• Central Router to assign the same IP address to the VPN Clients

    i have several PCs connecting to a central site router using the VPN Client and different media (DSL, ISDN, UMTS). I would like the central router to assign the same IP address to the VPN clients each time they connect again to the central site. So far I have an IP pool configured on the central...

    ITKE407,620 pointsBadges:
  • Can I use a Linksys BEFSR41 as a hub connected to a Linksys WRT150N?

    I have replaced my BEFSR41 VER 3 with a WRT150N. Can I use the BEFSR41 as a hub connected to the 150N?

    Grntech5 pointsBadges:
  • Need help with small wireless network

    if i have a wireless N router and i want to hook up a desktop at the other end of the house up with a network adapter do i need an N adapter or can i use a G?

    Raremold201010 pointsBadges:
  • How to connect a server using DSL routers

    My company is having 30 users at different different location all of them is having separete DSL routers with a VPN tunnel ... And i wanted to connect them to the main server and create a active directory to deny using the cdrom,startmenu, flash drive, games and etc they should only use the company...

    Sufisnetwork5 pointsBadges:
  • Need help with VLAN configuration

    I have a router connected with Fast Ethernet to switch in VTP Server Mode (containing 2 VLANs) and then connected to a switch in transparent mode with three VLANs and after it a single switch in client mode. All these switches belong to the same domain and I have done interVLAN routing in it and...

    NetworkingATE1,545 pointsBadges:
  • Switching ISPs and need help reconfiguring VPN and Firewall settings

    When switching from DSL to Cable Internet... when you have a router w/VPN & Firewall and a static IP - how do you switch the service? Obviously just plugging the new service provider in won't work. I know you need the log in and password to the router but after that?

    NetworkingATE1,545 pointsBadges:
  • 4 VLANS, 3 locations, 3 Routers, No communication between Lans or VLANs

    OK, here is my problem, I'm working on a project in the Test phase right now. I have 3 routers (Cisco 2811s), all running EIGRP, these are seperating 3 goegraphical regions. Each of these Routers is linked via Trunking line to a Switch which has 4 VLANs enable. According to everything I have found...

    CRagsdale32755 pointsBadges:
  • Configuring Cisco 1700 with Cyberoam box

    This is regarding the Cisco 1700 series router, which has been configured by some other experts. We are now having a lease line and the Cisco router connected with Cyberoam box. Earlier we had an ADSL connection, so I had direct IP where there was no need to logging into Cyberoam everytime. But...

    NetworkingATE1,545 pointsBadges:
  • How does one setup a Windows 2003 Enterprise Server on one machine with 2 nics?

    I have read a book (O'Reily) on setting up windows server 2003 and at my current job I am fortunate enough to be able to work/play with their servers which are also windows 2003. In this, I have a bit of experience, however I ran into a few problems when trying to setup my own personal network at...

    Pr0970 pointsBadges:
  • Does RIP support discontinuous networks?

    Does RIP support discontinuous networks? I configured a discontinuous network in a simulator and it works there, but I want to know if it works in the real world.

    NetworkingATE1,545 pointsBadges:
  • How to add a subinterface in Cisco 2811 router

    how to add a subinterface in router 2811

    Fsheb5 pointsBadges:
  • Is AES the best encryption for enterprise routers

    Is AES the best encryption for enterprise routers? How many letters& alpha numberic keys need for AES password?

    Spock12035 pointsBadges:
  • Cisco 2811 router with Ethernet access to MPLS

    Can a Cisco 2811 router support a 40Mbps MPLS connection using Fast Ethernet access?

    Webonauta15 pointsBadges:
  • Router configuration – Invalid input message configuring EIGRP

    I enter the following command to configure eigrp using a wildcard mask, and I get the output "invalid input detected at" under the first character of the wildcard mask. This same command works on all other routers in the network. The command seems correct? Why this router? R2(config)#router eigrp...

    Ytechie5 pointsBadges:
  • Static IP in scope

    does it matter if a static LAN ip is included in a routers DHCP scope? lets say routers scope is 50-100 and my static LAN ip is in that range?

    Unclebunkiefromhell5 pointsBadges:
  • VPN Tunnel

    Hello. This is my current setup. Main office has several servers (usual web, ftp, exchange, dns) which is using an RV042 router for the network. At the remote office, I have a Netgear FVS318v3 router that is maintaining the VPN tunnel back to the main office. I can't narrow down the problem. I...

    rcraig11420 pointsBadges:
  • Bridge vs router

    what are key differences between a bridge & router? I know that a bridge connect between WAN network and a router connect PC within a network. What else should I know?

    Spock12035 pointsBadges:
  • Need your help to connect remote sites

    I have 4 cisco 800 routers i have configured with NAT and DHCP and they are all connected to the internet via satellite. I have a database server that i want remote sites to access it has an ip 192.168.0.2. All the four LAN'S are on the network 192.168.0.0 255.255.255.0 and they are behind a public...

    Kenweed5 pointsBadges:
  • 5 Clinics on 1 WAN

    I need to set up 5 clinics on one WAN, allowing them to share same server for email, talk directly with doctors at other locations, on central network to access client information, they have a data exchange of 1.5MB/second at any given time, the architecture is Windows 2003 with a fiber-optic...

    Mzbattle5 pointsBadges:
  • Configure 2 lease line on Same router 2811

    Hi All, Currently we are having 1 lease line in our office and soon we are going to have another lease line as backup from other service provider,now the thing is if the provider of the lease line is same then it will be very easy for mr to configure it becoz of same publice ip..but now it becomes...

    Deveshbais10 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following