Telnet Dilemma!!
Hello, After googling about how to automate Telnet to network devices. I would like to create a batch file and script files if needed to Telnet IPs of several network devices and execute a set of pre-stored commands including the password. At this point i can’t seem to figure out how to pass the password [...]
Answer Question
| July 15, 2005 4:44 AM
DataCenter, Foundry, Network monitoring, Network testing, Networking, Performance management, Programming Languages, Remote management
Hello, After googling about how to automate Telnet to network devices. I would like to create a batch file and script files if needed to Telnet IPs of several network devices and execute a set of pre-stored commands including the password. At this point i can’t seem to figure out how to pass the password [...]
Answer Question
| July 15, 2005 4:44 AM
DataCenter, Foundry, Network monitoring, Network testing, Networking, Performance management, Programming Languages, Remote management
Automate Telnet command to several network devices
Hello, After googling about how to automate Telnet to network devices. I would like to create a batch file and script files if needed to Telnet IPs of several network devices and execute a set of pre-stored commands including the password. At this point i can’t seem to figure out how to pass the password [...]
Answer Question
| July 13, 2005 3:19 AM
Foundry, Networking, Remote management
Hello, After googling about how to automate Telnet to network devices. I would like to create a batch file and script files if needed to Telnet IPs of several network devices and execute a set of pre-stored commands including the password. At this point i can’t seem to figure out how to pass the password [...]
Answer Question
| July 13, 2005 3:19 AM
Foundry, Networking, Remote management
shapecfg and squid configurations request
please who knows how to configure shapecfg (bandwidth manager) and squid (proxy) under redhat linux 9.2. I will like the person to give a step to step approach. please reply with urgency. Thanks
Answer Question
| July 8, 2005 9:23 PM
Bandwidth, DataCenter, Network management software, Network monitoring, Remote management, Systems management software, Unisys
please who knows how to configure shapecfg (bandwidth manager) and squid (proxy) under redhat linux 9.2. I will like the person to give a step to step approach. please reply with urgency. Thanks
Answer Question
| July 8, 2005 9:23 PM
Bandwidth, DataCenter, Network management software, Network monitoring, Remote management, Systems management software, Unisys
Hiding System Tray ICons
Hi Guys.. I want to know how do we remove/hide system tray icon without stopping the service. I have a monitoring software which appears in the system tray which i want to hide. I m using win xp prof . I dont want to hide it i want to remove the icon from the system [...]
Answer Question
| July 6, 2005 9:24 AM
Cabling, DataCenter, Desktop security, Desktops, Development, FAT and NTFS, Graphical User Interfaces, Hardware, Help Desk, Hubs, Installation, Intel PC hardware, Licensing, Network management software, Networking, Performance/Tuning, Policies, Power management, Registry, Remote management, Routers, Software distribution, Switches, Tech support, Thin clients, Third-party services, Vendor support, Windows 2000 desktop, Windows 95/98, Windows client administration and maintenance, Windows XP
Hi Guys.. I want to know how do we remove/hide system tray icon without stopping the service. I have a monitoring software which appears in the system tray which i want to hide. I m using win xp prof . I dont want to hide it i want to remove the icon from the system [...]
Answer Question
| July 6, 2005 9:24 AM
Cabling, DataCenter, Desktop security, Desktops, Development, FAT and NTFS, Graphical User Interfaces, Hardware, Help Desk, Hubs, Installation, Intel PC hardware, Licensing, Network management software, Networking, Performance/Tuning, Policies, Power management, Registry, Remote management, Routers, Software distribution, Switches, Tech support, Thin clients, Third-party services, Vendor support, Windows 2000 desktop, Windows 95/98, Windows client administration and maintenance, Windows XP
Remote Desktop Web Connection
Can I access local client disk drives from a TSWeb session and, if so, HOW? I am running Internet Explorer 6 on a WinXP client accessing a Win 2003 Terminal Server using Remote Desktop Web Connection.
