Routers

Cisco 2811 Power Supply Jumper - PS Type

I have replaced a DC supply with an AC 100V but the new power supply doesn not havbe anywhere for the PS Type Jumper connection. What does the PS Type do and can I operate without that connected (as the new power supply has no connector) ? Thanks in Advance.

Laptop cannot detect home WLAN server

I have two T42 laptops which connect to a Siemens Gigaset Wlan server. One has been used by my son at boarding school and the settings have probably been changed. It now does not see the home Wlan server any more, even so it still sees weaker servers in surrounding houses. The second T42 sees and...

Is it possible to lift router-based bandwidth caps (if they exist)?

like the title says, is it possible to lift a router based bandwidth cap (if one exists) on my router. im only pulling about 100kb/s on a DSL line. i dont have a wireless setup running, jus straight cat-5 from the router to my cpu. i would assume capping would be done server side, but someone said...

When not to use a Layer 3 switch over a router

If a Layer 3 switch is faster than a router, why can't we use an L3 in place of a router?

Problem in Linksys Wireless G ADSL Home Gateway

Hi, I am using Linkys modem (model : annex -A) i am configure the modem using rechargable card,encapsulation is RFC 2516 pppoE,multiplexing is LLC,qos type is UBR,autodetect is Enabled,Dsl modulation is ADSL2+, vpi/vci is 0.35, after save changes i see the stsatus interface is up, but i try...

Routing, Networking

What would be needed to have each network segment treated as a separate network for routing purposes?

Central Router to assign the same IP address to the VPN Clients

i have several PCs connecting to a central site router using the VPN Client and different media (DSL, ISDN, UMTS). I would like the central router to assign the same IP address to the VPN clients each time they connect again to the central site. So far I have an IP pool configured on the central...

QoS on my cisco 3620 router for my VoiP traffic

I am wanting to enable QoS on my cisco 3620 router for my VoiP traffic. I believe this can be done using ACL's instead of SDM. Does anyone have any info?.

Configuring Netgear WGT624 Router with Acer Aspire Netbook

Does anyone know how I could go about configuring my Netgear WGT624 router to work with my new Acer Aspire netbook? I currently have a laptop operating on my Netgear router, but yesterday, when I tried to log on to the internet with my Acer Aspire netbook, nothing? my router is secured. The funny...

Cisco Router 2800 series step by step configuration using DSL

can you please provide me step by step configuration how to connect/use DSL connection for Cisco Router 2800 series. i want to use DSL as backup in case T1 is down.

Linksys WVC54GCA cannot connect up with 2Wire Router

I was using my Linksys WVC54GCA wireless-G Internet Home Monitoring Camera, with my NetgearDG834PN ADSL Modem Wireless Router without any problem. When I upgrade my line to Singtel MIO Home, I was provided with a 2WIRE 2701HGV-E. Wireless connection for my PC/laptop have no problem. However, I...

Can I use a Linksys BEFSR41 as a hub connected to a Linksys WRT150N?

I have replaced my BEFSR41 VER 3 with a WRT150N. Can I use the BEFSR41 as a hub connected to the 150N?

Need help with small wireless network

if i have a wireless N router and i want to hook up a desktop at the other end of the house up with a network adapter do i need an N adapter or can i use a G?

How to connect a server using DSL routers

My company is having 30 users at different different location all of them is having separete DSL routers with a VPN tunnel ... And i wanted to connect them to the main server and create a active directory to deny using the cdrom,startmenu, flash drive, games and etc they should only use the company...

4 VLANS, 3 locations, 3 Routers, No communication between Lans or VLANs

OK, here is my problem, I'm working on a project in the Test phase right now. I have 3 routers (Cisco 2811s), all running EIGRP, these are seperating 3 goegraphical regions. Each of these Routers is linked via Trunking line to a Switch which has 4 VLANs enable. According to everything I have...

Multiple Networks

Hi, I'm a bit new to networking... I'd like to ask for for from you guys out there... I want to set up 3 networks for our school - 2 in the computer lab and 1 in the office... However, I'd like that to assign 192.168.1.x to Lab1, 192.168.2.x to Lab2 and 192.168.3.x to the office for easy...

Creating a Trust between two networks on two routers on same floor

I have two networks -- the first is 192.168.1.1/24 and the other is 192.168.33.1/24. Each network has it own DSL modem/router for Internet connection and are Windows domains (diffrent domain names). The two routers are physically near (50cm) and the two networks are sharing the same floor. I need...

How to configure SIP server in Cisco 3660 router?

I'm not able to configure SIP server in Cisco 3660 router (IOS is 12.4T). Can anyone please tell me how? Thank you.

Switching ISPs and need help reconfiguring VPN and Firewall settings

When switching from DSL to Cable Internet... when you have a router w/VPN & Firewall and a static IP - how do you switch the service? Obviously just plugging the new service provider in won't work. I know you need the log in and password to the router but after that?

Configuring Cisco 1700 with Cyberoam box

This is regarding the Cisco 1700 series router, which has been configured by some other experts. We are now having a lease line and the Cisco router connected with Cyberoam box. Earlier we had an ADSL connection, so I had direct IP where there was no need to logging into Cyberoam everytime. But...