• Taking and restoring Ghost image for Windows in RAID 5

    I want to take Ghost image for windows in RAID5 and able to restore the image again when the system fails or something happened in the drive.

    Mizomotaz40 pointsBadges:
  • What does EMC recommend as best RAID group for RAID 6, (8+2)?

    What do EMC recommend as best practices for number of disks in a raid group for RAID 6, (8+2) with SATA drives with A CX3 Clariion array?

    VIP095 pointsBadges:
  • Dell Poweredge 2800 will not reboot after RAID 5 install

    I have a Dell Poweredge 2800. My situation is that i added 2 hard drives and setup Raid 5 successfully. I installed windows server 2003 and it finds the drives. "a disk read error has occurred" Any help?

    ITKE56,495 pointsBadges:
  • Calculating real MB’s in physical and virtual world

    How do I calculate real MB's in physical and virtual world?

    PArdana5 pointsBadges:
  • Reset disks to Non-RAID

    Can LaCie's 2big Thunderbolt Series 2-Bay RAID Hard Drive, be reset to a "non-raid" operation? Deleting the RAID configuration. Allowing the use of the TWO HDD's as separate HDD's?

    billkorbet5 pointsBadges:
  • RAID

    What are the different types of RAID?

    ForeignerAmet5 pointsBadges:
  • VMware ESX went read only. Is there a way to save my VMs?

    I'm currently using two RAID volumes. RAID 1 is currently running a VMware Kernel console while RAID 5 has VMDKS live. When I'm trying to log into the console, it keeps giving me SCSI errors with no password prompt. But the VMs are actually still running!But I'm thinking if I restart, the Kernel...

    ITKE56,495 pointsBadges:
  • Database all about RAID introduction including annotated diagrams

    Can someone help me with this question: RAID Levels, Hardware issues,choice of RAID level and improvement in performance via parallelism

    cos5 pointsBadges:
  • How to reduce or eliminate CHKDSK scan times on large SAN volumes?

    I'm currently evaluating upgrade options for our primary Windows server storage volumes. I am trying to build in a solution in the upgrade to the problem of the time it takes to run CHKDSK on large, busy volumes mounted on Windows. In the days when storage volumes were up to a few hundred MB of DAS...

    ITKE56,495 pointsBadges:
  • HP Server configuration

    Hi all, How we configure RAID Controller configuration & other settings on HP Proliant Server Without HP Smart CD. Thanks in advance!

    Loganoop20 pointsBadges:
  • Exchange 2003 server running on Windows Server 2003 that is running out of space on the system partition

    I have an Exchange 2003 server running on Windows Server 2003 that is running out of space on the system partition. I have a RAID 5 configuration. I want to replace the drives with larger ones and resize the partitions in the process. I had two thoughts as a way to do this. One would be to install...

    ITKE56,495 pointsBadges:
  • Windows server 2003 installation problem

    I have to install Windows 2003 in a server machine. It contains SCSI hard disks and the Hard Disk is connected to the motherboard with RAID controller Card. When I try to install windows 2003, the OS is not recognize the Hard Disks. So I can't install the Operating System to the server machine.

    Ratheeshsivam15 pointsBadges:
  • Is there any fault tolerances

    Is there any fault tolerances (such as RAID) built into NAS devices?

    bjhocker20 pointsBadges:
  • I can’t show RAID in boot sequence

    Hello, I'm not able to detected RAID in boot sequence, so what am I doing wrong?

    server200815 pointsBadges:
  • From mirror to RAID

    Hi there folks, A client's system has disks with mirror protection. The goal is to stop the mirror protection and start RAID5 with hot spare. I'm going to enter DST, stopr mirror and then start RAID with hot spare. Do I need anything else? Thank you all for your help.

    Aringarosa295 pointsBadges:
  • Is a 3 drive RAID 5 array a good idea?

    I am specifying a new server and have been told that a 3 drive RAID 5 array is not a good idea as I will not have a bootable drive in the event of a array controller failure. A better idea is O/S on a RAID1 mirror with apps too, and data on RAID 5 array of 3 drives. Any comments please.

    Matty751215 pointsBadges:
  • RAID to HP Proliant DL360 G5 server

    How can I configure RAID setup to HP Proliant DL360 G5 server? Please can someone help me? Thanks!

    Reggie065 pointsBadges:
  • Replace failed disk

    Hi guys, need your help once more. I need to replace a failed disk (RAID 5). I'm not shore how to do it, should I use navigator or DST? Need to stop RAID first? I already have the document with the steps to rebuild data on the new disk, just don't know what to do before that. Tanks in advance,...

    Aringarosa295 pointsBadges:
  • How to create backup RAID configuration?

    Hello everybody. I am studying about Hard RAID. I want to backup RAID configuration and save it to my USB or FDD, so how to do it? Is RAID configuration only in RAID card?

    Officer5 pointsBadges:
  • Writing to block device is *slower* than writing to the filesystem?

    Hi all, We have a new machine with 3ware 9650SE controllers and I am testing hardware RAID and linux software MD raid performances. For now I am on hardware RAID. I have setup a raid-0 with 14 drives. If I create an xfs filesystem on it (whole device, no partitioning, aligned stripes during mkfs,...

    ITKE56,495 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following