higher priority on the parasyte traffic (video/radio) than the legit (http/ftp). We also have a couple of IP Phones that we hardly use. Is...

    Patzo65 pointsBadges:
  • router security

    i have a 3com office connect router im trying to get security every thing i try IT NOT WORKING CN SOME ONE HELP ME PLEASE

    Liamrox1325 pointsBadges:
  • Help configuring Linkys wireless router with Paradyne ADSL modem, its fine with modem but with wireless router I cannot access network.

    Help configuring Linkys wireless router with Paradyne ADSL modem, its fine with modem but with wireless router I cannot access network.

    SAPFAQ1 197535 pointsBadges:
  • Linksys wireless-n router with VPN

    Linksys says that I cannot access the wireless Access Point

    Miguelwpratt5 pointsBadges:
  • Problem:The client could not connect to the remote computer

    When connecting to the application server several times it gives an error as in the subject and then after a few trials it goes through. Intermittent failures on connection. when trying to join domain i failed with errors indicating that DNS was not resolving the domain name. Or Domain name server...

    Eduado0 pointsBadges:
  • Sharing an Internet Connection

    The question title is obvious: I want to share my high speed internet connection. I have the following: 1 - Sierra Wireless AirCard 595U 1 - LinkSys WRT54GS Router (wired and wireless capable) 1 - Wireless-capable Dell Latitude D810 laptop w/ XP PRO SP2 and all updates 1 - Self-built...

    DimeonS25 pointsBadges:
  • Connection between two hubs 3com and Linksys

    I need some help in regards "Connection between two hubs, 3com OfficeConnect 3C16792 and a Wireless Linksys WRT54G". In our existing office block on the bottom floor we use the 3com officeconnect for all our network connections. We bought the top floor of the building also out and all the managers...

    Wgvosloo5 pointsBadges:
  • differences in network devices-reg

    I want to know the differences between a router, a hub and a switch. I know that these devices operate in diferent layers of the OSI model. I want to know other differences like hardware related to each device, security,number of devices that each can support etc.

    Bharathkumark0 pointsBadges:
  • rply soon

    plz tell me whether MAC adress is globally unique or not....... also tell me what is true.. PUBLIC ip adresss r globally uniuqe" or "ip adress are unique. also tell me in which part of world IPV6 is now used in majority?????

    Jaanjaan0 pointsBadges:
  • Netwroking CD drives together

    I am manager of a small chain of gaming centers in NC. The store I run is having issues with installing some of the games on our PC's. I am looking to network the cd drives together so that if someone is on station 6 and the game is on station 1 then they can still play the game on station 6. Any...

    Darkstryder0 pointsBadges:
  • bind 3rd ip in fast ethernet

    I want to baind one more ip in fastether nat i have baind allready two ips i want one more how can i baind one more ip in router cisco 1700 series routher

    Prasad.parle5 pointsBadges:
  • lease line problem.

    we are putting 2mbps lease line.we using the tellabs modem(8110) and putting line inside it,the line one light blink and make a connectivity,but when we send audio from another place what can be the problem ,which creating the problem.we are not using the router ,what can be the connection...

    Vivek gaur7865 pointsBadges:
  • Routing between two networks.

    Hello all! I am a small business owner with a fair amount of IT skills, but I need help. My business and the business next to us (we phyically share the same building) are attempting to connect our two networks for point of sale usage. Since we are open to each others stores, and our sales staff...

    CelestialMechanic5 pointsBadges:
  • Cisco 1751 V Router

    My 1751 V Router seems to be in an endless loop during the boot-up process an I get the following errors. How do I breake out of this. I have tried Ctrl-Break during the decompression of the .cfg but the router remains in the loop. I Just would like to get it back to the factory default stage....

    GoatRoper0 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following