Routers

Cisco 2960 link aggregation with Foundry

How do i setup a 2960 link-aggregate with Foundry?

Will having a router between each switch improve performance?

Will having a router between each switch improve performance on a network?

How to block a specific URL in Cisco routers

Can you block a specific URL in Cisco routers? If so, can you tell me the steps?

Best router for VPN in small & medium size business network?

which is the best router for vpn in small & medium size buissness network?

Bandwidth and Connection Speed

I have a question regarding bandwidth and connection speed. I know that bandwidth is provided by the ISP Service but I wanted to know that the does the wireless or wired NIC card in our computer uses the bandwidth provided by ISP to connect to the basestation(Router) or the connection speed...

Which wireless routers will work with PlusNet?

which wireless routers will work with plusnets provided modem the d link dsl 320b?

Cisco 2811 configuration for managing traffic through two Internet connections

Hi all, I have one cisco 2811 router with serial interface for leased line connection ton internet and an adsl wic for Internet connexion too. What I what is to let http traffic goes through the adsl connexion and other trafic goes through the leased line. IS it possible and how? Thanks

Routing VLANs to public IPs from Intranet through Fortigate firewall

We have three virtual local area networks (VLANs) as follows: 1 data, 2 voice and 3 wireless. We have 6506e at the core, and interVLAN routing is working fine. The problem is implementing FortiGate firewall in transparent mode and terminating the ISP on the router with Ethernet output. I am not...

cisco ipsec vpn: vpn up but no traffic/ping

Hi, I'm having some problems setting up an ipsec vpn between a Cisco 851 and a Draytek Vigor 2200E+. the ipsec vpn seems to establish well, passes ipsec phase 2, and shows up as an active ipsec session in both routers. the problem is that i'm unable to ping, or send any traffic, to any of the...

DNS issue within the local network

Dear members of this site, I am presently doing CCNA and took some exams of MCSE 2003 track. I have a very important question to ask, it is actually regarding a DNS issue within the local network. If there are 2 Computers (ComputerA and Computer B) both are connected to a switch making a...

WAN configuration

how configure the central router in central office? how configure the router in remote branch office ? please,give me a sample configuration of central router configuration in central office. LINE :E1 FOR CENTRAL OFFICE BANDWIDTH OF BRANCH OFFICES:256 KBPS ROUTER IN CENTRAL OFFICE : CISCO 3800...

Multiple NICs

hi.. in my office i have isa server with 2 nic one is conected to dsl router with ip address of 192.168.1.1,gteway 192.168.1.254 and 2nd nic connected to switch with ip adress of 192.168.0.1,gateway 192.168.1.254 ,the client side ip range is 192.168.0.x my qustion is how 192.168.0.1 is pinging...

Cisco 2811 PVDM2-24DM Initialising

Dear All Professionals, We have taken on the installation of a Cisco 2811 to make digital communications over ISDN and are requiring assistance with our hardware configuration . We have all the necessary modules and so on however our current problem is: We have the digital modem module in slot 0...

How to setup wireless Internet access on 2 desktop PCs

I have 2 desktop pc's in my home and I'm not sure what I need to get internet connection on both without running cables accross the floor. I have DSL through my phone company and I think I need 2 wireless cards and a router but I don't know what kind or if that's even correct.

Configuring the DHCP server behind the router for 3 networks

Network 1 (192.168.50.0/24)---"Router"---"Switch or bridge"---"DHCP Server" Network 2 (172.16.0.0/24)______|| Network 3 (10.0.0.0/24)_________| how should i config DHCP server so every client's IP in all 3 networks can be assign by DHCP?

Load Balancing of Unequal Ethernet Bandwidth

Is it possible to aggregate and then load balance the unequal ethernet circuits like so: I have two ethenet circuits on my Cisco router. Both have equal costs to the next hop. Ethernet Circuit #1- 200M Ethernet Circuit #2 - 100M Can I aggregate both ethernet circuits so that the total amount of...

Router configured one hop from PC with default gateway as IP address

What would happen and what would be the flow if I configured a PC with the default gateway as an IP address of the router that is one hop away -- that means, I have one more router in between?

Cisco's 2500 series router and WAN card serial interface differences

What is the difference between the serial interface of 2500 series Cisco routers and the serial interface of WAN cards (WIC-1t)? If there is no difference then is there any data-rate difference between the above two serial interfaces?

How to configure load balancing on Cisco 1751 router with 2 serial WAN connections?

How to configure load balancing on Cisco 1751 router with 2 serial WAN connections (different service providers)? Thank you.

Hub, Router and Switch

what is the difference, how do you know which one to use? thanks.