Answer Question
| June 16, 2005 8:20 AM
DataCenter, Networking, Remote management
Can I access local client disk drives from a TSWeb session and, if so, HOW? I am running Internet Explorer 6 on a WinXP client accessing a Win 2003 Terminal Server using Remote Desktop Web Connection.
Answer Question
| June 16, 2005 8:20 AM
DataCenter, Networking, Remote management
DFS replication problems & unable to add target through DFS manager (Win2003)
When attempting to add a target through DFS manager in Windows 2003, we are receiving the following error: “In order for <servernamepath> to join replication, file replication service on <server> needs to be configured as auto-start and running. The error listed below occurred during the configuration process. You can manually finish the configuration by clicking [...]
Answer Question
| June 16, 2005 2:52 PM
DataCenter, Network management software, Remote management, Servers, Tech support, Windows Server 2003
When attempting to add a target through DFS manager in Windows 2003, we are receiving the following error: “In order for <servernamepath> to join replication, file replication service on <server> needs to be configured as auto-start and running. The error listed below occurred during the configuration process. You can manually finish the configuration by clicking [...]
Answer Question
| June 16, 2005 2:52 PM
DataCenter, Network management software, Remote management, Servers, Tech support, Windows Server 2003
Remote Network Problem
Hello. Can anyone give some advice on this subject? I have to say, this problem doesn’t necessarily deal with the equipment or technology, but rather the people behind it. Has this happened already: if companies can outsource programming and other such tasks offshore deemed by the higher-ups, who’s to say that, through remote technology, network [...]
Answer Question
| June 14, 2005 11:30 AM
Career development, DataCenter, Hardware, Network applications management, Networking, Remote management
Hello. Can anyone give some advice on this subject? I have to say, this problem doesn’t necessarily deal with the equipment or technology, but rather the people behind it. Has this happened already: if companies can outsource programming and other such tasks offshore deemed by the higher-ups, who’s to say that, through remote technology, network [...]
Answer Question
| June 14, 2005 11:30 AM
Career development, DataCenter, Hardware, Network applications management, Networking, Remote management
Restricting Broswe capability in IE
A generic User account is used to run an application in an IE Browswer – I would like to remove the address bar so it can’t be used. I think its a Registry tweak – can it be done using a policy specific to that account in Active Domain? If so how? Thanks Cripdan
Answer Question
| June 13, 2005 4:24 AM
DataCenter, Desktop security, Desktops, Hardware, Help Desk, Intel PC hardware, Policies, Power management, Registry, Remote management, Servers, Software distribution, Tech support, Thin clients, Windows 2000 desktop, Windows client administration and maintenance, Windows XP
A generic User account is used to run an application in an IE Browswer – I would like to remove the address bar so it can’t be used. I think its a Registry tweak – can it be done using a policy specific to that account in Active Domain? If so how? Thanks Cripdan
Answer Question
| June 13, 2005 4:24 AM
DataCenter, Desktop security, Desktops, Hardware, Help Desk, Intel PC hardware, Policies, Power management, Registry, Remote management, Servers, Software distribution, Tech support, Thin clients, Windows 2000 desktop, Windows client administration and maintenance, Windows XP
File replication and DNS problems between 2 domain controllers
I am running 2 Windows 2003 domain controllers, the primary one running SP1. I am receiving numerous errors on a daily basis in a couple of different event logs. System log: Netlogon error ID 5774: ForestDNSZones.domain.com 600 IN A [PDC IP address] failed on [BDC IP]. Returned response code 5, returned status code 9017. DNS [...]
Answer Question
| June 8, 2005 12:24 PM
DataCenter, Network management software, Network monitoring, Network testing, Networking, Performance management, Remote management, Windows Server 2003
I am running 2 Windows 2003 domain controllers, the primary one running SP1. I am receiving numerous errors on a daily basis in a couple of different event logs. System log: Netlogon error ID 5774: ForestDNSZones.domain.com 600 IN A [PDC IP address] failed on [BDC IP]. Returned response code 5, returned status code 9017. DNS [...]
