• Setting up two networks

    I have thought about setting up two separate networks (1 PC, 1 Apple) due to apple connectivity issues with the current network config. Any advice on setting up the network within the network? I would like the new network to have its own DHCP server. Using just an easy Netgear wireless router for...

    Hurley30 pointsBadges:
  • Upgrade Cisco aironet access point 1130 from autonomous to lightweight

    Please, how do I upgrade Cisco aironet access point 1130 from autonomous to lightweight. How can I do this step-by-step?

    Cisco solutions5 pointsBadges:
  • Multiple VLANs with Local DNS

    Hello guys, I configured router on a stick with multiple VLANs in Cisco 1800 I noticed this error when add VLAN 5 my local DNS won't resolve the URL request, but my first,second & third VLANs are working fine you can surf to the internet using my local DNS. is there a limitation of VLANs in...

    Bsm122045 pointsBadges:
  • Pix 515E firewall inside traffic monitoring and control

    First of all thanks Mr. Layer9 for your such a nice and helpful participation in this question. By reading all this, I also got some questions in mind to ask from you. I hope you will please me. I have pix firewall 515e with Cisco router 2600 series, in fact I want do two tasks on it, first that...

    Techartist20 pointsBadges:
  • Setting up RPC over HTTP

    We run a 2003 server with Exchange 2003 (one PC). We have a leased line. Our router has an external IP which is nated to our servers internal IP. When we setup the remote outlook 2003 it won't connect to the exchange. We can load the SSL certificate and view the website in the "Default Web site "...

    Easybrian50 pointsBadges:
  • Connect Linksys Router with Dell switch

    I am looking for a solution. I have a Linksys with ddwrt firmware. I also have a Dell powerconnect 3324 switch. I want to connect the CSU/DSU to the linksys so that I will have a firewall/dhcp/nat etc.. and then into the switch so that I can plug clients into it. Can anyone explain what I need? or...

    Joey30025 pointsBadges:
  • What is meant by flapping Cisco 2800 router?

    We have a Cisco 2800 series router, L3 catalyst 3750 series and watchguard (firewall) and that is connect to L2 switches. But when we connect to router flapping occurs, now we connected to firewall it works fine. Please rectify this problem.

    285210 pointsBadges:
  • What hardware is needed for VPN?

    Hi Guys, I'm hoping you can help me. I need to find out what extra hardware I will need to get to provide VPN access into my workplace. We currently have a DSL connection into a Westell 2200 Modem into a Linksys BEFW11S4 router into a Windows 2003 server with one nic. My questions are: Do I need...

    Fullonjohn5 pointsBadges:
  • Linksys router issue

    We are a small organization using Linksys WRT54G wireless routers in a section of our offices. One router will not accept a change from WEP to WPA2. Attempts to update the firmware (in the hopes that this would resolve the issue) fail both from the external updater and from within the router...

    Pressler29042,190 pointsBadges:
  • Measuring a wireless router’s signal strength

    How can you measure your wireless router’s signal strength? Can it be boosted? And what router has the best signal strength right out of the box?

    TeachMeIT975 pointsBadges:
  • Wireless network lease change rate

    How do I set a wireless network lease change rate to be longer?

    Eliaswharton5 pointsBadges:
  • Using IP helper-address on a VLAN with two subnets

    I am trying to get IP helper-address to be able to pull DHCP addresses from a super scope. Right now it will only pull from the subscope that matches the subnet of the primary subnet for the vlan. Does anyone know of a way around this? Or if there would be an adverse affect on the current DHCP...

    Jfenton5 pointsBadges:
  • Problems with connecting 2 sites with same IP range via VPN

    We are about to connect 2 sites together using IPSec VPN and both of the sites have exactly the same Private 10.0.0.0 255.255.248.0 addressing scheme but neither can change on account of server setup. Just wondering if anyone knows of any problems with 2 sites having the same private addressing...

    Houghto20 pointsBadges:
  • Layer 2/3 switches

    When I am trying to put the default gateway in layer 2 switches with IP default-gateway xxxxx command it okay. But If I'm trying to put the default-gateway in 3560(layer 3) switches with IP default-gateway xxxxxxx command its giving me error that invalid command.

    Jadu50 pointsBadges:
  • Unable to read eeprom – Cisco 2800

    Hello, A Cisco 2800 router came to the company with power supply problems. Our technicians changed the power supply and the initial problem was solved (it didn't started at all). Just to check what the console displayed at boot up, I saw this output System Bootstrap, Version 12.3(8r)T8, RELEASE...

    Faith925 pointsBadges:
  • Configuring Netgear WGT624 Router with Acer Aspire Netbook

    Does anyone know how I could go about configuring my Netgear WGT624 router to work with my new Acer Aspire netbook? I currently have a laptop operating on my Netgear router, but yesterday, when I tried to log on to the internet with my Acer Aspire netbook, nothing? my router is secured. The funny...

    NYC5 pointsBadges:
  • One PC on my Wireless LAN cannot connect to internet

    I have a wireless LAN using ADSL. I have connected five PCs with no problem but there is one (Vista) laptop that connects fine to the router but the 'network map' in the 'network and sharing center' shows a red cross between the router and the internet. Windows troubleshooter doesn't fix the...

    Bellissimmo5 pointsBadges:
  • Connecting more than one router together

    I am trying to connect two router boxes together so I can connect 8 computers to one line. I have two router boxes, one with 5 connections with one with 8 so I need to connect them together but just plugging in a cord between the two is not working. What am I doing wrong and how can I fix?

    Gclarkfl5 pointsBadges:
  • how do I boost range of wireless -N router?

    I have a Linksys WRVS4400N for my home office and it works great for inside the house. I also have a gazebo about 120 ft away from the router that I like to sit out on in nice weather to work. I get very low reception out there (1/2 bar) and would like to boost that. Will a WAP4400N accomplish that...

    NaplesKD5 pointsBadges:
  • How does routing protocol work?

    Hi Engineers, My name is vinod, I would like to no routing protocols, like how RIP, IGRP, EIGRP, OSPF and BGP works and what is advantage and disadvantage of this protocols, specifically what is route poisoning. I will appreciate for any kind of answer and any attachment or links will also help me....

    Hacky5 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following