• How to network VLANs together

    What can be done for different VLANs to communicate including a router in a network, i.e., the commands when configuring on a router?

    NetworkingATE1,545 pointsBadges:
  • SSH configuration on Cisco router

    Please provide me a step to step detail configuration of SSH. Thanks..

    Vinesh123480 pointsBadges:
  • wireless roaming howto

    I have 3 routers (2 trendnet, dlink) one of trendnet (192.168.100) is connected to my proxy server and i want the other 2 acts as access point and do roaming. I did a setup using same ssid, differents channels but i can't ping to 192.168.10.100 (proxy connected ). What else should i do? Thanks in...

    Tics5 pointsBadges:
  • Bandwidth and Connection Speed

    I have a question regarding bandwidth and connection speed. I know that bandwidth is provided by the ISP Service but I wanted to know that the does the wireless or wired NIC card in our computer uses the bandwidth provided by ISP to connect to the basestation(Router) or the connection speed between...

    Fahad135 pointsBadges:
  • bandwidth manager

    I have a linsys wireless router. Model No.WRT54GR Some of the users are abusing the bandwidth making it difficult for others to surf the internet. Is there any way to set limits to each user so that nobody ends up using too much of the internet.The router is attached to a pc and serve as gateway.

    Chawal5 pointsBadges:
  • cisco router 1841

    how to install and connect, cisco router 1841 to pc desktop.? how would i know if it is connected.?

    Dustinlr5 pointsBadges:
  • wireless internet

    I have a router connect to the internet and a directional outdoor antenna of range up to 8km. I have another router in another building about 200m away from the first. I actually want the set up and effective wireless network with the second router in that building. Can i connect the two routers...

    Frenyb0 pointsBadges:
  • what is meant by flapping Cisco 2800 router

    we have cisco 2800 series router,L3 catalyst 3750 series and watchguard (firewall) and that is connect to L2 switches. But when we connect to router flapping occurs, now we connected to firewall it works fine. please rectify this problem

    285210 pointsBadges:
  • split static ips between different machines

    I am on a cable connection wiht a 5port switch and a router (wgr614v7) I have my router attached to the switch pulling a DHCP lease from ISP, which runs the majority of my house), and my server is connected to the switch pulling 5 statics off one of the three nics installed. one nic is disabled,...

    Pur3vil5 pointsBadges:
  • How to configure inter vlan routing on a router, vlans on two cisco switches, creating a trunk between two cisco switches attached to a router on each

    I have a scheme of two switches connected to each other, three routers, one router is connected to a switch and two routers are connected two another switch. How I'm i supposed to configure vlanX, vlanY on two different switches and trunking between them, inter.vlan routing on a router and trunking...

    MossIT5 pointsBadges:
  • how do i check part number for cisco 2821

    router 2821

    Ha25 pointsBadges:
  • Router Disconnection

    I work in an office park and our office has a cable model from our internet service provider and a Netgear router with 4 ports. Three computers and one additional router connect to our main router. The office next door is only open on Fridays and every Friday, our internet connection continuously...

    Lmg5 pointsBadges:
  • Layer 2 vs. Layer 3 generic routing encapsulation (GRE)

    What is the difference between Layer 2 GRE and Layer 3 GRE?

    NetworkingATE1,545 pointsBadges:
  • How to boost the signal on a Netgear Wireless-N router?

    I have installed a Netgear Wireless-N router in my church and it works fine for the laptop computer across the hall. However, the computer 100-200 feet away cannot access the Internet. How can I boost the wireless signal so that the computer down the hall can connect?

    NetworkingATE1,545 pointsBadges:
  • Locking the IP address to the MAC address

    Hi all.... Aim: Ip address lets say 10.0.0.1 when assigned to a particular MAC let it be pc, should not be used by any other mac, even if i switch off the device. I tried through dhcp reservation option which maps the ip address to a mac address, it works. but the problem is, when i switch off the...

    Mohdanwarahmed15 pointsBadges:
  • Cisco routing problem

    I have a Cisco router (routerA) at a remote site, which connects point-to-point to the HQ site (routerB), and it needs to communicate to another router (routerC) that is connected at the HQ site. From the CLI in routerA I cannot ping routerC, but from a PC located with routerA, I can open a dos...

    Jdleon85 pointsBadges:
  • Internal LAN domain on Speedtouch 716

    Hi Does anyone know how to alter the internal .lan suffix on my speedtouch router? Not only the device itself is reachable with speedtouch.lan but also all DHCP devices receive a .lan suffix. I want to set up an internal domain name. Any help much appreciated!

    Thevoyager4310 pointsBadges:
  • Cisco Networking

    How can we provide load sharing on single router of two ISPs. plz let us suggest on the same.

    Bhupendra205 pointsBadges:
  • Connect Wireless G ADSL2+ router with Access Point

    i have a d-link wireless g adsl2+router dsl-2640u connect direct to phone line with : ssid=blink ip= 192.168.1.1 wep=0022b0c2cd61 so, i dont have the user name and password for administrator to logon and change the wep code. but,when i connect to access point, the wep of access point didnt take the...

    Army125 pointsBadges:
  • Cisco 2811 VLAN Usage

    I inherited a network that has a Cisco 2811 router setup with the following: interface FastEthernet0/0 no ip address no ip route-cache cef no ip route-cache duplex full speed 100 ! interface FastEthernet0/0.18 description Data VLAN encapsulation dot1Q 18 native ip address 10.221.18.1 255.255.255.0...

    Zwitter1535 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following