Answer Question
| June 8, 2005 12:24 PM
DataCenter, Network management software, Network monitoring, Network testing, Networking, Performance management, Remote management, Windows Server 2003
problem with exchange sync and pocket pc 2003
i have a HP iPAQ hx4700 with Pocket PC 2003 on it that connect to the internet through my phone cellolar (with bluethooth connection), i want to sync all my contact and my calender on my ipaq to my exchange small buisness server 2003 through the internet,my server connect to the internet and are behind [...]
Answer Question
| May 25, 2005 1:57 PM
802.11 networking equipment, Auditing, Biometrics, BlackBerry, Corporate Financial Applications, DataManagement, Digital certificates, ERP, Exchange, Firewalls, Forensics, Handheld devices, Help Desk, Identity & Access Management, Imanage, Implementation, Incident response, Intrusion management, IT architecture, Network applications management, Network management software, Network monitoring, Network security, Network testing, Networking, Outsourcing, Palm OS, Planning, Protocol analysis, provisioning, Remote management, RFID, Security, Security management, Security products, Security tokens, Single sign-on, Symbian, Tech support, Third-party services, Vendor support, VPN, Windows Mobile, Wireless, Wireless Access Points, Wireless PC cards, Wireless standards
i have a HP iPAQ hx4700 with Pocket PC 2003 on it that connect to the internet through my phone cellolar (with bluethooth connection), i want to sync all my contact and my calender on my ipaq to my exchange small buisness server 2003 through the internet,my server connect to the internet and are behind [...]
Answer Question
| May 25, 2005 1:57 PM
802.11 networking equipment, Auditing, Biometrics, BlackBerry, Corporate Financial Applications, DataManagement, Digital certificates, ERP, Exchange, Firewalls, Forensics, Handheld devices, Help Desk, Identity & Access Management, Imanage, Implementation, Incident response, Intrusion management, IT architecture, Network applications management, Network management software, Network monitoring, Network security, Network testing, Networking, Outsourcing, Palm OS, Planning, Protocol analysis, provisioning, Remote management, RFID, Security, Security management, Security products, Security tokens, Single sign-on, Symbian, Tech support, Third-party services, Vendor support, VPN, Windows Mobile, Wireless, Wireless Access Points, Wireless PC cards, Wireless standards
cannot ping from router-2
hi all i am in an ISP.I have a cisco 3600 router and Keymile LECAR modem pair(V.35/G.703)at my end and cisco 1700 series router and keymile LECAR modem pair at the customer end.From my end when i see from router i found the line is up but when i try pinging the router at the [...]
Answer Question
| May 27, 2005 12:25 AM
Availability, Bandwidth, Benchmarking, Cabling, Cisco, DataCenter, Fault isolation, Hardware, IPv4, Modems/Cable Modems, Network applications management, Network Interface Cards, Network management software, Network Management Systems, Network monitoring, Network testing, Networking, Networking Equipment, Optical Networking, Performance management, Protocol analysis, QoS, Remote management, Routers, Security, Switches, TCP, UDP
hi all i am in an ISP.I have a cisco 3600 router and Keymile LECAR modem pair(V.35/G.703)at my end and cisco 1700 series router and keymile LECAR modem pair at the customer end.From my end when i see from router i found the line is up but when i try pinging the router at the [...]
Answer Question
| May 27, 2005 12:25 AM
Availability, Bandwidth, Benchmarking, Cabling, Cisco, DataCenter, Fault isolation, Hardware, IPv4, Modems/Cable Modems, Network applications management, Network Interface Cards, Network management software, Network Management Systems, Network monitoring, Network testing, Networking, Networking Equipment, Optical Networking, Performance management, Protocol analysis, QoS, Remote management, Routers, Security, Switches, TCP, UDP
cannot ping from router
hi all i am in an ISP.I have a cisco 3600 router and Keymile LECAR modem pair(V.35/G.703)at my end and cisco 1721 router and keymile LECAR modem pair at the customer end.From my end when i see from router i found the line is up but when i try pinging the router at the client [...]
