• Wireless network lease change rate

    How do I set a wireless network lease change rate to be longer?

    Eliaswharton5 pointsBadges:
  • Using IP helper-address on a VLAN with two subnets

    I am trying to get IP helper-address to be able to pull DHCP addresses from a super scope. Right now it will only pull from the subscope that matches the subnet of the primary subnet for the vlan. Does anyone know of a way around this? Or if there would be an adverse affect on the current DHCP...

    Jfenton5 pointsBadges:
  • Problems with connecting 2 sites with same IP range via VPN

    We are about to connect 2 sites together using IPSec VPN and both of the sites have exactly the same Private 10.0.0.0 255.255.248.0 addressing scheme but neither can change on account of server setup. Just wondering if anyone knows of any problems with 2 sites having the same private addressing...

    Houghto20 pointsBadges:
  • Layer 2/3 switches

    When I am trying to put the default gateway in layer 2 switches with IP default-gateway xxxxx command it okay. But If I'm trying to put the default-gateway in 3560(layer 3) switches with IP default-gateway xxxxxxx command its giving me error that invalid command.

    Jadu50 pointsBadges:
  • Unable to read eeprom – Cisco 2800

    Hello, A Cisco 2800 router came to the company with power supply problems. Our technicians changed the power supply and the initial problem was solved (it didn't started at all). Just to check what the console displayed at boot up, I saw this output System Bootstrap, Version 12.3(8r)T8, RELEASE...

    Faith925 pointsBadges:
  • Configuring Netgear WGT624 Router with Acer Aspire Netbook

    Does anyone know how I could go about configuring my Netgear WGT624 router to work with my new Acer Aspire netbook? I currently have a laptop operating on my Netgear router, but yesterday, when I tried to log on to the internet with my Acer Aspire netbook, nothing? my router is secured. The funny...

    NYC5 pointsBadges:
  • One PC on my Wireless LAN cannot connect to internet

    I have a wireless LAN using ADSL. I have connected five PCs with no problem but there is one (Vista) laptop that connects fine to the router but the 'network map' in the 'network and sharing center' shows a red cross between the router and the internet. Windows troubleshooter doesn't fix the...

    Bellissimmo5 pointsBadges:
  • Connecting more than one router together

    I am trying to connect two router boxes together so I can connect 8 computers to one line. I have two router boxes, one with 5 connections with one with 8 so I need to connect them together but just plugging in a cord between the two is not working. What am I doing wrong and how can I fix?

    Gclarkfl5 pointsBadges:
  • how do I boost range of wireless -N router?

    I have a Linksys WRVS4400N for my home office and it works great for inside the house. I also have a gazebo about 120 ft away from the router that I like to sit out on in nice weather to work. I get very low reception out there (1/2 bar) and would like to boost that. Will a WAP4400N accomplish that...

    NaplesKD5 pointsBadges:
  • How does routing protocol work?

    Hi Engineers, My name is vinod, I would like to no routing protocols, like how RIP, IGRP, EIGRP, OSPF and BGP works and what is advantage and disadvantage of this protocols, specifically what is route poisoning. I will appreciate for any kind of answer and any attachment or links will also help me....

    Hacky5 pointsBadges:
  • Can we use a Windows Server 2003 configured as a router to do qos when the switch does not support it?

    Can a Windows 2003 server be used as a QOS device to prioritize packets on the network to prevent VOIP latency? The current switch and gateway do not support qos.

    Karl Gechlik9,860 pointsBadges:
  • Differences of IP and IPX

    What is the difference between IP and IPX routed protocols? Particularly in their protocol stack and addressing scheme?

    Sano5 pointsBadges:
  • Anyone know of a free simulator for Cisco router and switch configuration?

    Can anyone recommend or suggest a free simulator for Cisco router and switch configuration? Thank you!

    NetworkingATE1,545 pointsBadges:
  • How to configure encapsulation and bandwidth in D-link router

    I am going to upgrade my Internet Leased Line Connection to 2Mbps. I have a Dlink DRO-250i router. My ISP provided me the following configuration for me to configure router: WAN IP = 172.***.***.***                Numbered SUBNET = 255.255.255.252 LAN IP = 210.***.***.***      ...

    SearchEnterpriseWAN1,080 pointsBadges:
  • Free IT Book: Stealing the Network

    This week's free IT book is a little bit different than the ones we usually feature. Stealing the Network from Sygress contains fictional stories of real life possibilities meant to inspire security and technology pros alike to wonder and muse on the what ifs of security vulnerabilities. For a...

    MelanieYarbrough6,345 pointsBadges:
  • 2IPS’s, 2 routers (1 router per each ISP) connected 8 workstations through 2 L1-switches – will this work?

    2 IPS's, 2 routers (1 router per each ISP, diferent LAN-subnet on each router) connected to 8 workstations (through 2 L1-switches) - will this work? (it does actually work but with disruptions)? 2 ISPs are required in case one IPS's connection is down. Thequestion is will the other ISP's connection...

    Eager2knowlan35 pointsBadges:
  • Is it the encryption level?

    I've got a Linksys BEFSR81 wired router, which is networked to about 5 other Linksys/Motorola routers. The BEFSR81 is on WEP, as are the others. The system runs at a crawl after i download the first 5mb of most files. I have been told that it could be that it's because this system is on WEP. Is it...

    Strtme5 pointsBadges:
  • CLI config confirmation

    Hi, does anyone know if d-link is manufactured by Cisco? There is this client that asked me on how to create multiple IP addresses on a single interface of Cisco router, but the switch connected to it was a d-link switch. Of course, the solution was intervlan routing but I haven't seen a d-link CLI...

    Yeahboy900 pointsBadges:
  • How do you update Cisco access point 1200?

    How can I update Cisco access point 1200?

    Rossy145 pointsBadges:
  • Can I connect two Windows 7 machines via Wi-Fi with no router?

    Can I connect two Windows 7 machines together via Wi-Fi without using a router? I need to copy files both ways and the only connections in common on both machines are Wi-Fi 802.11 N.

    thongtarget21485 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following