• Adding DASD to an IBM 9406-800 RAID

    System has Device Parity Protection and PCI-X RAID disk unit controller. Currently have 4 17.54GB drives installed and need instruction on how to install 2 additional drives. Know how to physically install drives need to know the SST steps for intalling, formating and configuring the new drive...

    Syucikas5 pointsBadges:
  • Reconnecting data store to reload of ESX

    My ESX server died due to hw failure. My data store resides on a seperate RAID5 set and I need to reconnect the datastore to my new ESX load. How can I do this without destroying the data in my disconnected /vmfs datastore?

    Jimdenver165 pointsBadges:
  • Backups to disk across GB ethernet – what’s your speed limit?

    We don't have a SAN yet. We're trying to improve backup and disaster recovery time windows so we have been testing backups to disk using the following: Windows 2003 Server Dell PowerEdge server 2GB RAM 2xXeon P4's Veritas Backup Exec 9.1 (backup file size set to 1GB each) SATA hardware RAID...

    CanesThing0 pointsBadges:
  • Increasing server performance

    Help reviving servers. Configuration current: 8 300GB disks in Raid 5 10000RPM Each. Total 2TB (70%Full) with an average of 68kb files tottal of 24 million files. The curent read rate is at 8MB/Sec on NTFS windows 2003 Partition. Any suggestions on increasing performance on current configuration....

    Dimchik0 pointsBadges:
  • Host based Striping of LUNs

    I'm looking for some information regarding host based striping of LUNs - specifically to improve performance. I have a Raid 5 LUN that hold a database. I know that I have a latency issue on this LUN so i'm debating whether to split the LUN into two seperate Raid 5 LUNS then stipe these using host...

    Geddesb0 pointsBadges:
  • SCSI RAID arrangement

    What?s the fastest & most secure SCSI RAID arrangement (cost is not an issue). What makes it fast and what makes it secure?

    1111100 pointsBadges:
  • Exchange 2003 / File Server Cluster – Best practice – WHAT IS your OPINION?

    I have setup a 2-node Win2k3 cluster with a PowerVault 13 Disk Storage. WE are using this for: 1) Exchange and 2)File/Print services I have a 2 140GB disk on a RAID 1 for with partitions q: for Quorum and E: I have the rest of the 11 on a RAID 5 139 TB 1 partion d: ** This will be for 250 USERS...

    Ocarmona0 pointsBadges:
  • Configuring a Win2003 share to be available to all XP users on networked machines

    Been a long while since I've worked with Windows, and the networking metaphor is killing me (Unix here...). I have in a server room a Win 2003 server with a large RAID. There are 4 XP machines in 2 offices, all on the same LAN/subnet (2003 server is DHCP server for the XP machines). The network is...

    Smsd15 pointsBadges:
  • RAID 1 or RAID 5

    I have 1 file server and 1 email server. both are Win2k3....one with exchange 2003 one with SQL 2000 but only 4 people using a small accounting program on it. Both are Dual XEON 2Ghz processors 1 Gb RAM 15K rpm hard drives. Ultra SCSI 160 controllers File server has software RAID 1, Exchange Server...

    TheVyrys0 pointsBadges:
  • how to maintain Windows 2000 server uptodate

    I am working on Windows 2000 server having raid configured on it. I want to know how best i can maintain our server uptodate with minimum downtime. Also how to confirm whether hardware or software raid configured.

    S1234567840 pointsBadges:
  • Capacity Expansion on RAID 5 Array

    I recently replaced the 4 18GB drives one at a time in my HP NetServer with 73 GB drives. The capacity shows up as the original 54 GB. I check the drives with disk manager and no additional unused space appears. How do I get the unused space to appear so I can create another volume or expand an...

    Jabate0 pointsBadges:
  • Installing RAID 1 on XP machines or use server software?

    We have a mission critical robot on the production line that is run by 3 pc quality machines running NT4 workstation. They are referred to as A B and C It has crashed 2 times in the last year. Both times it was the motherboard on PC B. This machine runs 24x7. The IT department has not had much...

    Jtennyson0 pointsBadges:
  • Upgrading Computer Motherboard that currently has two RAID 0 setups

    I will be upgrading my computer components with a new motherboard and currently have a RAID-0 setup with my old mb's built-in Promise FastTrak 378 controller. I also have a Promise FastTrak TX4310 pci card controller with another RAID-0 setup. Both have two drives each. Will I lose data on either...

    Mgbtp5 pointsBadges:
  • Exchange restores from swapped raid 1 drives

    My question relates to hardware and exchange. In this scenario I would be running a set of hotswap raid 1 drives: one with exchange and the information store databases and another with transaction logs. If my Information store were to become corrupt and I loaded a backup set of drives with the...

    Arakes0 pointsBadges:
  • Installing Win2003 Server on a RAID Disk

    Can WIN2003 Server be installed on a disk that is part of a RAID 0 or RAID 1 array? I am trying to install Win2003 Server on an IBM eServer series X206. I have two 80 GIG SATA drives attached to a SATA RAID controller and have them both defined as members of the array. I tried both RAID 0 and RAID...

    RONSCHMIDT0 pointsBadges:
  • Upgradation of raid

    hi all how can i upgrade my raid level 1 to level 5 without loss any data and policy in domain controller regards mukesh

    Mukeshsingh20 pointsBadges:
  • New way of handling RAID 5?

    As an Oracle DBA, I have heard and read a lot about RAID 5 and what it can do to database write performance. Now I understand RAID 5 has been improved to the point that all of the things that caused the overhead are now being handled in disk cache, and write times are now close to that of RAID 0+1....

    Mljsher0 pointsBadges:
  • Boot drive failure, but RAID is okay

    I had to replace my boot drive. Reinstalled Win XP. System found all the drives, but I can not access the RAID. BIOS loads the Adaptec 1200 Raid, I guess from the PCI Card. In Device Mgr, it sees two identical drives RAID 0, but I can not access them. What am I doing wrong? How can I get the two...

    TNchicklet15 pointsBadges:
  • RAID 1 – How to upgrade disks

    Hi there, I'm currently running a Windows Server 2003 (web edition) box which runs 2 8GB U320 SCSI disks, which make up a RAID 1 array. On this array, is a C: and D: logical drive, C being my OS and applications, D being my data. I've just purchased 2 148GB drives, which I now want to swap in to...

    Linger19740 pointsBadges:
  • Best RAID for Database Server

    We have 70+ users connecting almost 125 machines to connect to an Intel 5000VSA 4dimm Board Server with 2 Xeon processors, 6 SATA (on-board RAID 0, 5 or 10), 1 IDE port. I want to put the best possible RAID with 200/250GB SATA drives, with Best Redundancy and Performance, irrespective of the cost....

    Mkanjani5 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following