• Switching ISPs and need help reconfiguring VPN and Firewall settings

    When switching from DSL to Cable Internet... when you have a router w/VPN & Firewall and a static IP - how do you switch the service? Obviously just plugging the new service provider in won't work. I know you need the log in and password to the router but after that?

    NetworkingATE1,545 pointsBadges:
  • 4 VLANS, 3 locations, 3 Routers, No communication between Lans or VLANs

    OK, here is my problem, I'm working on a project in the Test phase right now. I have 3 routers (Cisco 2811s), all running EIGRP, these are seperating 3 goegraphical regions. Each of these Routers is linked via Trunking line to a Switch which has 4 VLANs enable. According to everything I have found...

    CRagsdale32755 pointsBadges:
  • Configuring Cisco 1700 with Cyberoam box

    This is regarding the Cisco 1700 series router, which has been configured by some other experts. We are now having a lease line and the Cisco router connected with Cyberoam box. Earlier we had an ADSL connection, so I had direct IP where there was no need to logging into Cyberoam everytime. But...

    NetworkingATE1,545 pointsBadges:
  • Creating a Trust between two networks on two routers on same floor

    I have two networks -- the first is 192.168.1.1/24 and the other is 192.168.33.1/24. Each network has it own DSL modem/router for Internet connection and are Windows domains (diffrent domain names). The two routers are physically near (50cm) and the two networks are sharing the same floor. I need...

    NetworkingATE1,545 pointsBadges:
  • How to configure SIP server in Cisco 3660 router?

    I'm not able to configure SIP server in Cisco 3660 router (IOS is 12.4T). Can anyone please tell me how? Thank you.

    NetworkingATE1,545 pointsBadges:
  • DSL router and Print Server with 8 PCs and 3 printers / hardware question

    i have about 5 pc's at home for my wife and family (5 of us) and we all use the computers daily. compaq, dell, desktop and laptop. i have one cannon printer mp3000 color printer. we plan on buying two more new printer. we currently have bellsout/att dsl service. i have a d-link four port router(we...

    Mrlarsh5 pointsBadges:
  • Router configuration is not saving in Cisco 2800 router

    i connect the 2800 do the configuration.once the router is restrated router is going to rom mode.the router configuratoin not saveing.

    Venuchennu5 pointsBadges:
  • How can I use DHCP with excluded-address?

    how can i use dhcp with excluded-address?

    1200710 pointsBadges:
  • How does one setup a Windows 2003 Enterprise Server on one machine with 2 nics?

    I have read a book (O'Reily) on setting up windows server 2003 and at my current job I am fortunate enough to be able to work/play with their servers which are also windows 2003. In this, I have a bit of experience, however I ran into a few problems when trying to setup my own personal network at...

    Pr0970 pointsBadges:
  • Does RIP support discontinuous networks?

    Does RIP support discontinuous networks? I configured a discontinuous network in a simulator and it works there, but I want to know if it works in the real world.

    NetworkingATE1,545 pointsBadges:
  • How to add a subinterface in Cisco 2811 router

    how to add a subinterface in router 2811

    Fsheb5 pointsBadges:
  • Is AES the best encryption for enterprise routers

    Is AES the best encryption for enterprise routers? How many letters& alpha numberic keys need for AES password?

    Spock12035 pointsBadges:
  • Linksys router issue

    We are a small organization using Linksys WRT54G wireless routers in a section of our offices. One router will not accept a change from WEP to WPA2. Attempts to update the firmware (in the hopes that this would resolve the issue) fail both from the external updater and from within the router...

    Pressler29042,190 pointsBadges:
  • Using switch or router ACL to block streaming traffic

    I would like to block streaming media requests using either the LAN switch or the site edge router. The site is on a private network and does not have a local firewall at the edge. Has anyone used Cisco ACL's for this purpose and if so, how did you do it? Or, would I be better implementing a...

    Labnuke9932,960 pointsBadges:
  • Getting it all to work together – Network design

    l am setting up a very basic network but still need to be reassured, my network consists of all the following which should all be used 6 computers 24 port switch 24 port pathcpanel router modem one storage rack the only pice that has put me off is the patch panel as l honestly and embarrasingly...

    clivaldo10 pointsBadges:
  • Cisco 2811 router with Ethernet access to MPLS

    Can a Cisco 2811 router support a 40Mbps MPLS connection using Fast Ethernet access?

    Webonauta15 pointsBadges:
  • Router configuration – Invalid input message configuring EIGRP

    I enter the following command to configure eigrp using a wildcard mask, and I get the output "invalid input detected at" under the first character of the wildcard mask. This same command works on all other routers in the network. The command seems correct? Why this router? R2(config)#router eigrp...

    Ytechie5 pointsBadges:
  • Wireless network lease change rate

    How do I set a wireless network lease change rate to be longer?

    Eliaswharton5 pointsBadges:
  • Static IP in scope

    does it matter if a static LAN ip is included in a routers DHCP scope? lets say routers scope is 50-100 and my static LAN ip is in that range?

    Unclebunkiefromhell5 pointsBadges:
  • VPN Tunnel

    Hello. This is my current setup. Main office has several servers (usual web, ftp, exchange, dns) which is using an RV042 router for the network. At the remote office, I have a Netgear FVS318v3 router that is maintaining the VPN tunnel back to the main office. I can't narrow down the problem. I...

    rcraig11420 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following