• RAID 5 and three-way mirroring

    Our Spac solaris 10 box has only three disks (budge limitation), and they were configured with hardware RAID 1 (3-way). Obviously, the disk performance is going to suffer since both OS and DATA will live on the same mirrored disks, however, this part of disk configuration puzzles me even more: a...

    SearchStorageATE215 pointsBadges:
  • RAID 5 and disk capacity

    You mention that fewer than four disks (three) on RAID-5 isn't worth it. Why?

    SearchStorageATE215 pointsBadges:
  • x3400 ibm server linux install with raid 1

    i have X3400 IBM server, i just want to install (red hat 4 es) with RAID 1 , But when i configure raid 1 and boot with linux cd after booting when i press on manual partition error showing that no Hard disk was found. BUT in BIOS , IN controll A Utility Harddisk was shown. HOw i rectify this...

    11419855 pointsBadges:
  • installing a raid controller

    i have a server ml150 HP running windows 2003 that has a single hard drive. i want to intergrate a raid controller E200 smart array without loosing my data. i want to add two more hard drives. and configure raid 5.

    Chabzy10 pointsBadges:
  • Raid 5 How do I setup?

    I have a server with four drives and I want to install a raid 5 configuration Do i need to keep one disk at a different volume, not raid 5, to run the OS ?

    Cfhicks5 pointsBadges:
  • RAID 1 with 4 SATA II drives

    I have a M/B with an integrated nVidia SATA II RAID controller. The M/B died the other day leaving me in a pickle. In an act of desparation, I took the four SATA II drives out of the server and put them into another server with a similar nVidia SATA II RAID controller. To my surprise, it worked....

    Breusshe5 pointsBadges:
  • Windows 2003 Enterprise server not seeing new HDrives

    Hi there. We have a windows 2003 server here in the office that we just put 4 new 34.6gb HDs in for a total of 6. The drives are running RAID 5. When we first put them in the HP system management software the admin uses to track the RAID arrays and what not had the new ones listed as in Logical...

    Mobojo20 pointsBadges:
  • Windows XP SP2 installation problem on Dell PowerEdge 2850 server

    When I try to install XP on the server, it seems like windows can't find any hard drive, so as soon as you press enter to setup, you don't see any disk to format whatsoever? Does anybody ever experienced this kind of problem, if so can you please give me a solution to this problem cause it really...

    Imsupport35 pointsBadges:
  • RAID stripe and cluster size configuration

    Does anyone know some way of testing/ tuning the best performance out of a DAS RAID. ie. Different Stripes and formatted clusters for the different types of raid.

    PaulRudge15 pointsBadges:
  • Data Dictionary Update

    We had an external raid fail that had plenty of data. We have since unmounted the raid. However, the data dictionary views are still seeing this drive and are therefore giving an error when trying to query the views. How can we update the data dictionary?????

    Tferri5 pointsBadges:
  • RAID 5 configuration on Dell PowerEdge 2800 hard disk failure

    Using DELL Poweredge 2800 with a Raid 5 configuration of 2 hard drives capacity 85GB Ultra 320 SCSI. Hard disks have been showing failure. I tried to bring the hard drives ONLINE by FORCE option provided in the utility manager to configure RAID and got the hard drives up but couldn't login to...

    ITKE350,790 pointsBadges:
  • VRAID vs RAID

    What are the basic differences between VRAID and RAID?

    Nagar5 pointsBadges:
  • RAID management with IBM System x3400

    hi iam new here and i have some questions to all of you who is working on RAID. 1. i have x3400 IBM SERVER and it has 2 disk with 74 GB each while installing with server cd the only availabel option raid 1 i selected that and after that i install w2k3 server standard editions now i want to make it...

    159357212325 pointsBadges:
  • RAID 5 offers what type of fault tolerance

    what is fault tolerance and raid 5 and raid 1 offer what type of fault tolerance

    Dfv5 pointsBadges:
  • Adding an additonal Fibre channel card on XServe G5

    I have tape library that connects via fibre channel. When I set up the tape library, I've connected it to an open port on a QLogic fibre channel switch that had an XServer G5 and seven RAIDS. The tape library is running into speed and connection issues when the RAIDs are being hit with a lot of...

    ITKE350,790 pointsBadges:
  • Loading Windows Server 2003 – Raid 5 (3 X 500Gb Drives)

    Please forgive my ignorance, I usually deal in code and applications, servers and loading OS's onto them is like talking Klingon to me right now, but I'm learning. I was stupid enough to buy a Dell PowerEdge 800 server with 3 x 500Gb disks already installed (and configured) as a RAID 5. I could...

    TR20 pointsBadges:
  • Raid 0 Migrating – RAID mode in BIOS causes BSOD

    I have a Dell xps 420 that came with Vista 32 bit. I have switched over to Vista 64 bit (and as far as I can tell updated all my drivers). I want to run raid 0. I would like to use the Migrating feture and avoid having to do a fresh re-install. The issue I am having is every time I enable raid mode...

    Williamsson60 pointsBadges:
  • Looking for NAS solution

    I have a number of IDE drives (between 250GB - 500GB) that I have out grown over the years. I was curious whether anyone is aware of a NAS (100/GB Int) device or similar chasis / enclosure (USB/Firewire) that accepts IDE drives and is affordable? I would prefer to have all three connections. I need...

    ITKE350,790 pointsBadges:
  • Trouble creating a RAID array with VMWare ESX3i

    Hi, We’ve set up VMWare ESX3i on a single disk on our HP DL140 Server. We’re now trying to set up a RAID array, using the in-built LSI Logic SAS1068 RAID controller. Unfortunately, it says that there’s not enough space at the end of the disk, and it would need to be formatted, in order to...

    Vmwareuser20 pointsBadges:
  • Can RAID 0 volume be deleted and re-added with no data loss?

    I have a Dell Precision 690 Workstation with an LSI Integrated RAID controller. I have a 2-disk RAID 0 (what LSI refers to as an IS or Integrated Striping) volume. Recently the motherboard was replaced (and the RAID controller is integrated onto the motherboard). Ever since the motherboard...

    Rsheldon6215 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following