• I can’t show RAID in boot sequence

    Hello, I'm not able to detected RAID in boot sequence, so what am I doing wrong?

    server200815 pointsBadges:
  • From mirror to RAID

    Hi there folks, A client's system has disks with mirror protection. The goal is to stop the mirror protection and start RAID5 with hot spare. I'm going to enter DST, stopr mirror and then start RAID with hot spare. Do I need anything else? Thank you all for your help.

    Aringarosa295 pointsBadges:
  • Is a 3 drive RAID 5 array a good idea?

    I am specifying a new server and have been told that a 3 drive RAID 5 array is not a good idea as I will not have a bootable drive in the event of a array controller failure. A better idea is O/S on a RAID1 mirror with apps too, and data on RAID 5 array of 3 drives. Any comments please.

    Matty751215 pointsBadges:
  • RAID to HP Proliant DL360 G5 server

    How can I configure RAID setup to HP Proliant DL360 G5 server? Please can someone help me? Thanks!

    Reggie065 pointsBadges:
  • Replace failed disk

    Hi guys, need your help once more. I need to replace a failed disk (RAID 5). I'm not shore how to do it, should I use navigator or DST? Need to stop RAID first? I already have the document with the steps to rebuild data on the new disk, just don't know what to do before that. Tanks in advance,...

    Aringarosa295 pointsBadges:
  • How to create backup RAID configuration?

    Hello everybody. I am studying about Hard RAID. I want to backup RAID configuration and save it to my USB or FDD, so how to do it? Is RAID configuration only in RAID card?

    Officer5 pointsBadges:
  • Writing to block device is *slower* than writing to the filesystem?

    Hi all, We have a new machine with 3ware 9650SE controllers and I am testing hardware RAID and linux software MD raid performances. For now I am on hardware RAID. I have setup a raid-0 with 14 drives. If I create an xfs filesystem on it (whole device, no partitioning, aligned stripes during mkfs,...

    ITKE356,045 pointsBadges:
  • Installation time for disk drives

    How much time should be allocated to install a 5095 with one 2780 PCI-X Ultra RAID Disk Controller and 12 - 4327 70.56GB 15k rpm Disk Drives?

    DAB65 pointsBadges:
  • RAID Benefits

    What are the benefits of implementing RAID?

    elmundodeit20 pointsBadges:
  • Windows Server 2003 system state.

    Hi guys. This is my first post but I have read lots on the site which has helped loads so thank you!! I have a Windows 2003 Small Business Edition server which was running a Raid5 up until a few days ago. Unfortunately it suffered 2hdd failures over a weekend and so I could not repair the raid as...

    Natedoggy5 pointsBadges:
  • doubts about raid

    Can we use two raid groups at a time in a storage system? ie can we use both raid 10 and raid 6 on the same set of drives?

    vibes150 pointsBadges:
  • Raid 10

    I have a raid 10 4 drive array. Can I add more drives to this setup?

    Sampla0 pointsBadges:
  • Adding HP SAN P4000G2 to an existing cluster????

    I appologize in advance for my newb terminology but I have no experince in this at all. I have an environment running on vmware esxi 4.1 and HP lefthand san p4000 g2. currently their san is set RAID5 with one LUN and two datastores but they are running out of space and getting some major DISK IO...

    Hassan78875 pointsBadges:
  • What are the signs my RAID array is dying?

    What are the signs that my RAID array is dying? Are there checks I can run? Can I add a hot spare to a RAID array with 6 disks in it? Will this help if one drive fails? What if multiple drives fail, what do I do then?

    ITKE356,045 pointsBadges:
  • storage

    Hi , I am mahesh.j a fresher , i would like build my carrier on storage .where i am familer to storage hardware now i would like expertise on it.My question is that how to be expertise on it, so i would request u all help me on it by ur guidlines. what are platform of operating system,application...

    Sjmahesh0 pointsBadges:
  • RAID – Upgrading disks to larger ones

    Hi all, I wrote not long ago about the best way to upgrade disks when using RAID1. I've now managed to copy all contents from my 2 original volumes, into 2 identical (but larger) volumes on the new larger disk. I used Ghost for this, by making a backup of first the system volume, then the data...

    Linger19740 pointsBadges:
  • Continual CHKDSK errors

    I've recently scheduled a daily procedure (CMD) to run on a test group of PCs (including one server with mirrored drives) that runs CHKDSK early every morning. While running under Windows, if it finds errors, it will shutdown/restart and CHKDSK /F will be run to repair the errors. Out of a group of...

    JWhatley0 pointsBadges:
  • Raid 0 Set up internal to external drive

    I have a Dell 420xps. It came with a 320gb sata drive. I have added a 500gb "internal" hard drive. I also added a 250gb USB "external" hard drive and a 500gb eSata "external" hard drive. I would like to run raid 0 on the 500gb internal and 500gb external and leave the other 2 as they are. Can this...

    Williamsson60 pointsBadges:
  • PSM LUN RAID type

    What is the Raid Tpe of PSM LUN and what it contains exactly?

    SANsupport5 pointsBadges:
  • loading raid drivers with no floppy

    building new server to replace a dead one using ent serv 2003. new server doesn't have floppy and when loading os I f6 when prompted but cannot load raid drivers without floppy. have floppy copied to usb drive, could use some help on how to continue.

    uwantfries60 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following