Answer Question
| June 2, 2005 12:23 AM
Availability, Bandwidth, Benchmarking, Cabling, Cisco, DataCenter, Fault isolation, Hardware, IPv4, Modems/Cable Modems, Network applications management, Network Interface Cards, Network management software, Network Management Systems, Network monitoring, Network testing, Networking, Networking Equipment, Optical Networking, Performance management, Protocol analysis, QoS, Remote management, Routers, Security, Switches, UDP
hi all i am in an ISP.I have a cisco 3600 router and Keymile LECAR modem pair(V.35/G.703)at my end and cisco 1721 router and keymile LECAR modem pair at the customer end.From my end when i see from router i found the line is up but when i try pinging the router at the client [...]
Answer Question
| June 2, 2005 12:23 AM
Availability, Bandwidth, Benchmarking, Cabling, Cisco, DataCenter, Fault isolation, Hardware, IPv4, Modems/Cable Modems, Network applications management, Network Interface Cards, Network management software, Network Management Systems, Network monitoring, Network testing, Networking, Networking Equipment, Optical Networking, Performance management, Protocol analysis, QoS, Remote management, Routers, Security, Switches, UDP
Setting Up remote printing
Our IT consultant cannot figure out how to use typical USB connected pritner to print at the remote site. They say only parelle printers can be used, UNLESS THEY DO SOME MORE RESEARCH. Should I just buy a USB to Parallel adapter, cannot find printers with just parallel connections? Suggestions? Solutions. Tom Shred Ready
Answer Question
| May 18, 2005 9:21 AM
Remote management
Our IT consultant cannot figure out how to use typical USB connected pritner to print at the remote site. They say only parelle printers can be used, UNLESS THEY DO SOME MORE RESEARCH. Should I just buy a USB to Parallel adapter, cannot find printers with just parallel connections? Suggestions? Solutions. Tom Shred Ready
Answer Question
| May 18, 2005 9:21 AM
Remote management
Exchange 2000 issues
I seem to have 2 issues. Both are on the same setup. Windows 2000 Server running Exchange 2000. Both have all the latest patches and SP’s. 1) Mail will flow inbound just fine. Some mail will flow outbound just fine. Certian addy’s just have in the SMTP queue ( AOL,Yahoo, Bellsouth ). Other mail going [...]
Answer Question
| April 7, 2005 12:29 PM
Active Directory, Administration, Application management, Cabling, Client management, Database issues, DHCP, Dial-up networking, DNS, E-mail applications, Exchange, Exchange 2000, Exchange Server ActiveSync, Features/Functionality, Help Desk, HTTP, Hubs, Installation, Mail protocols, Maintenance, Microsoft Windows, Modems/Cable Modems, Network applications management, Network Interface Cards, Network Management Systems, Network monitoring, Network testing, Networking, Networking Equipment, Networking services, Norton, Outlook, Outlook Mobile Access, Performance management, POP3, Remote management, Routers, Security, Service and support, SMTP, Storage, Storage management, Switches, Symantec, TCP, Tech support, Third-party services, Vendor support, Vendors, WINS, Yahoo
I seem to have 2 issues. Both are on the same setup. Windows 2000 Server running Exchange 2000. Both have all the latest patches and SP’s. 1) Mail will flow inbound just fine. Some mail will flow outbound just fine. Certian addy’s just have in the SMTP queue ( AOL,Yahoo, Bellsouth ). Other mail going [...]
Answer Question
| April 7, 2005 12:29 PM
Active Directory, Administration, Application management, Cabling, Client management, Database issues, DHCP, Dial-up networking, DNS, E-mail applications, Exchange, Exchange 2000, Exchange Server ActiveSync, Features/Functionality, Help Desk, HTTP, Hubs, Installation, Mail protocols, Maintenance, Microsoft Windows, Modems/Cable Modems, Network applications management, Network Interface Cards, Network Management Systems, Network monitoring, Network testing, Networking, Networking Equipment, Networking services, Norton, Outlook, Outlook Mobile Access, Performance management, POP3, Remote management, Routers, Security, Service and support, SMTP, Storage, Storage management, Switches, Symantec, TCP, Tech support, Third-party services, Vendor support, Vendors, WINS, Yahoo
Remote Access of WinXP Pro Domain Server through VPN
I set up a windows XP Pro machine as a domain server with permission for limited user access. It works fine from the workgroup and I can connect from any location in the office using my user ID as an Administrator. When I go to connect to the server through the VPN Router, I can’t [...]
Answer Question
| March 31, 2005 8:52 AM
Networking, Remote management
I set up a windows XP Pro machine as a domain server with permission for limited user access. It works fine from the workgroup and I can connect from any location in the office using my user ID as an Administrator. When I go to connect to the server through the VPN Router, I can’t [...]
Answer Question
| March 31, 2005 8:52 AM
Networking, Remote management
ftp connection
I administer a windows network, the ftp server is running on w2k3 small business server. some of my users can not get access to the ftp site, the connection is timing out, however some are able to connect, it looks like it is not a setting issue or OS issue, the clients in my network [...]
Answer Question
| March 16, 2005 12:33 PM
Availability, Bandwidth, DHCP, DNS, Ethernet, Microsoft Windows, Network Interface Cards, Network management software, Network monitoring, Networking, Networking services, Remote management, Routers, Switches, TCP, UDP, WINS
I administer a windows network, the ftp server is running on w2k3 small business server. some of my users can not get access to the ftp site, the connection is timing out, however some are able to connect, it looks like it is not a setting issue or OS issue, the clients in my network [...]
Answer Question
| March 16, 2005 12:33 PM
Availability, Bandwidth, DHCP, DNS, Ethernet, Microsoft Windows, Network Interface Cards, Network management software, Network monitoring, Networking, Networking services, Remote management, Routers, Switches, TCP, UDP, WINS
command for restricting users to one limit on cisco AS5300 at a time
Pls I need a command that will enable me to limit the access of dial up users to one log on at a time. I used username name user-maxlinks 1 password pwd. it still allow one username to be used more than one user at a time. pls waiting for responses
Answer Question
| February 23, 2005 4:51 AM
Bandwidth, Dial-up networking, Layer 3-7 Switches, Network Management Systems, Networking, Networking Equipment, Remote management, Security
Pls I need a command that will enable me to limit the access of dial up users to one log on at a time. I used username name user-maxlinks 1 password pwd. it still allow one username to be used more than one user at a time. pls waiting for responses
Answer Question
| February 23, 2005 4:51 AM
Bandwidth, Dial-up networking, Layer 3-7 Switches, Network Management Systems, Networking, Networking Equipment, Remote management, Security
bandwidth distribution-2
hi all, can u tell me how isps distribute bandwidth to the customers(both dial up and leased)how to check that proper distribution is taking place and everyone is getting the correct bandwidth.is there any software that could b used to keep an eye?what else can be done?how to control??? thanks…
Answer Question
| February 11, 2005 3:25 AM
Availability, Bandwidth, Benchmarking, Cabling, DataCenter, Development, DHCP, Dial-up networking, DNS, Fault isolation, Gigabit ethernet, Hubs, Layer 3-7 Switches, Managed Services, Modems/Cable Modems, Network applications management, Network Interface Cards, Network management software, Network Management Systems, Network monitoring, Network testing, Networking, Networking Equipment, Networking services, Performance management, Protocol analysis, QoS, Remote management, Routers, Security
hi all, can u tell me how isps distribute bandwidth to the customers(both dial up and leased)how to check that proper distribution is taking place and everyone is getting the correct bandwidth.is there any software that could b used to keep an eye?what else can be done?how to control??? thanks…
Answer Question
| February 11, 2005 3:25 AM
Availability, Bandwidth, Benchmarking, Cabling, DataCenter, Development, DHCP, Dial-up networking, DNS, Fault isolation, Gigabit ethernet, Hubs, Layer 3-7 Switches, Managed Services, Modems/Cable Modems, Network applications management, Network Interface Cards, Network management software, Network Management Systems, Network monitoring, Network testing, Networking, Networking Equipment, Networking services, Performance management, Protocol analysis, QoS, Remote management, Routers, Security
bandwidth distribution
hi all, can u tell me how isps distribute bandwidth to the customers(both dial up and leased)how to check that proper distribution is taking place and everyone is getting the correct bandwidth.is there any software that could b used to keep an eye?what else can be done?how to control??? thanks…
Answer Question
| February 14, 2005 3:18 AM
Availability, Bandwidth, Benchmarking, Cabling, DataCenter, Development, DHCP, Dial-up networking, DNS, Fault isolation, Gigabit ethernet, Hubs, Layer 3-7 Switches, Managed Services, Modems/Cable Modems, Network applications management, Network Interface Cards, Network management software, Network Management Systems, Network monitoring, Network testing, Networking, Networking Equipment, Networking services, Performance management, Protocol analysis, QoS, Remote management, Routers, Security
hi all, can u tell me how isps distribute bandwidth to the customers(both dial up and leased)how to check that proper distribution is taking place and everyone is getting the correct bandwidth.is there any software that could b used to keep an eye?what else can be done?how to control??? thanks…
Answer Question
| February 14, 2005 3:18 AM
Availability, Bandwidth, Benchmarking, Cabling, DataCenter, Development, DHCP, Dial-up networking, DNS, Fault isolation, Gigabit ethernet, Hubs, Layer 3-7 Switches, Managed Services, Modems/Cable Modems, Network applications management, Network Interface Cards, Network management software, Network Management Systems, Network monitoring, Network testing, Networking, Networking Equipment, Networking services, Performance management, Protocol analysis, QoS, Remote management, Routers, Security
Restricted access to win XP professional
I have a small WORKGROUP with windows 2000 server and 5 windows XP professional systems. All computers can read/write each other. Now I want to make one XP client secure/restric access, so that no other computer can access that except only other XP computer. How can I do that? Please advise. Thanks in advance!
Answer Question
| December 29, 2004 2:48 AM
Administration, Application security, Compliance, CRM, Database, DataCenter, Desktop management applications, DHCP, Disaster Recovery, DNS, Encryption, Exchange, Firewalls, Forensics, Help Desk, Implementation, Incident response, Information risk management, Instant Messaging, Intrusion management, Management, Network monitoring, Network security, Networking, Networking services, Physical security, Policies, Remote management, Remote users, Risk management, Secure Coding, Security, Security management, Security Program Management, Servers, System utilities, Tech support, Third-party services, VPN, Windows, Windows 2000 Server, Wireless
I have a small WORKGROUP with windows 2000 server and 5 windows XP professional systems. All computers can read/write each other. Now I want to make one XP client secure/restric access, so that no other computer can access that except only other XP computer. How can I do that? Please advise. Thanks in advance!
Answer Question
| December 29, 2004 2:48 AM
Administration, Application security, Compliance, CRM, Database, DataCenter, Desktop management applications, DHCP, Disaster Recovery, DNS, Encryption, Exchange, Firewalls, Forensics, Help Desk, Implementation, Incident response, Information risk management, Instant Messaging, Intrusion management, Management, Network monitoring, Network security, Networking, Networking services, Physical security, Policies, Remote management, Remote users, Risk management, Secure Coding, Security, Security management, Security Program Management, Servers, System utilities, Tech support, Third-party services, VPN, Windows, Windows 2000 Server, Wireless
